[ 0.000000] Linux version 4.18.0-kali2-amd64 (devel@kali.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.10-2kali1 (2018-10-09) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali2-amd64 root=/dev/sdb1 ro initrd=/install/gtk/initrd.gz quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA770-ES3/GA-MA770-ES3, BIOS F4 05/14/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f41e0-0x000f41ef] mapped at [(____ptrval____)] [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1e04b000, 0x1e04bfff] PGTABLE [ 0.000000] BRK [0x1e04c000, 0x1e04cfff] PGTABLE [ 0.000000] BRK [0x1e04d000, 0x1e04dfff] PGTABLE [ 0.000000] BRK [0x1e04e000, 0x1e04efff] PGTABLE [ 0.000000] BRK [0x1e04f000, 0x1e04ffff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33821000-0x35c07fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5C10 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFDF3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFDF3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFDF30C0 0071B8 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040 [ 0.000000] ACPI: HPET 0x00000000CFDFA340 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFDFA380 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000CFDFA3C0 00038A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000CFDFA280 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff] [ 0.000000] Reserved but unavailable: 626 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff] [ 0.000000] On node 0 totalpages: 1047950 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13240 pages used for memmap [ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144 [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031553 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali2-amd64 root=/dev/sdb1 ro initrd=/install/gtk/initrd.gz quiet [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x2060000000-0x2061ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 3933548K/4191800K available (10252K kernel code, 1223K rwdata, 3260K rodata, 1548K init, 656K bss, 258252K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 31267 entries in 123 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2760.447 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27ca4cb528f, max_idle_ns: 440795329868 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5520.89 BogoMIPS (lpj=11041788) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024000] mce: CPU supports 6 MCE banks [ 0.024000] LVT offset 0 assigned for vector 0xf9 [ 0.024000] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.024000] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.024000] Spectre V2 : Mitigation: Full AMD retpoline [ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.024000] Freeing SMP alternatives memory: 24K [ 0.036000] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms [ 0.036000] APIC delta adjusted to PM-Timer: 1437585 (1407653) [ 0.036000] smpboot: CPU0: AMD Phenom(tm) 9750 Quad-Core Processor (family: 0x10, model: 0x2, stepping: 0x3) [ 0.036000] Performance Events: AMD PMU driver. [ 0.036000] ... version: 0 [ 0.036000] ... bit width: 48 [ 0.036000] ... generic registers: 4 [ 0.036000] ... value mask: 0000ffffffffffff [ 0.036000] ... max period: 00007fffffffffff [ 0.036000] ... fixed-purpose events: 0 [ 0.036000] ... event mask: 000000000000000f [ 0.036000] Hierarchical SRCU implementation. [ 0.036000] smp: Bringing up secondary CPUs ... [ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.036000] x86: Booting SMP configuration: [ 0.036000] .... node #0, CPUs: #1 [ 0.004000] do_IRQ: 1.55 No irq handler for vector [ 0.036000] #2 [ 0.004000] do_IRQ: 2.55 No irq handler for vector [ 0.036107] #3 [ 0.004000] do_IRQ: 3.55 No irq handler for vector [ 0.040086] smp: Brought up 1 node, 4 CPUs [ 0.040086] smpboot: Max logical packages: 2 [ 0.040086] smpboot: Total of 4 processors activated (22083.57 BogoMIPS) [ 0.042005] devtmpfs: initialized [ 0.042005] x86/mm: Memory block size: 128MB [ 0.042005] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes) [ 0.042005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.042005] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.042005] pinctrl core: initialized pinctrl subsystem [ 0.042005] NET: Registered protocol family 16 [ 0.042005] audit: initializing netlink subsys (disabled) [ 0.042005] audit: type=2000 audit(1542347184.040:1): state=initialized audit_enabled=0 res=1 [ 0.044023] cpuidle: using governor ladder [ 0.044023] cpuidle: using governor menu [ 0.044023] node 0 link 0: io port [c000, ffff] [ 0.044023] TOM: 00000000d0000000 aka 3328M [ 0.044023] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.044023] node 0 link 0: mmio [a0000, bffff] [ 0.044023] node 0 link 0: mmio [d0000000, dfffffff] [ 0.044023] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.044023] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.044023] TOM2: 0000000130000000 aka 4864M [ 0.044023] bus: [bus 00-03] on node 0 link 0 [ 0.044023] bus: 00 [io 0x0000-0xffff] [ 0.044024] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.044025] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.044026] bus: 00 [mem 0xe0400000-0xffffffff] [ 0.044026] bus: 00 [mem 0xe0100000-0xe03fffff] [ 0.044027] bus: 00 [mem 0x130000000-0xfcffffffff] [ 0.044043] ACPI: bus type PCI registered [ 0.044043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.044100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.044103] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.044119] PCI: Using configuration type 1 for base access [ 0.044170] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.044171] mtrr: probably your BIOS does not setup all CPUs. [ 0.044171] mtrr: corrected configuration. [ 0.044842] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.044842] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.044842] ACPI: Added _OSI(Module Device) [ 0.044842] ACPI: Added _OSI(Processor Device) [ 0.044842] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.044842] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044842] ACPI: Added _OSI(Linux-Dell-Video) [ 