[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back [ 0.000000] 2 base 009D000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 009E000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7F80000000 write-back [ 0.000000] 7 base 025F600000 mask 7FFFE00000 uncachable [ 0.000000] 8 base 025F800000 mask 7FFF800000 uncachable [ 0.000000] 9 base 0260000000 mask 7FE0000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE [ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE [ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff] [ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M [ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff] [ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x23fffffff] page 1G [ 0.000000] [mem 0x240000000-0x25bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x76a0ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x769fffff] page 2M [ 0.000000] [mem 0x76a00000-0x76a0ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x77e10000-0x9cabefff] [ 0.000000] [mem 0x77e10000-0x77ffffff] page 4k [ 0.000000] [mem 0x78000000-0x9c9fffff] page 2M [ 0.000000] [mem 0x9ca00000-0x9cabefff] page 4k [ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE [ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff] [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35c3e000-0x36e16fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 LENOVO CB-01 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000009CFF8000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x000000009CFEA000 00ABAB (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FACS 0x000000009CFBA000 000040 [ 0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x000000009CFFB000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 0x000000009CFF7000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 0x000000009CFF6000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x000000009CFF5000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFE7000 002028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 0x000000009CFE5000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x000000009CFE4000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: ASPT 0x000000009CFE2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DBGP 0x000000009CFE1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFE0000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFDF000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFDB000 00348C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x000000009CFD5000 003E4B (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: DMAR 0x000000009CFD9000 0000B8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25f5f8000-0x25f5fbfff] [ 0.000000] [ffffea0000000000-ffffea00085fffff] PMD -> [ffff880256c00000-ffff88025ddfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x76a0ffff] [ 0.000000] node 0: [mem 0x77e10000-0x9cabefff] [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff] [ 0.000000] node 0: [mem 0x100000000-0x25f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x25f5fffff] [ 0.000000] On node 0 totalpages: 2075740 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8648 pages used for memmap [ 0.000000] DMA32 zone: 632512 pages, LIFO batch:31 [ 0.000000] Normal zone: 19677 pages used for memmap [ 0.000000] Normal zone: 1439232 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76a10000-0x77e0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cabf000-0x9cebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s81856 r8192 d28736 u262144 [ 0.000000] pcpu-alloc: s81856 r8192 d28736 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2047338 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-kali3-amd64 root=UUID=14d01405-1cf3-4a75-9a9e-d0b9acbe88f2 ro initrd=/install/initrd.gz quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8089304K/8302960K available (5502K kernel code, 966K rwdata, 1860K rodata, 1228K init, 852K bss, 213656K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 0 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.509 MHz processor [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.01 BogoMIPS (lpj=9578036) [ 0.000030] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20140926 [ 0.012089] ACPI: All ACPI Tables successfully acquired [ 0.013926] Security Framework initialized [ 0.013933] AppArmor: AppArmor disabled by boot time parameter [ 0.013934] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.014416] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015721] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016285] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016294] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016492] Initializing cgroup subsys memory [ 0.016497] Initializing cgroup subsys devices [ 0.016499] Initializing cgroup subsys freezer [ 0.016501] Initializing cgroup subsys net_cls [ 0.016503] Initializing cgroup subsys blkio [ 0.016505] Initializing cgroup subsys perf_event [ 0.016507] Initializing cgroup subsys net_prio [ 0.016530] CPU: Physical Processor ID: 0 [ 0.016531] CPU: Processor Core ID: 0 [ 0.016535] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.016535] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.017512] mce: CPU supports 9 MCE banks [ 0.017527] CPU0: Thermal monitoring enabled (TM1) [ 0.017539] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.017539] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.017632] Freeing SMP alternatives memory: 20K (ffffffff81a26000 - ffffffff81a2b000) [ 0.018465] ftrace: allocating 22047 entries in 87 pages [ 0.026578] dmar: Host address width 39 [ 0.026580] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.026585] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.026586] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.026590] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.026591] dmar: RMRR base: 0x0000009cdf0000 end: 0x0000009ce0ffff [ 0.026592] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff [ 0.026659] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.026660] HPET id 0 under DRHD base 0xfed91000 [ 0.026660] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.026813] Enabled IRQ remapping in x2apic mode [ 0.026814] Enabling x2apic [ 0.026815] Enabled x2apic [ 0.026820] Switched APIC routing to cluster x2apic. [ 0.027245] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066962] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03) [ 0.066968] TSC deadline timer enabled [ 0.066989] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.067008] ... version: 3 [ 0.067009] ... bit width: 48 [ 0.067009] ... generic registers: 4 [ 0.067010] ... value mask: 0000ffffffffffff [ 0.067011] ... max period: 0000ffffffffffff [ 0.067012] ... fixed-purpose events: 3 [ 0.067013] ... event mask: 000000070000000f [ 0.068327] x86: Booting SMP configuration: [ 0.068328] .... node #0, CPUs: #1 [ 0.082340] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.082424] #2 #3 #4 #5 #6 #7 [ 0.166471] x86: Booted up 1 node, 8 CPUs [ 0.166474] smpboot: Total of 8 processors activated (38312.14 BogoMIPS) [ 0.173655] devtmpfs: initialized [ 0.176112] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.176898] pinctrl core: initialized pinctrl subsystem [ 0.177015] NET: Registered protocol family 16 [ 0.185495] cpuidle: using governor ladder [ 0.197506] cpuidle: using governor menu [ 0.197564] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.197565] ACPI: bus type PCI registered [ 0.197566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.197654] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.197656] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.197926] PCI: Using configuration type 1 for base access [ 0.209915] ACPI: Added _OSI(Module Device) [ 0.209917] ACPI: Added _OSI(Processor Device) [ 0.209918] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.209919] ACPI: Added _OSI(Processor Aggregator Device) [ 0.253690] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.254847] ACPI: Dynamic OEM Table Load: [ 0.254855] ACPI: SSDT 0xFFFF880255C78800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.265838] ACPI: Dynamic OEM Table Load: [ 0.265846] ACPI: SSDT 0xFFFF880256212000 0005AA (v01 PmRef ApIst 00003000 INTL 20121220) [ 0.277707] ACPI: Dynamic OEM Table Load: [ 0.277716] ACPI: SSDT 0xFFFF8802562D7C00 000119 (v01 PmRef ApCst 00003000 INTL 20121220) [ 0.308578] ACPI: Interpreter enabled [ 0.308585] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580) [ 0.308590] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580) [ 0.308605] ACPI: (supports S0 S3 S4 S5) [ 0.308607] ACPI: Using IOAPIC for interrupt routing [ 0.308631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.408337] ACPI: Power Resource [PG00] (on) [ 0.408362] ACPI: Power Resource [NVP2] (on) [ 0.411264] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.411269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.411395] \_SB_.PCI0:_OSC invalid UUID [ 0.411396] _OSC request data:1 1f 0 [ 0.411399] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.412059] PCI host bridge to bus 0000:00 [ 0.412061] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.412063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.412064] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.412066] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.412067] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.412074] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 [ 0.412204] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 [ 0.412238] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.412329] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.412369] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 [ 0.412379] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit] [ 0.412385] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.412389] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.412513] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.412520] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit] [ 0.412669] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.412687] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit] [ 0.412748] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.412831] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.412869] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.412888] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit] [ 0.412950] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.413075] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.413095] pci 0000:00:1a.0: reg 0x10: [mem 0xd171d000-0xd171d3ff] [ 0.413181] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.413280] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.413320] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.413335] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit] [ 0.413404] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.413489] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.413525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.413592] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.413678] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.413714] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.413781] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.413872] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.413908] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.413976] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.414094] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.414161] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.414247] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.414291] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.414312] pci 0000:00:1d.0: reg 0x10: [mem 0xd171c000-0xd171c3ff] [ 0.414399] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.414498] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.414538] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 [ 0.414751] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 [ 0.414768] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.414775] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.414783] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.414790] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.414797] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.414805] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff] [ 0.414844] pci 0000:00:1f.2: PME# supported from D3hot [ 0.414955] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.414970] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit] [ 0.414990] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.415168] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200 [ 0.415186] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff] [ 0.415203] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.415220] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref] [ 0.415231] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] [ 0.415243] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.415328] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.415370] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.415372] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.415374] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.415377] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.415432] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.415542] pci 0000:08:00.0: [8086:08b2] type 00 class 0x028000 [ 0.415596] pci 0000:08:00.0: reg 0x10: [mem 0xd1600000-0xd1601fff 64bit] [ 0.415838] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.415892] pci 0000:08:00.0: System wakeup disabled by ACPI [ 0.421873] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.421878] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff] [ 0.421956] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000 [ 0.421975] pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.422004] pci 0000:09:00.0: reg 0x18: [mem 0xd1504000-0xd1504fff 64bit] [ 0.422021] pci 0000:09:00.0: reg 0x20: [mem 0xd1500000-0xd1503fff 64bit] [ 0.422119] pci 0000:09:00.0: supports D1 D2 [ 0.422120] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.422174] pci 0000:09:00.0: System wakeup disabled by ACPI [ 0.429867] pci 0000:00:1c.2: PCI bridge to [bus 09] [ 0.429871] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.429875] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff] [ 0.429998] pci 0000:0a:00.0: [10ec:5249] type 00 class 0xff0000 [ 0.430033] pci 0000:0a:00.0: reg 0x10: [mem 0xd1400000-0xd1400fff] [ 0.430329] pci 0000:0a:00.0: supports D1 D2 [ 0.430330] pci 0000:0a:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.430386] pci 0000:0a:00.0: System wakeup disabled by ACPI [ 0.437901] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 0.437906] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd14fffff] [ 0.486293] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.486336] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.486377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.486418] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.486458] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.486498] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.486538] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.486578] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.486681] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.486713] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.486798] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.486800] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.486802] vgaarb: loaded [ 0.486803] vgaarb: bridge control possible 0000:00:02.0 [ 0.486877] PCI: Using ACPI for IRQ routing [ 0.492624] PCI: pci_cache_line_size set to 64 bytes [ 0.492700] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.492701] e820: reserve RAM buffer [mem 0x76a10000-0x77ffffff] [ 0.492703] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff] [ 0.492704] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.492705] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] [ 0.492815] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.492819] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.494847] Switched to clocksource hpet [ 0.499231] pnp: PnP ACPI init [ 0.499320] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.499322] system 00:00: [io 0xffff] has been reserved [ 0.499324] system 00:00: [io 0xffff] has been reserved [ 0.499325] system 00:00: [io 0xffff] has been reserved [ 0.499327] system 00:00: [io 0x1800-0x18fe] could not be reserved [ 0.499328] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 0.499330] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.499332] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499374] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.499376] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499401] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.499442] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.499444] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.499489] pnp 00:04: Plug and Play ACPI device, IDs SYN2b34 SYN2b00 SYN0002 PNP0f13 (active) [ 0.499542] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.547041] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.547043] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.547044] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.547046] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.547047] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.547049] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.547051] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.547052] system 00:06: [mem 0xff000000-0xff000fff] has been reserved [ 0.547054] system 00:06: [mem 0xff010000-0xffffffff] could not be reserved [ 0.547055] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.547057] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved [ 0.547058] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved [ 0.547060] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.547416] pnp: PnP ACPI: found 7 devices [ 0.553643] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.553657] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.553660] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 [ 0.553661] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 [ 0.553683] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.553684] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.553686] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.553689] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff] [ 0.553693] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.553695] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.553698] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref] [ 0.553699] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.553701] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.553704] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff] [ 