0.048795] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.048915] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.048958] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.048999] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049039] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049081] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.049122] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049160] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049197] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.049242] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049280] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049321] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.049361] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.049406] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049452] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.049494] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.049535] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049582] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.049629] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.049670] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049712] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049757] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.049803] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049845] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.049886] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.049935] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.049976] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.050021] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.050062] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.050108] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.050155] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.050196] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.050237] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.050284] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.050330] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.050372] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.050414] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.050460] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.050506] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.050547] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.050589] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.050635] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20180531/dspkginit-414) [ 0.050676] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20180531/dspkginit-414) [ 0.050718] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414) [ 0.050759] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20180531/dspkginit-414) [ 0.052328] ACPI: Interpreter enabled [ 0.052349] ACPI: (supports S0 S3 S4 S5) [ 0.052351] ACPI: Using IOAPIC for interrupt routing [ 0.052415] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.052544] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.058395] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.058402] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.058406] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.058654] PCI host bridge to bus 0000:00 [ 0.058656] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.058658] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.058660] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.058661] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.058662] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.058664] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.058673] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 0.058686] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.058782] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.058798] pci 0000:00:02.0: enabling Extended Tags [ 0.058820] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.058908] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.058924] pci 0000:00:0a.0: enabling Extended Tags [ 0.058944] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.059032] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.059053] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.059061] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.059070] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.059079] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.059087] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.059096] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.059117] pci 0000:00:11.0: set SATA to AHCI mode [ 0.059219] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.059236] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.059361] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.059378] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.059507] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.059527] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.059603] pci 0000:00:12.2: supports D1 D2 [ 0.059605] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.059694] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.059710] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.059832] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.059849] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.059977] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.060007] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.060084] pci 0000:00:13.2: supports D1 D2 [ 0.060085] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.060171] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.060328] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.060347] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.060355] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.060364] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.060372] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.060380] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.060399] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.060400] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.060402] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.060403] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.060499] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.060523] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.060587] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.060663] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.060802] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.060914] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.060930] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.061059] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.061130] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.061199] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.061267] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.061342] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.061451] pci 0000:01:00.0: [1002:679a] type 00 class 0x030000 [ 0.061469] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.061481] pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit] [ 0.061486] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff] [ 0.061495] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.061500] pci 0000:01:00.0: enabling Extended Tags [ 0.061539] pci 0000:01:00.0: supports D1 D2 [ 0.061540] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.061602] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.061617] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.061641] pci 0000:01:00.1: enabling Extended Tags [ 0.061672] pci 0000:01:00.1: supports D1 D2 [ 