0.553706] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.553709] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.553711] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.553716] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff] [ 0.553719] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.553725] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.553729] pci 0000:00:1c.1: bridge window [mem 0xd1600000-0xd16fffff] [ 0.553736] pci 0000:00:1c.2: PCI bridge to [bus 09] [ 0.553739] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.553743] pci 0000:00:1c.2: bridge window [mem 0xd1500000-0xd15fffff] [ 0.553751] pci 0000:00:1c.4: PCI bridge to [bus 0a] [ 0.553755] pci 0000:00:1c.4: bridge window [mem 0xd1400000-0xd14fffff] [ 0.553763] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.553764] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.553766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.553767] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.553768] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.553769] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff] [ 0.553771] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.553772] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] [ 0.553773] pci_bus 0000:07: resource 1 [mem 0x9fb00000-0x9fcfffff] [ 0.553775] pci_bus 0000:07: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref] [ 0.553776] pci_bus 0000:08: resource 1 [mem 0xd1600000-0xd16fffff] [ 0.553778] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 0.553779] pci_bus 0000:09: resource 1 [mem 0xd1500000-0xd15fffff] [ 0.553780] pci_bus 0000:0a: resource 1 [mem 0xd1400000-0xd14fffff] [ 0.553840] NET: Registered protocol family 2 [ 0.554015] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.554130] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.554247] TCP: Hash tables configured (established 65536 bind 65536) [ 0.554260] TCP: reno registered [ 0.554270] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.554294] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.554361] NET: Registered protocol family 1 [ 0.554375] pci 0000:00:02.0: Video device with shadowed ROM [ 2.156210] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.757501] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.757712] PCI: CLS 64 bytes, default 64 [ 3.757746] Unpacking initramfs... [ 4.040452] Freeing initrd memory: 18276K (ffff880035c3e000 - ffff880036e17000) [ 4.040476] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.040478] software IO TLB [mem 0x98abf000-0x9cabf000] (64MB) mapped at [ffff880098abf000-ffff88009cabefff] [ 4.040521] Simple Boot Flag at 0x44 set to 0x1 [ 4.040778] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 4.040831] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040838] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040846] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040853] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040861] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040868] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040875] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040883] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1a [ 4.040934] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 4.041236] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 4.041282] audit: initializing netlink subsys (disabled) [ 4.041298] audit: type=2000 audit(1427459388.028:1): initialized [ 4.041571] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.041589] zpool: loaded [ 4.041741] VFS: Disk quotas dquot_6.5.2 [ 4.041764] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.041816] msgmni has been set to 15835 [ 4.042155] alg: No test for stdrng (krng) [ 4.042181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.042226] io scheduler noop registered [ 4.042228] io scheduler deadline registered [ 4.042232] io scheduler cfq registered (default) [ 4.042393] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X [ 4.042826] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.042840] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 4.042881] intel_idle: MWAIT substates: 0x42120 [ 4.042882] intel_idle: v0.4 model 0x3C [ 4.042883] intel_idle: lapic_timer_reliable_states 0xffffffff [ 4.043205] GHES: HEST is not enabled! [ 4.043265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.043648] Linux agpgart interface v0.103 [ 4.043762] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 4.068043] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.068047] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.068152] mousedev: PS/2 mouse device common for all mice [ 4.068191] rtc_cmos 00:02: RTC can wake from S4 [ 4.068304] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.068329] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 4.068339] Intel P-state driver initializing. [ 4.068546] ledtrig-cpu: registered to indicate activity on CPUs [ 4.069404] AMD IOMMUv2 driver by Joerg Roedel [ 4.069406] AMD IOMMUv2 functionality not available on this system [ 4.069624] TCP: cubic registered [ 4.069780] NET: Registered protocol family 10 [ 4.070334] mip6: Mobile IPv6 [ 4.070344] NET: Registered protocol family 17 [ 4.070361] mpls_gso: MPLS GSO support [ 4.071697] registered taskstats version 1 [ 4.073481] rtc_cmos 00:02: setting system clock to 2015-03-27 12:29:48 UTC (1427459388) [ 4.073688] PM: Hibernation image not present or could not be loaded. [ 4.075577] Freeing unused kernel memory: 1228K (ffffffff818f3000 - ffffffff81a26000) [ 4.075580] Write protecting the kernel read-only data: 8192k [ 4.079218] Freeing unused kernel memory: 632K (ffff880001562000 - ffff880001600000) [ 4.080217] Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000) [ 4.081986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.121654] udevd[101]: starting version 175 [ 4.130613] rtsx_pci 0000:0a:00.0: irq 27 for MSI/MSI-X [ 4.130647] rtsx_pci 0000:0a:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27 [ 4.130847] ACPI: bus type USB registered [ 4.130870] usbcore: registered new interface driver usbfs [ 4.130879] usbcore: registered new interface driver hub [ 4.130906] usbcore: registered new device driver usb [ 4.131298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.131441] ehci-pci: EHCI PCI platform driver [ 4.131611] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.131619] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.131632] ehci-pci 0000:00:1a.0: debug port 2 [ 4.131983] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.131987] ACPI: Thermal Zone [TZ00] (57 C) [ 4.133279] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.133288] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.135547] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.135567] ehci-pci 0000:00:1a.0: irq 21, io mem 0xd171d000 [ 4.138340] r8169 0000:09:00.0: irq 28 for MSI/MSI-X [ 4.138812] r8169 0000:09:00.0 eth0: RTL8168g/8111g at 0xffffc90010ca6000, f0:76:1c:22:89:b6, XID 10900800 IRQ 28 [ 4.138814] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.145853] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.145888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.145890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.145891] usb usb1: Product: EHCI Host Controller [ 4.145892] usb usb1: Manufacturer: Linux 3.18.0-kali3-amd64 ehci_hcd [ 4.145893] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.146009] hub 1-0:1.0: USB hub found [ 4.146013] hub 1-0:1.0: 2 ports detected [ 4.146228] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.146232] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.146243] ehci-pci 0000:00:1d.0: debug port 2 [ 4.150141] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.150162] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd171c000 [ 4.161824] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.161862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.161864] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.161865] usb usb2: Product: EHCI Host Controller [ 4.161867] usb usb2: Manufacturer: Linux 3.18.0-kali3-amd64 ehci_hcd [ 4.161869] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.162054] hub 2-0:1.0: USB hub found [ 4.162059] hub 2-0:1.0: 2 ports detected [ 4.162295] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.162301] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.162392] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.162409] xhci_hcd 0000:00:14.0: irq 29 for MSI/MSI-X [ 4.162457] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.162458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.162460] usb usb3: Product: xHCI Host Controller [ 4.162461] usb usb3: Manufacturer: Linux 3.18.0-kali3-amd64 xhci-hcd [ 4.162462] usb usb3: SerialNumber: 0000:00:14.0 [ 4.162571] hub 3-0:1.0: USB hub found [ 4.162587] hub 3-0:1.0: 14 ports detected [ 4.165068] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.165070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 4.165097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.165098] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.165099] usb usb4: Product: xHCI Host Controller [ 4.165100] usb usb4: Manufacturer: Linux 3.18.0-kali3-amd64 xhci-hcd [ 4.165101] usb usb4: SerialNumber: 0000:00:14.0 [ 4.165175] hub 4-0:1.0: USB hub found [ 4.165184] hub 4-0:1.0: 4 ports detected [ 4.225936] SCSI subsystem initialized [ 4.230387] libata version 3.00 loaded. [ 4.231592] ahci 0000:00:1f.2: version 3.0 [ 4.231757] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 4.231781] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.231802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x10 impl SATA mode [ 4.231805] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 4.233233] scsi host0: ahci [ 4.234405] scsi host1: ahci [ 4.234518] scsi host2: ahci [ 4.234615] scsi host3: ahci [ 4.234703] scsi host4: ahci [ 4.234760] ata1: DUMMY [ 4.234762] ata2: DUMMY [ 4.234763] ata3: DUMMY [ 4.234765] ata4: DUMMY [ 4.234768] ata5: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b300 irq 30 [ 4.236182] AVX2 version of gcm_enc/dec engaged. [ 4.236185] AES CTR mode by8 optimization enabled [ 4.238545] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 4.241000] alg: No test for crc32 (crc32-pclmul) [ 4.458123] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.474134] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.474135] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 4.554195] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.555037] ata5.00: ATA-9: WDC WD10S21X-24R1BT0-SSHD-8GB, 03.01A01, max UDMA/133 [ 4.555041] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.555950] ata5.00: configured for UDMA/133 [ 4.556157] scsi 4:0:0:0: Direct-Access ATA WDC WD10S21X-24R 1A01 PQ: 0 ANSI: 5 [ 4.559175] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.559178] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 4.559325] sd 4:0:0:0: [sda] Write Protect is off [ 4.559328] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.559396] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.590678] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 4.590682] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.591051] hub 1-1:1.0: USB hub found [ 4.591125] hub 1-1:1.0: 6 ports detected [ 4.606694] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 4.606697] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.607053] hub 2-1:1.0: USB hub found [ 4.607182] hub 2-1:1.0: 8 ports detected [ 4.608689] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 4.608692] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.608695] usb 3-1: Product: RTL8187_Wireless [ 4.608697] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 4.608699] usb 3-1: SerialNumber: 00C0CA751352 [ 4.774366] usb 3-6: new high-speed USB device number 3 using xhci_hcd [ 4.947505] usb 3-6: New USB device found, idVendor=5986, idProduct=055e [ 4.947509] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.947510] usb 3-6: Product: Lenovo EasyCamera [ 4.947512] usb 3-6: Manufacturer: Generic [ 4.947513] usb 3-6: SerialNumber: 200901010001 [ 5.038579] tsc: Refined TSC clocksource calibration: 2394.455 MHz [ 5.114652] usb 3-7: new full-speed USB device number 4 using xhci_hcd [ 5.244064] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc [ 5.244068] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.289868] sda: sda1 sda2 [ 5.290734] sd 4:0:0:0: [sda] Attached SCSI disk [ 5.292253] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 5.558067] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.558101] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1a [ 5.560173] microcode: CPU0 updated to revision 0x1c, date = 2014-07-03 [ 5.560198] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.560237] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1a [ 5.561382] microcode: CPU1 updated to revision 0x1c, date = 2014-07-03 [ 5.561391] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.561400] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1a [ 5.562332] microcode: CPU2 updated to revision 0x1c, date = 2014-07-03 [ 5.562343] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.562356] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1a [ 5.563339] microcode: CPU3 updated to revision 0x1c, date = 2014-07-03 [ 5.563352] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.563381] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1a [ 5.564205] microcode: CPU4 updated to revision 0x1c, date = 2014-07-03 [ 5.564212] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.564258] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1a [ 5.565082] microcode: CPU5 updated to revision 0x1c, date = 2014-07-03 [ 5.565089] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.565118] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1a [ 5.565954] microcode: CPU6 updated to revision 0x1c, date = 2014-07-03 [ 5.565961] platform microcode: firmware: direct-loading firmware intel-ucode/06-3c-03 [ 5.565976] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1a [ 5.566803] microcode: CPU7 updated to revision 0x1c, date = 2014-07-03 [ 5.571170] device-mapper: uevent: version 1.0.3 [ 5.571237] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com [ 5.577737] PM: Starting manual resume from disk [ 5.577741] PM: Hibernation image partition 8:2 present [ 5.577742] PM: Looking for hibernation image. [ 5.611260] PM: Image not found (code -22) [ 5.611263] PM: Hibernation image not present or could not be loaded. [ 5.618591] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 5.618594] EXT4-fs (sda1): write access will be enabled during recovery [ 6.039532] Switched to clocksource tsc [ 6.060075] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.297823] EXT4-fs (sda1): 35 orphan inodes deleted [ 6.297826] EXT4-fs (sda1): recovery complete [ 6.385934] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.850392] random: nonblocking pool is initialized [ 8.271074] udevd[512]: starting version 175 [ 8.651776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2 [ 8.651781] ACPI: Power Button [PWRB] [ 8.651818] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3 [ 8.651820] ACPI: Sleep Button [SLPB] [ 8.651870] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 8.651901] ACPI: Lid Switch [LID0] [ 8.651935] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.651937] ACPI: Power Button [PWRF] [ 8.730444] wmi: Mapper loaded [ 8.841810] ACPI: Battery Slot [BAT1] (battery present) [ 8.842104] ACPI: AC Adapter [ACAD] (on-line) [ 9.180199] cfg80211: Calling CRDA to update world regulatory domain [ 9.180951] EDAC MC: Ver: 3.0.0 [ 9.223373] iTCO_vendor_support: vendor-support=0 [ 9.329059] intel_rapl: Found RAPL domain package [ 9.329063] intel_rapl: Found RAPL domain core [ 9.329066] intel_rapl: Found RAPL domain uncore [ 9.329068] intel_rapl: Found RAPL domain dram [ 9.334698] ACPI Warning: SystemIO range 0x0000000000005040-0x000000000000505f conflicts with OpRegion 0x0000000000005040-0x000000000000504f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258) [ 9.334703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.348720] EDAC ie31200: No ECC support [ 9.421200] mei_me 0000:00:16.0: irq 31 for MSI/MSI-X [ 9.526575] ACPI : EC: GPE storm detected(13 GPEs), transactions will use polling mode [ 9.578880] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.578906] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 9.579028] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.596667] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x127c00, board id: 2334, fw id: 1588229 [ 9.633061] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 9.640817] Bluetooth: Core ver 2.19 [ 9.640829] NET: Registered protocol family 31 [ 9.640830] Bluetooth: HCI device and connection manager initialized [ 9.640835] Bluetooth: HCI socket layer initialized [ 9.640837] Bluetooth: L2CAP socket layer initialized [ 9.640840] Bluetooth: SCO socket layer initialized [ 9.670335] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7 [ 9.672324] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.672326] Copyright(c) 2003- 2014 Intel Corporation [ 9.672525] iwlwifi 0000:08:00.0: irq 32 for MSI/MSI-X [ 9.777495] [drm] Initialized drm 1.1.0 20060810 [ 9.792661] usbcore: registered new interface driver btusb [ 9.805332] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 9.823306] snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X [ 9.991532] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.991535] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.991536] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 9.991538] sound hdaudioC1D0: mono: mono_out=0x0 [ 9.991539] sound hdaudioC1D0: dig-out=0x1e/0x0 [ 9.991540] sound hdaudioC1D0: inputs: [ 9.991541] sound hdaudioC1D0: Mic=0x19 [ 9.991543] sound hdaudioC1D0: Internal Mic=0x12 [ 9.999421] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8 [ 9.999629] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 9.999711] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 10.080810] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 10.080815] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 10.124275] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7260-10.ucode [ 10.124389] iwlwifi 0000:08:00.0: loaded firmware version 23.11.10.0 op_mode iwlmvm [ 10.182517] iwlwifi 0000:08:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 10.182588] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 10.182858] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 10.227707] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 10.321464] media: Linux media interface: v0.10 [ 10.337544] Linux video capture interface: v2.00 [ 10.511067] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 10.553000] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:055e) [ 10.555882] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/input/input11 [ 10.555975] usbcore: registered new interface driver uvcvideo [ 10.555977] USB Video Class