0.061741] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.061744] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.061746] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.061748] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.061785] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.061805] pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff] [ 0.061829] pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref] [ 0.061841] pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref] [ 0.061849] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.061906] pci 0000:02:00.0: supports D1 D2 [ 0.061907] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.061996] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.061998] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.062000] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.062003] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.062013] pci_bus 0000:03: extended config space not accessible [ 0.062072] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.062075] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.062079] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.062082] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.062083] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.062085] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.062086] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.062088] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.062089] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.062261] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.062261] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.062261] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.062261] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.062261] vgaarb: loaded [ 0.062261] pps_core: LinuxPPS API ver. 1 registered [ 0.062261] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.062261] PTP clock support registered [ 0.062261] EDAC MC: Ver: 3.0.0 [ 0.062261] PCI: Using ACPI for IRQ routing [ 0.072346] PCI: pci_cache_line_size set to 64 bytes [ 0.072398] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.072399] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff] [ 0.072507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.072507] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.074112] clocksource: Switched to clocksource tsc-early [ 0.084627] VFS: Disk quotas dquot_6.6.0 [ 0.084650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.084790] AppArmor: AppArmor Filesystem Enabled [ 0.084812] pnp: PnP ACPI init [ 0.084947] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.084949] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.084951] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.084957] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.085256] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.085259] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.085282] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.085284] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.085285] system 00:01: [io 0x040b] has been reserved [ 0.085287] system 00:01: [io 0x04d6] has been reserved [ 0.085288] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.085290] system 00:01: [io 0x0c14] has been reserved [ 0.085291] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.085292] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.085294] system 00:01: [io 0x0c6f] has been reserved [ 0.085295] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.085296] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.085298] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.085299] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.085301] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.085302] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.085303] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.085305] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.085307] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.085310] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.085465] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.085618] pnp 00:03: [dma 2] [ 0.085645] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.085852] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.086080] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.086186] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.086241] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.086245] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.086399] system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.086401] system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.086403] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.086404] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.086405] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 0.086407] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved [ 0.086408] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.086410] system 00:08: [mem 0x00100000-0xcfdeffff] could not be reserved [ 0.086411] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved [ 0.086413] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved [ 0.086414] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.086416] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.086417] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.086421] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.086438] pnp: PnP ACPI: found 9 devices [ 0.092480] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.092505] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.092508] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.092510] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.092512] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.092514] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.092517] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 0.092519] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.092520] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.092522] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.092524] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.092527] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.092529] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.092534] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.092537] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 0.092544] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.092545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.092546] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.092548] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.092549] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.092550] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.092551] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.092553] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.092554] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.092556] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.092557] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.092558] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.092559] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.092561] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 0.092562] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.092563] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.092565] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.092566] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.092567] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.092646] NET: Registered protocol family 2 [ 0.092825] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.092849] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.092946] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.093096] TCP: Hash tables configured (established 32768 bind 32768) [ 0.093159] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.093185] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.093259] NET: Registered protocol family 1 [ 0.173549] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6b0 took 78378 usecs [ 0.253543] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6b0 took 78101 usecs [ 0.333531] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6b0 took 77900 usecs [ 0.413526] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6b0 took 78102 usecs [ 0.493516] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6b0 took 77890 usecs [ 0.493541] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.493554] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.493564] PCI: CLS 64 bytes, default 64 [ 0.493649] Unpacking initramfs... [ 1.078404] Freeing initrd memory: 36764K [ 1.078847] PCI-DMA: Disabling AGP. [ 1.078921] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.078922] PCI-DMA: using GART IOMMU. [ 1.078924] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.082547] LVT offset 1 assigned for vector 0x400 [ 1.082558] LVT offset 1 assigned [ 1.082622] perf: AMD IBS detected (0x00000007) [ 1.083252] Initialise system trusted keyrings [ 1.083296] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 1.084646] zbud: loaded [ 1.084820] pstore: using deflate compression [ 1.514133] Key type asymmetric registered [ 1.514135] Asymmetric key parser 'x509' registered [ 1.514180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.514223] io scheduler noop registered [ 1.514224] io scheduler deadline registered [ 1.514298] io scheduler cfq registered (default) [ 1.514299] io scheduler mq-deadline registered [ 1.514768] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.515047] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.535594] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.536047] Linux agpgart interface v0.103 [ 1.536081] AMD IOMMUv2 driver by Joerg Roedel [ 1.536081] AMD IOMMUv2 functionality not available on this system [ 1.536426] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.536426] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.536587] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.536671] mousedev: PS/2 mouse device common for all mice [ 1.536714] rtc_cmos 00:02: RTC can wake from S4 [ 1.536845] rtc_cmos 00:02: registered as rtc0 [ 1.536861] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.536900] ledtrig-cpu: registered to indicate activity on CPUs [ 1.537394] NET: Registered protocol family 10 [ 1.541758] Segment Routing with IPv6 [ 1.541779] mip6: Mobile IPv6 [ 1.541782] NET: Registered protocol family 17 [ 1.541787] mpls_gso: MPLS GSO support [ 1.542079] microcode: CPU0: patch_level=0x01000095 [ 1.542084] microcode: CPU1: patch_level=0x01000095 [ 1.542090] microcode: CPU2: patch_level=0x01000095 [ 1.542097] microcode: CPU3: patch_level=0x01000095 [ 1.542137] microcode: Microcode Update Driver: v2.2. [ 1.542147] sched_clock: Marking stable (1542131646, 0)->(1915682707, -373551061) [ 1.542317] registered taskstats version 1 [ 1.542317] Loading compiled-in X.509 certificates [ 1.564056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.598282] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 1.598303] zswap: loaded using pool lzo/zbud [ 1.598370] AppArmor: AppArmor sha1 policy hashing enabled [ 1.598727] rtc_cmos 00:02: setting system clock to 2018-11-16 05:46:26 UTC (1542347186) [ 1.601319] Freeing unused kernel image memory: 1548K [ 1.620031] Write protecting the kernel read-only data: 16384k [ 1.620932] Freeing unused kernel image memory: 2028K [ 1.621249] Freeing unused kernel image memory: 836K [ 1.630123] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.782356] Floppy drive(s): fd0 is 1.44M [ 1.787648] SCSI subsystem initialized [ 1.788745] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.788798] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.790400] ACPI: bus type USB registered [ 1.790434] usbcore: registered new interface driver usbfs [ 1.790443] usbcore: registered new interface driver hub [ 1.790486] usbcore: registered new device driver usb [ 1.791549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.792247] ehci-pci: EHCI PCI platform driver [ 1.792531] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.792542] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.792551] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.792561] ehci-pci 0000:00:12.2: debug port 1 [ 1.792626] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.794643] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.794653] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.794773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.795080] r8169 0000:02:00.0 eth0: RTL8168d/8111d, 1c:6f:65:80:59:93, XID 283000c0, IRQ 24 [ 1.795083] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.795538] libata version 3.00 loaded. [ 1.797360] ahci 0000:00:11.0: version 3.0 [ 1.797552] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.797554] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.798100] scsi host0: pata_atiixp [ 1.798371] scsi host1: ahci [ 1.798864] scsi host2: pata_atiixp [ 1.798910] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.798911] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.803366] scsi host3: ahci [ 1.804192] FDC 0 is a post-1991 82077 [ 1.804275] scsi host4: ahci [ 1.806133] scsi host5: ahci [ 1.806242] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.806244] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.806247] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.806249] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.812016] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.812069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.812071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.812072] usb usb1: Product: EHCI Host Controller [ 1.812073] usb usb1: Manufacturer: Linux 4.18.0-kali2-amd64 ehci_hcd [ 1.812074] usb usb1: SerialNumber: 0000:00:12.2 [ 1.812198] hub 1-0:1.0: USB hub found [ 1.812204] hub 1-0:1.0: 6 ports detected [ 