driver (1.1.1) [ 10.613947] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 10.614074] ieee80211 phy1: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 10.622491] rtl8187: Customer ID is 0xFF [ 10.622838] rtl8187: wireless switch is on [ 10.622861] usbcore: registered new interface driver rtl8187 [ 10.673985] [drm] Memory usable by graphics device = 2048M [ 10.673987] [drm] Replacing VGA console driver [ 10.674937] Console: switching to colour dummy device 80x25 [ 10.699164] i915 0000:00:02.0: irq 34 for MSI/MSI-X [ 10.699174] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.699175] [drm] Driver supports precise vblank timestamp query. [ 10.699213] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.771745] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 10.772032] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 10.772121] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:43/LNXVIDEO:00/input/input12 [ 10.788501] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.788614] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 10.788690] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0 [ 10.843252] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 10.860093] fbcon: inteldrmfb (fb0) is primary device [ 10.956989] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 11.067695] cfg80211: World regulatory domain updated: [ 11.067697] cfg80211: DFS Master region: unset [ 11.067697] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.067698] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.067699] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.067700] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.067701] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 11.067701] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.067702] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.067703] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.067704] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 12.020215] Console: switching to colour frame buffer device 240x67 [ 12.024530] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 12.024531] i915 0000:00:02.0: registered panic notifier [ 12.048214] snd_hda_intel 0000:00:03.0: irq 35 for MSI/MSI-X [ 12.084826] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 12.084910] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 12.084985] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 12.863871] Adding 16796668k swap on /dev/sda2. Priority:-1 extents:1 across:16796668k FS [ 12.873516] EXT4-fs (sda1): re-mounted. Opts: (null) [ 13.005347] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.482125] bbswitch: version 0.8 [ 15.482130] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 15.482135] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 15.482145] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95) [ 15.482211] bbswitch: detected an Optimus _DSM function [ 15.482224] pci 0000:01:00.0: enabling device (0006 -> 0007) [ 15.482255] ACPI Error: [AR02] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) [ 15.482260] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0._PRT] (Node ffff88025e8665e0), AE_NOT_FOUND (20140926/psparse-536) [ 15.482344] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 15.483916] bbswitch: disabling discrete graphics [ 15.483923] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95) [ 15.484136] ACPI Error: [AR02] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) [ 15.484139] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0._PRT] (Node ffff88025e8665e0), AE_NOT_FOUND (20140926/psparse-536) [ 19.154524] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 19.155870] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 19.156124] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 19.168881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.216168] r8169 0000:09:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 19.228135] r8169 0000:09:00.0 eth0: link down [ 19.228159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.427023] usb 3-1: USB disconnect, device number 2 [ 19.806516] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 19.940804] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 19.940808] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 19.940809] usb 3-1: Product: RTL8187_Wireless [ 19.940811] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 19.940812] usb 3-1: SerialNumber: 00C0CA751352 [ 20.055583] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 20.055716] ieee80211 phy2: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 20.063558] rtl8187: Customer ID is 0xFF [ 20.063867] rtl8187: wireless switch is on [ 20.071345] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 21.937013] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 26.909105] wlan0: authenticate with 00:c0:ca:74:9c:ae [ 26.912735] wlan0: send auth to 00:c0:ca:74:9c:ae (try 1/3) [ 26.915073] wlan0: authenticated [ 26.916216] wlan0: associate with 00:c0:ca:74:9c:ae (try 1/3) [ 26.920036] wlan0: RX AssocResp from 00:c0:ca:74:9c:ae (capab=0x411 status=0 aid=5) [ 26.921311] wlan0: associated [ 26.921344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.921373] cfg80211: Calling CRDA for country: EU [ 26.924051] cfg80211: Regulatory domain changed to country: EU [ 26.924054] cfg80211: DFS Master region: unset [ 26.924055] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 26.924057] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 26.924058] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 26.924060] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 26.924061] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) [ 26.924062] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 82.359408] device wlan2mon entered promiscuous mode [ 223.327366] usb 3-1: USB disconnect, device number 5 [ 223.630945] usb 3-1: new high-speed USB device number 6 using xhci_hcd [ 223.765542] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 223.765546] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 223.765548] usb 3-1: Product: RTL8187_Wireless [ 223.765549] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 223.765550] usb 3-1: SerialNumber: 00C0CA751352 [ 223.880681] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' [ 223.880825] ieee80211 phy3: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 223.888959] rtl8187: Customer ID is 0xFF [ 223.889267] rtl8187: wireless switch is on [ 223.896323] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 225.757270] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 225.931468] usb 3-1: USB disconnect, device number 6 [ 226.309106] usb 3-1: new high-speed USB device number 7 using xhci_hcd [ 226.443708] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 226.443711] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 226.443713] usb 3-1: Product: RTL8187_Wireless [ 226.443715] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 226.443716] usb 3-1: SerialNumber: 00C0CA751352 [ 226.558445] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' [ 226.558579] ieee80211 phy4: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 226.566755] rtl8187: Customer ID is 0xFF [ 226.567067] rtl8187: wireless switch is on [ 226.574420] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 228.439749] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 228.824930] usb 3-1: USB disconnect, device number 7 [ 229.235466] usb 3-1: new high-speed USB device number 8 using xhci_hcd [ 229.370064] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 229.370068] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 229.370070] usb 3-1: Product: RTL8187_Wireless [ 229.370071] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 229.370072] usb 3-1: SerialNumber: 00C0CA751352 [ 229.484877] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht' [ 229.485023] ieee80211 phy5: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 229.493062] rtl8187: Customer ID is 0xFF [ 229.493393] rtl8187: wireless switch is on [ 229.500547] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 231.381810] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 231.658435] usb 3-1: USB disconnect, device number 8 [ 232.065750] usb 3-1: new high-speed USB device number 9 using xhci_hcd [ 232.200335] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 232.200338] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 232.200340] usb 3-1: Product: RTL8187_Wireless [ 232.200341] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 232.200343] usb 3-1: SerialNumber: 00C0CA751352 [ 232.314547] ieee80211 phy6: Selected rate control algorithm 'minstrel_ht' [ 232.314685] ieee80211 phy6: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 232.322557] rtl8187: Customer ID is 0xFF [ 232.322866] rtl8187: wireless switch is on [ 232.330474] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 234.200453] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 254.890108] usb 3-1: USB disconnect, device number 9 [ 255.356544] usb 3-1: new high-speed USB device number 10 using xhci_hcd [ 255.491167] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 255.491171] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 255.491173] usb 3-1: Product: RTL8187_Wireless [ 255.491174] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 255.491176] usb 3-1: SerialNumber: 00C0CA751352 [ 255.605540] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht' [ 255.605674] ieee80211 phy7: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 