1.812589] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.812595] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.812598] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.812609] ehci-pci 0000:00:13.2: debug port 1 [ 1.812661] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.828017] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.828055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.828056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.828058] usb usb2: Product: EHCI Host Controller [ 1.828059] usb usb2: Manufacturer: Linux 4.18.0-kali2-amd64 ehci_hcd [ 1.828060] usb usb2: SerialNumber: 0000:00:13.2 [ 1.828162] hub 2-0:1.0: USB hub found [ 1.828167] hub 2-0:1.0: 6 ports detected [ 1.828690] ohci-pci: OHCI PCI platform driver [ 1.829343] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.829352] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.829394] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.892062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.892064] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.892065] usb usb3: Product: OHCI PCI host controller [ 1.892066] usb usb3: Manufacturer: Linux 4.18.0-kali2-amd64 ohci_hcd [ 1.892067] usb usb3: SerialNumber: 0000:00:12.0 [ 1.892173] hub 3-0:1.0: USB hub found [ 1.892181] hub 3-0:1.0: 3 ports detected [ 1.892421] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.892425] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.892442] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.956052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 1.956054] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.956055] usb usb4: Product: OHCI PCI host controller [ 1.956056] usb usb4: Manufacturer: Linux 4.18.0-kali2-amd64 ohci_hcd [ 1.956057] usb usb4: SerialNumber: 0000:00:12.1 [ 1.978889] hub 4-0:1.0: USB hub found [ 1.978897] hub 4-0:1.0: 3 ports detected [ 1.979165] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.979170] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.979203] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.981724] ata1.01: HPA detected: current 156365903, native 156368016 [ 1.981727] ata1.01: ATA-7: SAMSUNG SP0812N, TK100-30, max UDMA/100 [ 1.981729] ata1.01: 156365903 sectors, multi 16: LBA48 [ 1.984707] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0812N 0-30 PQ: 0 ANSI: 5 [ 1.985831] sd 0:0:1:0: [sda] 156365903 512-byte logical blocks: (80.1 GB/74.6 GiB) [ 1.985838] sd 0:0:1:0: [sda] Write Protect is off [ 1.985839] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.985846] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.995109] sda: sda1 [ 1.995370] sd 0:0:1:0: [sda] Attached SCSI disk [ 2.040053] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.040055] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.040056] usb usb5: Product: OHCI PCI host controller [ 2.040057] usb usb5: Manufacturer: Linux 4.18.0-kali2-amd64 ohci_hcd [ 2.040059] usb usb5: SerialNumber: 0000:00:13.0 [ 2.040160] hub 5-0:1.0: USB hub found [ 2.040168] hub 5-0:1.0: 3 ports detected [ 2.040422] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.040427] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.040448] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.104054] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.104056] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.104057] usb usb6: Product: OHCI PCI host controller [ 2.104058] usb usb6: Manufacturer: Linux 4.18.0-kali2-amd64 ohci_hcd [ 2.104059] usb usb6: SerialNumber: 0000:00:13.1 [ 2.104146] hub 6-0:1.0: USB hub found [ 2.104153] hub 6-0:1.0: 3 ports detected [ 2.104359] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.104364] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.104386] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.112019] tsc: Refined TSC clocksource calibration: 2760.151 MHz [ 2.112025] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27c934e2369, max_idle_ns: 440795288746 ns [ 2.112042] clocksource: Switched to clocksource tsc [ 2.118347] ata5: SATA link down (SStatus 0 SControl 300) [ 2.118379] ata4: SATA link down (SStatus 0 SControl 300) [ 2.118431] ata6: SATA link down (SStatus 0 SControl 300) [ 2.168051] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.168052] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.168053] usb usb7: Product: OHCI PCI host controller [ 2.168054] usb usb7: Manufacturer: Linux 4.18.0-kali2-amd64 ohci_hcd [ 2.168055] usb usb7: SerialNumber: 0000:00:14.5 [ 2.168144] hub 7-0:1.0: USB hub found [ 2.168151] hub 7-0:1.0: 2 ports detected [ 2.280033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.280623] ata3.00: ATA-10: WDC WD10EZEX-08WN4A0, 01.01A01, max UDMA/100 [ 2.280625] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.281261] ata3.00: configured for UDMA/100 [ 2.281455] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5 [ 2.281621] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.281623] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.281629] sd 1:0:0:0: [sdb] Write Protect is off [ 2.281630] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.281638] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.330931] sdb: sdb1 sdb2 < sdb5 > sdb3 [ 2.331254] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.376025] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 2.472019] usb 6-2: new low-speed USB device number 2 using ohci-pci [ 2.573019] usb 3-1: New USB device found, idVendor=0458, idProduct=3019, bcdDevice= 1.00 [ 2.573022] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.573024] usb 3-1: Product: 10-Button USB Joystick [ 2.573025] usb 3-1: Manufacturer: Padix Co. Ltd. [ 2.578399] hidraw: raw HID events driver (C) Jiri Kosina [ 2.585225] usbcore: registered new interface driver usbhid [ 2.585227] usbhid: USB HID core driver [ 2.586310] input: Padix Co. Ltd. 10-Button USB Joystick as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:0458:3019.0001/input/input1 [ 2.586357] hid-generic 0003:0458:3019.0001: input,hidraw0: USB HID v1.00 Joystick [Padix Co. Ltd. 10-Button USB Joystick] on usb-0000:00:12.0-1/input0 [ 2.669010] usb 6-2: New USB device found, idVendor=046d, idProduct=c01d, bcdDevice=21.00 [ 2.669013] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.669015] usb 6-2: Product: USB-PS/2 Optical Mouse [ 2.669016] usb 6-2: Manufacturer: Logitech [ 2.677330] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:046D:C01D.0002/input/input2 [ 2.677400] hid-generic 0003:046D:C01D.