255.613588] rtl8187: Customer ID is 0xFF [ 255.613903] rtl8187: wireless switch is on [ 255.622063] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 257.491338] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 257.629193] usb 3-1: USB disconnect, device number 10 [ 257.998669] usb 3-1: new high-speed USB device number 11 using xhci_hcd [ 258.133280] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 258.133284] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 258.133286] usb 3-1: Product: RTL8187_Wireless [ 258.133287] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 258.133288] usb 3-1: SerialNumber: 00C0CA751352 [ 258.247252] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht' [ 258.247395] ieee80211 phy8: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 258.255300] rtl8187: Customer ID is 0xFF [ 258.255609] rtl8187: wireless switch is on [ 258.263512] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 260.141040] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 306.439536] device wlan2mon entered promiscuous mode [ 501.998264] wlan0: deauthenticating from 00:c0:ca:74:9c:ae by local choice (Reason: 3=DEAUTH_LEAVING) [ 502.007917] cfg80211: Calling CRDA to update world regulatory domain [ 502.010444] cfg80211: World regulatory domain updated: [ 502.010446] cfg80211: DFS Master region: unset [ 502.010447] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 502.010449] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 502.010450] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 502.010451] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 502.010452] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 502.010453] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 502.010453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 502.010454] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 502.010455] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 534.256108] wlan0: authenticate with 00:c0:ca:74:9c:ae [ 534.258802] wlan0: send auth to 00:c0:ca:74:9c:ae (try 1/3) [ 534.262842] wlan0: authenticated [ 534.265506] wlan0: associate with 00:c0:ca:74:9c:ae (try 1/3) [ 534.269441] wlan0: RX AssocResp from 00:c0:ca:74:9c:ae (capab=0x411 status=0 aid=5) [ 534.271557] wlan0: associated [ 534.271659] cfg80211: Calling CRDA for country: EU [ 534.277980] cfg80211: Regulatory domain changed to country: EU [ 534.277985] cfg80211: DFS Master region: unset [ 534.277988] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 534.277992] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 534.277995] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 534.277998] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 534.278001] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) [ 534.278003] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 677.566737] usb 3-1: USB disconnect, device number 11 [ 677.873391] usb 3-1: new high-speed USB device number 12 using xhci_hcd [ 678.007956] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 678.007960] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 678.007962] usb 3-1: Product: RTL8187_Wireless [ 678.007963] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 678.007965] usb 3-1: SerialNumber: 00C0CA751352 [ 678.122735] ieee80211 phy9: Selected rate control algorithm 'minstrel_ht' [ 678.122872] ieee80211 phy9: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 678.130896] rtl8187: Customer ID is 0xFF [ 678.131203] rtl8187: wireless switch is on [ 678.138650] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 680.011877] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 680.168711] usb 3-1: USB disconnect, device number 12 [ 680.527478] usb 3-1: new high-speed USB device number 13 using xhci_hcd [ 680.662053] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 680.662057] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 680.662058] usb 3-1: Product: RTL8187_Wireless [ 680.662060] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 680.662061] usb 3-1: SerialNumber: 00C0CA751352 [ 680.777632] ieee80211 phy10: Selected rate control algorithm 'minstrel_ht' [ 680.777766] ieee80211 phy10: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 680.785568] rtl8187: Customer ID is 0xFF [ 680.785879] rtl8187: wireless switch is on [ 680.793254] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 682.654247] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 682.801674] usb 3-1: USB disconnect, device number 13 [ 683.205691] usb 3-1: new high-speed USB device number 14 using xhci_hcd [ 683.340286] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 683.340290] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 683.340291] usb 3-1: Product: RTL8187_Wireless [ 683.340293] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 683.340294] usb 3-1: SerialNumber: 00C0CA751352 [ 683.455320] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht' [ 683.455454] ieee80211 phy11: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 683.463603] rtl8187: Customer ID is 0xFF [ 683.463918] rtl8187: wireless switch is on [ 683.516431] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 685.388311] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 728.953726] device wlan2mon entered promiscuous mode [ 787.971406] usb 3-1: USB disconnect, device number 14 [ 788.286466] usb 3-1: new high-speed USB device number 15 using xhci_hcd [ 788.421052] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 788.421055] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 788.421057] usb 3-1: Product: RTL8187_Wireless [ 788.421059] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 788.421060] usb 3-1: SerialNumber: 00C0CA751352 [ 788.535784] ieee80211 phy12: Selected rate control algorithm 'minstrel_ht' [ 788.535925] ieee80211 phy12: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 788.543797] rtl8187: Customer ID is 0xFF [ 788.544102] rtl8187: wireless switch is on [ 788.552365] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 790.417133] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 790.606094] usb 3-1: USB disconnect, device number 15 [ 791.060703] usb 3-1: new high-speed USB device number 16 using xhci_hcd [ 791.195294] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 791.195297] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 791.195299] usb 3-1: Product: RTL8187_Wireless [ 791.195301] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 791.195302] usb 3-1: SerialNumber: 00C0CA751352 [ 791.311786] ieee80211 phy13: Selected rate control algorithm 'minstrel_ht' [ 791.311927] ieee80211 phy13: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 791.319836] rtl8187: Customer ID is 0xFF [ 791.320144] rtl8187: wireless switch is on [ 791.371574] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 793.247100] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 831.937033] device wlan2mon entered promiscuous mode [ 882.843716] usb 3-1: USB disconnect, device number 16 [ 883.367168] usb 3-1: new high-speed USB device number 17 using xhci_hcd [ 883.501760] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 883.501764] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 883.501766] usb 3-1: Product: RTL8187_Wireless [ 883.501768] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 883.501769] usb 3-1: SerialNumber: 00C0CA751352 [ 883.616563] ieee80211 phy14: Selected rate control algorithm 'minstrel_ht' [ 883.616702] ieee80211 phy14: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 883.624842] rtl8187: Customer ID is 0xFF [ 883.625157] rtl8187: wireless switch is on [ 883.634604] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 885.473674] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 885.630657] usb 3-1: USB disconnect, device number 17 [ 885.973225] usb 3-1: new high-speed USB device number 18 using xhci_hcd [ 886.107639] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 886.107643] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 886.107645] usb 3-1: Product: RTL8187_Wireless [ 886.107647] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 886.107648] usb 3-1: SerialNumber: 00C0CA751352 [ 886.222241] ieee80211 phy15: Selected rate control algorithm 'minstrel_ht' [ 886.222379] ieee80211 phy15: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 886.231007] rtl8187: Customer ID is 0xFF [ 886.231319] rtl8187: wireless switch is on [ 886.284039] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 888.147755] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 888.321705] usb 3-1: USB disconnect, device number 18 [ 888.699471] usb 3-1: new high-speed USB device number 19 using xhci_hcd [ 888.833787] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 888.833791] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 888.833793] usb 3-1: Product: RTL8187_Wireless [ 888.833794] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 888.833796] usb 3-1: SerialNumber: 00C0CA751352 [ 888.948287] ieee80211 phy16: Selected rate control algorithm 'minstrel_ht' [ 888.948421] ieee80211 phy16: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 888.956285] rtl8187: Customer ID is 0xFF [ 888.956597] rtl8187: wireless switch is on [ 889.010218] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 890.926263] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 891.089942] usb 3-1: USB disconnect, device number 19 [ 891.449637] usb 3-1: new high-speed USB device number 20 using xhci_hcd [ 891.584279] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 