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2/input0 [ 2.688802] PM: Image not found (code -22) [ 2.703543] cryptd: max_cpu_qlen set to 1000 [ 2.908024] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 2.939701] random: fast init done [ 2.970179] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 3.064371] usb 1-5: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 [ 3.064374] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.064647] hub 1-5:1.0: USB hub found [ 3.064742] hub 1-5:1.0: 4 ports detected [ 3.352023] usb 1-5.1: new high-speed USB device number 4 using ehci-pci [ 3.534529] usb 1-5.1: New USB device found, idVendor=046d, idProduct=082b, bcdDevice=28.c5 [ 3.534531] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.534532] usb 1-5.1: Product: Webcam C170 [ 3.534533] usb 1-5.1: Manufacturer: [ 3.640018] usb 1-5.3: new full-speed USB device number 5 using ehci-pci [ 3.764296] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 3.967574] usb 1-5.3: New USB device found, idVendor=047f, idProduct=c012, bcdDevice= 2.43 [ 3.967576] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.967577] usb 1-5.3: Product: Plantronics .Audio 628 USB [ 3.967578] usb 1-5.3: Manufacturer: Plantronics [ 3.991915] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.992065] systemd[1]: Detected architecture x86-64. [ 3.995741] systemd[1]: Set hostname to . [ 4.869695] random: systemd: uninitialized urandom read (16 bytes read) [ 4.869843] systemd[1]: Listening on Syslog Socket. [ 4.869912] random: systemd: uninitialized urandom read (16 bytes read) [ 4.869947] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.870013] random: systemd: uninitialized urandom read (16 bytes read) [ 4.870126] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.870187] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.870285] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.870355] systemd[1]: Listening on LVM2 metadata daemon socket. [ 4.875632] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.512837] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 5.549710] systemd-journald[257]: Received request to flush runtime journal from PID 1 [ 6.956507] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 6.956519] ACPI: Power Button [PWRB] [ 6.956590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 6.957014] ACPI: Power Button [PWRF] [ 6.957555] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 7.004885] parport_pc 00:05: reported by Plug and Play ACPI [ 7.004974] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.005545] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 7.005593] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.119044] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 7.140959] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 7.197182] [drm] radeon kernel modesetting enabled. [ 7.231341] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 7.231344] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 7.267919] [drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x174B:0xA003 0x00). [ 7.267969] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff [ 7.268350] ATOM BIOS: R9 [ 7.268393] [drm] Changing default dispclk from 500Mhz to 600Mhz [ 7.268403] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used) [ 7.268404] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF [ 7.268407] [drm] Detected VRAM RAM=3072M, BAR=256M [ 7.268408] [drm] RAM width 384bits DDR [ 7.268477] [TTM] Zone kernel: Available graphics memory: 2020350 kiB [ 7.268478] [TTM] Initializing pool allocator [ 7.268482] [TTM] Initializing DMA pool allocator [ 7.268502] [drm] radeon: 3072M of VRAM memory ready [ 7.268503] [drm] radeon: 2048M of GTT memory ready. [ 7.268512] [drm] Loading tahiti Microcode [ 7.291393] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6 [ 7.291422] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7 [ 7.291446] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 7.291472] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 7.291498] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 7.291521] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 7.311374] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 7.311377] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.311379] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.311380] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 7.311381] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 7.311382] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 7.311384] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 7.311386] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 7.311387] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 7.311388] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [ 7.314241] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_pfp.bin [ 7.325528] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_me.bin [ 7.325871] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_ce.bin [ 7.331121] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 7.331336] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 7.331360] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 7.331385] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 7.331409] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 7.331435] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 7.331472] snd_hda_intel 0000:00:14.2: device 1458:a002 is on the power_save blacklist, forcing power_save to 0 [ 7.339302] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_rlc.bin [ 7.343620] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_mc.bin [ 7.381643] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/tahiti_smc.bin [ 7.381653] [drm] Internal thermal controller with fan control [ 7.381750] [drm] probing gen 2 caps for device 1002:5978 = 300d02/0 [ 7.388205] [drm] radeon: dpm initialized [ 7.388262] kvm: Nested Virtualization enabled [ 7.388265] kvm: Nested Paging enabled [ 7.417011] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin [ 7.425454] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_vce.bin [ 7.426269] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 7.426288] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 7.429379] [drm] probing gen 2 caps for device 1002:5978 = 300d02/0 [ 7.429382] [drm] PCIE gen 2 link speeds already enabled [ 7.429608] MCE: In-kernel MCE decoding enabled. [ 7.450794] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 7.450936] radeon 0000:01:00.0: WB enabled [ 7.450939] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0x(____ptrval____) [ 7.450941] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0x(____ptrval____) [ 7.450942] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0x(____ptrval____) [ 7.450943] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0x(____ptrval____) [ 7.450945] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0x(____ptrval____) [ 7.451203] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x(____ptrval____) [ 7.458948] EDAC amd64: Node 0: DRAM ECC disabled. [ 7.458951] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 7.471180] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0x(____ptrval____) [ 7.471182] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0x(____ptrval____) [ 7.471186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.471187] [drm] Driver supports precise vblank timestamp query. [ 7.471188] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 7.471237] radeon 0000:01:00.0: radeon: using MSI. [ 7.471262] [drm] radeon: irq initialized. [ 7.638416] [drm] ring test on 0 succeeded in 1 usecs [ 7.638420] [drm] ring test on 1 succeeded in 1 usecs [ 7.638424] [drm] ring test on 2 succeeded in 1 usecs [ 7.638430] [drm] ring test on 3 succeeded in 3 usecs [ 7.638435] [drm] ring test on 4 succeeded in 3 usecs [ 7.641564] ppdev: user-space parallel port driver [ 7.827056] [drm] ring test on 5 succeeded in 2 usecs [ 7.827062] [drm] UVD initialized successfully. [ 7.936278] [drm] ring test on 6 succeeded in 21 usecs [ 7.936288] [drm] ring test on 7 succeeded in 3 usecs [ 7.936288] [drm] VCE initialized successfully. [ 7.936440] [drm] ib test on ring 0 succeeded in 0 usecs [ 7.936474] [drm] ib test on ring 1 succeeded in 0 usecs [ 7.936505] [drm] ib test on ring 2 succeeded in 0 usecs [ 7.936537] [drm] ib test on ring 3 succeeded in 0 usecs [ 7.936568] [drm] ib test on ring 4 succeeded in 0 usecs [ 7.947194] Adding 15904764k swap on /dev/sdb5. Priority:-2 extents:1 across:15904764k FS [ 8.121203] input: Plantronics Plantronics .Audio 628 USB as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.3/0003:047F:C012.0003/input/input18 [ 8.122743] media: Linux media interface: v0.10 [ 8.180204] plantronics 0003:047F:C012.0003: input,hiddev0,hidraw2: USB HID v1.00 Device [Plantronics Plantronics .Audio 628 USB] on usb-0000:00:12.2-5.3/input3 [ 8.239466] videodev: Linux video capture interface: v2.00 [ 8.361062] usbcore: registered new interface driver snd-usb-audio [ 8.544515] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b) [ 8.564313] uvcvideo 1-5.1:1.0: Entity type for entity Processing 2 was not initialized! [ 8.564316] uvcvideo 1-5.1:1.0: Entity type for entity Extension 6 was not initialized! [ 8.564318] uvcvideo 1-5.1:1.0: Entity type for entity Camera 1 was not initialized! [ 8.564383] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.1/1-5.1:1.0/input/input19 [ 8.564445] usbcore: registered new interface driver uvcvideo [ 8.564446] USB Video Class driver (1.1.1) [ 8.644148] [drm] ib test on ring 5 succeeded [ 9.152042] [drm] ib test on ring 6 succeeded [ 9.664035] [drm] ib test on ring 7 succeeded [ 9.664515] [drm] Radeon Display Connectors [ 9.664516] [drm] Connector 0: [ 9.664516] [drm] DP-1 [ 9.664517] [drm] HPD5 [ 9.664518] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 9.664519] [drm] Encoders: [ 9.664519] [drm] DFP1: INTERNAL_UNIPHY2 [ 9.664520] [drm] Connector 1: [ 9.664520] [drm] HDMI-A-1 [ 9.664521] [drm] HPD4 [ 9.664522] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 9.664522] [drm] Encoders: [ 9.664523] [drm] DFP2: INTERNAL_UNIPHY2 [ 9.664523] [drm] Connector 2: [ 9.664524] [drm] DVI-D-1 [ 9.664524] [drm] HPD1 [ 9.664525] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 9.664525] [drm] Encoders: [ 9.664526] [drm] DFP3: INTERNAL_UNIPHY1 [ 9.664526] [drm] Connector 3: [ 9.664526] [drm] DVI-I-1 [ 9.664527] [drm] HPD3 [ 9.664528] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c [ 9.664528] [drm] Encoders: [ 9.664529] [drm] DFP4: INTERNAL_UNIPHY [ 9.664529] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.731458] [drm] fb mappable at 0xD05D8000 [ 9.731460] [drm] vram apper at 0xD0000000 [ 9.731460] [drm] size 8294400 [ 9.731461] [drm] fb depth is 24 [ 9.731461] [drm] pitch is 7680 [ 9.731519] fbcon: radeondrmfb (fb0) is primary device [ 9.764030] Console: switching to colour frame buffer device 240x67 [ 9.770294] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 9.788071] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 10.180245] [drm] amdgpu kernel modesetting enabled. [ 11.232442] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.285419] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168d-2.fw [ 11.372058] r8169 0000:02:00.0 eth0: link down [ 11.372063] r8169 0000:02:00.0 eth0: link down [ 11.372122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.725370] r8169 0000:02:00.0 eth0: link up [ 13.725379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.965359] random: crng init done [ 17.965362] random: 7 urandom warning(s) missed due to ratelimiting [ 21.060029] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 26.604035] usb 1-5.1: reset high-speed USB device number 4 using ehci-pci [ 27.175936] pulseaudio[724]: segfault at 78 ip 00007ff4064de5d6 sp 00007ffc49ba6218 error 4 in libasound.so.2.0.0[7ff4064a5000+8f000] [ 27.175943] Code: 80 74 fc ff 49 c7 45 20 00 00 00 00 41 8b 4c 24 40 41 83 c6 01 44 39 f1 77 c2 e9 e5 fe ff ff 48 8b 87 90 01 00 00 5b 5d 41 5c <48> 8b 40 58 41 5d 41 5e ff e0 4c 8b 0d f9 89 09 00 8b 08 31 c0 4c [ 28.137424] pulseaudio[808]: segfault at 0 ip 0000000000000000 sp 00007ffdf214bb88 error 14 in pulseaudio[562a4707e000+5000] [ 28.137430] Code: Bad RIP value. [ 29.628728] traps: pulseaudio[820] general protection ip:7f82e9f413b0 sp:7ffcd4631990 error:0 in libasound.so.2.0.0[7f82e9f1c000+8f000] [ 30.388383] pulseaudio[829]: segfault at a9 ip 00007f6492a063b0 sp 00007ffc4f356a10 error 4 in libasound.so.2.0.0[7f64929e1000+8f000] [ 30.388389] Code: 48 85 ff 74 7a 8b b7 cc 01 00 00 48 89 fb 85 f6 74 0a 8b 8f c8 01 00 00 85 c9 75 36 48 8b 83 98 01 00 00 48 8b bb a8 01 00 00 50 38 8b 93 cc 01 00 00 89 c5 85 d2 74 0a 8b 83 c8 01 00 00 85 [ 32.744059] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 64.475285] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 234.785835] PM: suspend entry (deep) [ 234.785837] PM: Syncing filesystems ... done. [ 235.045247] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 235.046637] OOM killer disabled. [ 235.046638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 235.047773] Suspending console(s) (use no_console_suspend to debug) [ 235.051853] parport_pc 00:05: disabled [ 235.051922] serial 00:04: disabled [ 235.075930] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 235.075977] sd 0:0:1:0: [sda] Synchronizing SCSI cache [ 235.076058] sd 1:0:0:0: [sdb] Stopping disk [ 235.076112] sd 0:0:1:0: [sda] Stopping disk [ 236.304290] ACPI: Preparing to enter system sleep state S3 [ 236.304515] PM: Saving platform NVS memory [ 236.304528] Disabling non-boot CPUs ... [ 236.320208] IRQ 17: no longer affine to CPU1 [ 236.320222] IRQ 26: no longer affine to CPU1 [ 236.321230] smpboot: CPU 1 is now offline [ 236.348193] IRQ 18: no longer affine to CPU2 [ 236.348204] IRQ 22: no longer affine to CPU2 [ 236.349215] smpboot: CPU 2 is now offline [ 236.368181] IRQ 19: no longer affine to CPU3 [ 236.368235] IRQ 24: no longer affine to CPU3 [ 236.369243] smpboot: CPU 3 is now offline [ 236.371741] ACPI: Low-level resume complete [ 236.371774] PM: Restoring platform NVS memory [ 236.371831] PCI-DMA: Resuming GART IOMMU [ 236.371832] PCI-DMA: Restoring GART aperture settings [ 236.371838] LVT offset 1 assigned for vector 0x400 [ 236.371849] LVT offset 1 assigned [ 236.372205] Enabling non-boot CPUs ... [ 236.372248] x86: Booting SMP configuration: [ 236.372249] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 236.374700] cache: parent cpu1 should not be sleeping [ 236.374805] microcode: CPU1: patch_level=0x01000095 [ 236.374904] CPU1 is up [ 236.374921] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 236.377362] cache: parent cpu2 should not be sleeping [ 236.377474] microcode: CPU2: patch_level=0x01000095 [ 236.377593] CPU2 is up [ 236.377608] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 236.380048] cache: parent cpu3 should not be sleeping [ 236.380156] microcode: CPU3: patch_level=0x01000095 [ 236.380291] CPU3 is up [ 236.382331] ACPI: Waking up from system sleep state S3 [ 236.382636] ahci 0000:00:11.0: set SATA to AHCI mode [ 236.426454] serial 00:04: activated [ 236.426818] parport_pc 00:05: activated [ 236.437182] [drm] probing gen 2 caps for device 1002:5978 = 300d02/0 [ 236.437185] [drm] PCIE gen 2 link speeds already enabled [ 236.443600] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000). [ 236.443726] radeon 0000:01:00.0: WB enabled [ 236.443730] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0x000000007a6cb660 [ 236.443731] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0x00000000166192e1 [ 236.443733] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0x00000000eed16ad2 [ 236.443734] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0x000000002f392097 [ 236.443736] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0x000000005c859d57 [ 236.443998] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x0000000051e4eb3f [ 236.446294] sd 0:0:1:0: [sda] Starting disk [ 236.446339] sd 1:0:0:0: [sdb] Starting disk [ 236.463992] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0x0000000087194987 [ 236.463994] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0x0000000023aaddb8 [ 236.631391] [drm] ring test on 0 succeeded in 1 usecs [ 236.631395] [drm] ring test on 1 succeeded in 1 usecs [ 236.631399] [drm] ring test on 2 succeeded in 1 usecs [ 236.631406] [drm] ring test on 3 succeeded in 3 usecs [ 236.631411] [drm] ring test on 4 succeeded in 3 usecs [ 236.631562] r8169 0000:02:00.0 eth0: link down [ 236.671212] ata1.01: NODEV after polling detection [ 236.671214] ata1.01: revalidation failed (errno=-2) [ 236.742013] ata6: SATA link down (SStatus 0 SControl 300) [ 236.742087] ata4: SATA link down (SStatus 0 SControl 300) [ 236.742115] ata5: SATA link down (SStatus 0 SControl 300) [ 236.817122] [drm] ring test on 5 succeeded in 2 usecs [ 236.817126] [drm] UVD initialized successfully. [ 236.926324] [drm] ring test on 6 succeeded in 14 usecs [ 236.926340] [drm] ring test on 7 succeeded in 6 usecs [ 236.926340] [drm] VCE initialized successfully. [ 236.926391] [drm] ib test on ring 0 succeeded in 0 usecs [ 236.926435] [drm] ib test on ring 1 succeeded in 0 usecs [ 236.926477] [drm] ib test on ring 2 succeeded in 0 usecs [ 236.926519] [drm] ib test on ring 3 succeeded in 0 usecs [ 236.926561] [drm] ib test on ring 4 succeeded in 0 usecs [ 237.597164] [drm] ib test on ring 5 succeeded [ 238.109158] [drm] ib test on ring 6 succeeded [ 238.621153] [drm] ib test on ring 7 succeeded [ 238.871634] r8169 0000:02:00.0 eth0: link up [ 239.125135] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 239.157420] ata3.00: configured for UDMA/100 [ 239.581120] floppy driver state [ 239.581120] ------------------- [ 239.581127] now=4294952192 last interrupt=4294892747 diff=59445 last called handler=reset_interrupt [floppy] [ 239.581128] timeout_message=lock fdc [ 239.581128] last output bytes: [ 239.581129] 8 80 4294892742 [ 239.581130] 8 80 4294892742 [ 239.581130] 8 80 4294892742 [ 239.581131] 8 80 4294892746 [ 239.581132] 8 80 4294892746 [ 239.581132] 8 80 4294892746 [ 239.581133] 8 80 4294892746 [ 239.581133] e 80 4294892746 [ 239.581134] 13 80 4294892746 [ 239.581134] 0 90 4294892746 [ 239.581135] 1a 90 4294892746 [ 239.581135] 0 90 4294892746 [ 239.581136] 12 90 4294892746 [ 239.581136] 0 90 4294892746 [ 239.581137] 14 90 4294892746 [ 239.581138] 18 80 4294892747 [ 239.581138] 8 80 4294892747 [ 239.581139] 8 80 4294892747 [ 239.581139] 8 80 4294892747 [ 239.581140] 8 80 4294892747 [ 239.581140] last result at 4294892747 [ 239.581141] last redo_fd_request at 4294892747 [ 239.581148] status=0 [ 239.581149] fdc_busy=1 [ 239.581151] do_floppy=reset_interrupt [floppy] [ 239.581152] cont=0000000022ee52b3 [ 239.581153] current_req= (null) [ 239.581153] command_status=-1 [ 239.581156] floppy0: floppy timeout called [ 239.581516] OOM killer enabled. [ 239.581517] Restarting tasks ... done. [ 239.582686] PM: suspend exit [ 239.593144] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 239.909523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 239.997143] r8169 0000:02:00.0 eth0: link down [ 239.997148] r8169 0000:02:00.0 eth0: link down [ 239.997199] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 241.807337] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 241.807341] ata1.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 242.833929] r8169 0000:02:00.0 eth0: link up [ 242.833940] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 255.055207] usb 1-5.3: USB disconnect, device number 5 [ 2589.500867] usb 1-5.3: new full-speed USB device number 6 using ehci-pci [ 2589.833817] usb 1-5.3: New USB device found, idVendor=047f, idProduct=c012, bcdDevice= 2.43 [ 2589.833820] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2589.833822] usb 1-5.3: Product: Plantronics .Audio 628 USB [ 2589.833823] usb 1-5.3: Manufacturer: Plantronics [ 2589.972254] input: Plantronics Plantronics .Audio 628 USB as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.3/0003:047F:C012.0004/input/input20 [ 2590.029070] plantronics 0003:047F:C012.0004: input,hiddev0,hidraw2: USB HID v1.00 Device [Plantronics Plantronics .Audio 628 USB] on usb-0000:00:12.2-5.3/input3 [ 2591.489391] pulseaudio[1836]: segfault at 7ff05b220868 ip 00007ff05b220868 sp 00007ffece016ba8 error 15 [ 2591.489395] Code: 00 00 00 00 00 00 00 00 00 00 80 2d 19 00 00 00 00 00 80 02 00 00 00 00 00 00 0d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <80> 08 22 5b f0 7f 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 [ 2899.217333] pulseaudio[4854]: segfault at 362e6f732ebd ip 00007f305333d5d6 sp 00007ffd7b0c8598 error 4 in libasound.so.2.0.0[7f3053304000+8f000] [ 2899.217341] Code: 80 74 fc ff 49 c7 45 20 00 00 00 00 41 8b 4c 24 40 41 83 c6 01 44 39 f1 77 c2 e9 e5 fe ff ff 48 8b 87 90 01 00 00 5b 5d 41 5c <48> 8b 40 58 41 5d 41 5e ff e0 4c 8b 0d f9 89 09 00 8b 08 31 c0 4c [ 3025.435390] pulseaudio[4883]: segfault at 5572eeb66d40 ip 00005572eeb66d40 sp 00007ffd552a8b68 error 15 [ 3025.435394] Code: 00 00 20 00 00 00 00 00 00 00 44 69 67 69 74 61 6c 20 4f 75 74 70 75 74 20 28 53 2f 50 44 49 46 29 00 31 00 00 00 00 00 00 00 <2f> 6c 69 62 2f 78 38 36 5f 36 34 2d 6c 69 6e 75 78 2d 67 6e 75 00 [ 3086.048890] usb 1-5.3: USB disconnect, device number 6