891.584283] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 891.584285] usb 3-1: Product: RTL8187_Wireless [ 891.584287] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 891.584288] usb 3-1: SerialNumber: 00C0CA751352 [ 891.698763] ieee80211 phy17: Selected rate control algorithm 'minstrel_ht' [ 891.698894] ieee80211 phy17: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 891.706781] rtl8187: Customer ID is 0xFF [ 891.707090] rtl8187: wireless switch is on [ 891.714625] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 893.572293] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 893.762362] usb 3-1: USB disconnect, device number 20 [ 894.095796] usb 3-1: new high-speed USB device number 21 using xhci_hcd [ 894.230378] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 894.230382] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 894.230384] usb 3-1: Product: RTL8187_Wireless [ 894.230386] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 894.230387] usb 3-1: SerialNumber: 00C0CA751352 [ 894.347382] ieee80211 phy18: Selected rate control algorithm 'minstrel_ht' [ 894.347518] ieee80211 phy18: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 894.355468] rtl8187: Customer ID is 0xFF [ 894.355777] rtl8187: wireless switch is on [ 894.410434] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 896.286237] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 916.875820] usb 3-1: USB disconnect, device number 21 [ 917.258468] usb 3-1: new high-speed USB device number 22 using xhci_hcd [ 917.392497] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 917.392501] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 917.392503] usb 3-1: Product: RTL8187_Wireless [ 917.392504] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 917.392506] usb 3-1: SerialNumber: 00C0CA751352 [ 917.511836] ieee80211 phy19: Selected rate control algorithm 'minstrel_ht' [ 917.512038] ieee80211 phy19: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 917.520195] rtl8187: Customer ID is 0xFF [ 917.520543] rtl8187: wireless switch is on [ 917.527602] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 919.380933] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 919.382524] cfg80211: Calling CRDA to update world regulatory domain [ 919.385045] cfg80211: World regulatory domain updated: [ 919.385048] cfg80211: DFS Master region: unset [ 919.385049] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 919.385051] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 919.385052] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 919.385053] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 919.385055] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 919.385056] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 919.385057] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 919.385058] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 919.385059] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 919.530759] usb 3-1: USB disconnect, device number 22 [ 919.868615] usb 3-1: new high-speed USB device number 23 using xhci_hcd [ 920.003139] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 920.003143] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 920.003145] usb 3-1: Product: RTL8187_Wireless [ 920.003146] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 920.003147] usb 3-1: SerialNumber: 00C0CA751352 [ 920.118365] ieee80211 phy20: Selected rate control algorithm 'minstrel_ht' [ 920.118501] ieee80211 phy20: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 920.126644] rtl8187: Customer ID is 0xFF [ 920.126958] rtl8187: wireless switch is on [ 920.135313] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 921.999078] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 922.146621] usb 3-1: USB disconnect, device number 23 [ 922.722883] usb 3-1: new high-speed USB device number 24 using xhci_hcd [ 922.857482] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 922.857486] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 922.857488] usb 3-1: Product: RTL8187_Wireless [ 922.857489] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 922.857491] usb 3-1: SerialNumber: 00C0CA751352 [ 922.974147] ieee80211 phy21: Selected rate control algorithm 'minstrel_ht' [ 922.974290] ieee80211 phy21: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 922.982175] rtl8187: Customer ID is 0xFF [ 922.982484] rtl8187: wireless switch is on [ 923.037843] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 924.905560] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 925.072329] usb 3-1: USB disconnect, device number 24 [ 925.409034] usb 3-1: new high-speed USB device number 25 using xhci_hcd [ 925.543682] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 925.543686] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 925.543688] usb 3-1: Product: RTL8187_Wireless [ 925.543689] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 925.543691] usb 3-1: SerialNumber: 00C0CA751352 [ 925.658859] ieee80211 phy22: Selected rate control algorithm 'minstrel_ht' [ 925.659012] ieee80211 phy22: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 925.666982] rtl8187: Customer ID is 0xFF [ 925.667316] rtl8187: wireless switch is on [ 925.674964] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 927.539445] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 927.711393] usb 3-1: USB disconnect, device number 25 [ 928.087252] usb 3-1: new high-speed USB device number 26 using xhci_hcd [ 928.221828] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 928.221832] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 928.221834] usb 3-1: Product: RTL8187_Wireless [ 928.221836] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 928.221837] usb 3-1: SerialNumber: 00C0CA751352 [ 928.336044] ieee80211 phy23: Selected rate control algorithm 'minstrel_ht' [ 928.336177] ieee80211 phy23: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 928.344169] rtl8187: Customer ID is 0xFF [ 928.344478] rtl8187: wireless switch is on [ 928.398066] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 930.253983] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 930.407411] usb 3-1: USB disconnect, device number 26 [ 930.797431] usb 3-1: new high-speed USB device number 27 using xhci_hcd [ 930.932030] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 930.932034] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 930.932036] usb 3-1: Product: RTL8187_Wireless [ 930.932037] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 930.932038] usb 3-1: SerialNumber: 00C0CA751352 [ 931.046764] ieee80211 phy24: Selected rate control algorithm 'minstrel_ht' [ 931.046900] ieee80211 phy24: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 931.055752] rtl8187: Customer ID is 0xFF [ 931.056090] rtl8187: wireless switch is on [ 931.109295] rtl8187 3-1:1.0 wlan2: renamed from wlan1 [ 932.947816] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 934.052201] wlan0: authenticate with 00:c0:ca:74:9c:ae [ 934.054999] wlan0: send auth to 00:c0:ca:74:9c:ae (try 1/3) [ 934.056954] wlan0: authenticated [ 934.060045] wlan0: associate with 00:c0:ca:74:9c:ae (try 1/3) [ 934.063960] wlan0: RX AssocResp from 00:c0:ca:74:9c:ae (capab=0x411 status=0 aid=5) [ 934.064658] wlan0: associated [ 934.064700] cfg80211: Calling CRDA for country: EU [ 934.067369] cfg80211: Regulatory domain changed to country: EU [ 934.067371] cfg80211: DFS Master region: unset [ 934.067371] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 934.067373] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 934.067374] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 934.067375] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 934.067376] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) [ 934.067376] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 965.884813] wlan0: deauthenticating from 00:c0:ca:74:9c:ae by local choice (Reason: 3=DEAUTH_LEAVING) [ 965.893226] cfg80211: Calling CRDA to update world regulatory domain [ 965.898701] cfg80211: World regulatory domain updated: [ 965.898708] cfg80211: DFS Master region: unset [ 965.898710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 965.898714] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 965.898718] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 965.898720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 965.898723] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 965.898726] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 965.898728] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 965.898730] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 965.898733] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 997.735171] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 997.735437] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 1005.677685] device wlan0mon entered promiscuous mode [ 1113.991319] device wlan2mon entered promiscuous mode [ 1316.832676] usb 3-1: USB disconnect, device number 27 [ 1317.201150] usb 3-1: new high-speed USB device number 28 using xhci_hcd [ 1317.335737] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1317.335741] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1317.335743] usb 3-1: Product: RTL8187_Wireless [ 1317.335744] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1317.335745] usb 3-1: SerialNumber: 00C0CA751352 [ 1317.450598] ieee80211 phy25: Selected rate control algorithm 'minstrel_ht' [ 1317.450733] ieee80211 phy25: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1317.458903] rtl8187: Customer ID is 0xFF [ 1317.459212] rtl8187: wireless switch is on [ 1317.466728] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1319.351615] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1556.199628] usb 3-1: USB disconnect, device number 28 [ 1556.538227] usb 3-1: new high-speed USB device number 29 using xhci_hcd [ 1556.672443] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1556.672447] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1556.672449] usb 3-1: Product: RTL8187_Wireless [ 1556.672450] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1556.672451] usb 3-1: SerialNumber: 00C0CA751352 [ 1556.788035] ieee80211 phy26: Selected rate control algorithm 'minstrel_ht' [ 1556.788179] ieee80211 phy26: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1556.796073] rtl8187: Customer ID is 0xFF [ 1556.796380] rtl8187: wireless switch is on [ 1556.804607] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1558.688713] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1562.155306] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1562.360816] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1562.366555] wlan2: authenticated [ 1562.367181] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1562.384200] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=1) [ 1562.385036] wlan2: associated [ 1562.385045] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1581.666691] usb 3-1: USB disconnect, device number 29 [ 1581.679937] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1581.810862] cfg80211: Calling CRDA to update world regulatory domain [ 1581.813270] cfg80211: World regulatory domain updated: [ 1581.813273] cfg80211: DFS Master region: unset [ 1581.813274] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1581.813276] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1581.813277] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1581.813278] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1581.813279] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 1581.813280] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1581.813281] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1581.813282] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1581.813283] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1582.094811] usb 3-1: new high-speed USB device number 30 using xhci_hcd [ 1582.229450] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1582.229453] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1582.229455] usb 3-1: Product: RTL8187_Wireless [ 1582.229457] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1582.229458] usb 3-1: SerialNumber: 00C0CA751352 [ 1582.344086] ieee80211 phy27: Selected rate control algorithm 'minstrel_ht' [ 1582.344222] ieee80211 phy27: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1582.352261] rtl8187: Customer ID is 0xFF [ 1582.352573] rtl8187: wireless switch is on [ 1582.359987] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1584.233570] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1587.683945] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1587.889635] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1588.091663] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1588.295828] wlan2: send auth to 34:fc:ef:db:f5:13 (try 3/3) [ 1588.499969] wlan2: authentication with 34:fc:ef:db:f5:13 timed out [ 1590.394032] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1590.599783] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1590.604241] wlan2: authenticated [ 1590.605989] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1590.620781] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=2) [ 1590.621433] wlan2: associated [ 1590.621444] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1596.010093] usb 3-1: USB disconnect, device number 30 [ 1596.174195] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1596.302487] cfg80211: Calling CRDA to update world regulatory domain [ 1596.305150] cfg80211: World regulatory domain updated: [ 1596.305153] cfg80211: DFS Master region: unset [ 1596.305154] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1596.305156] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1596.305157] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1596.305159] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1596.305160] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 1596.305161] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1596.305162] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1596.305163] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1596.305165] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1596.598544] usb 3-1: new high-speed USB device number 31 using xhci_hcd [ 1596.733148] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1596.733152] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1596.733154] usb 3-1: Product: RTL8187_Wireless [ 1596.733155] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1596.733156] usb 3-1: SerialNumber: 00C0CA751352 [ 1596.848330] ieee80211 phy28: Selected rate control algorithm 'minstrel_ht' [ 1596.848470] ieee80211 phy28: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1596.856849] rtl8187: Customer ID is 0xFF [ 1596.857185] rtl8187: wireless switch is on [ 1596.864631] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1598.720971] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1602.219600] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1602.429308] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1602.431423] wlan2: authenticated [ 1602.435539] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1602.639402] wlan2: associate with 34:fc:ef:db:f5:13 (try 2/3) [ 1602.843563] wlan2: associate with 34:fc:ef:db:f5:13 (try 3/3) [ 1603.047729] wlan2: association with 34:fc:ef:db:f5:13 timed out [ 1604.937733] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1605.143529] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1605.345564] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1605.349956] wlan2: authenticated [ 1605.353566] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1605.369576] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=3) [ 1605.370286] wlan2: associated [ 1605.370296] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1605.497432] wlan2: deauthenticated from 34:fc:ef:db:f5:13 (Reason: 3=DEAUTH_LEAVING) [ 1605.610485] cfg80211: Calling CRDA to update world regulatory domain [ 1605.613094] cfg80211: World regulatory domain updated: [ 1605.613097] cfg80211: DFS Master region: unset [ 1605.613098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1605.613100] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1605.613102] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1605.613103] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1605.613104] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 1605.613106] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1605.613107] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1605.613108] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1605.613109] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1607.383715] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1607.589511] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1607.592913] wlan2: authenticated [ 1607.595400] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1607.606658] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=4) [ 1607.607165] wlan2: associated [ 1622.747763] iwlwifi 0000:08:00.0 wlan1: renamed from wlan0 [ 1622.781759] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 1622.782040] iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled [ 1622.793597] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 1638.418823] wlan1: authenticate with 34:fc:ef:db:f5:13 [ 1638.422230] wlan1: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1638.425425] wlan1: authenticated [ 1638.428296] wlan1: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1638.442304] wlan1: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=5) [ 1638.443881] wlan1: associated [ 1638.443927] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 1662.643928] usb 3-1: USB disconnect, device number 31 [ 1662.811953] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1663.224229] usb 3-1: new high-speed USB device number 32 using xhci_hcd [ 1663.358886] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1663.358890] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1663.358891] usb 3-1: Product: RTL8187_Wireless [ 1663.358893] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1663.358894] usb 3-1: SerialNumber: 00C0CA751352 [ 1663.473971] ieee80211 phy29: Selected rate control algorithm 'minstrel_ht' [ 1663.474109] ieee80211 phy29: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1663.482012] rtl8187: Customer ID is 0xFF [ 1663.482319] rtl8187: wireless switch is on [ 1663.489742] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1665.354816] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1665.520346] usb 3-1: USB disconnect, device number 32 [ 1665.934480] usb 3-1: new high-speed USB device number 33 using xhci_hcd [ 1666.068866] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1666.068870] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1666.068872] usb 3-1: Product: RTL8187_Wireless [ 1666.068873] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1666.068875] usb 3-1: SerialNumber: 00C0CA751352 [ 1666.183017] ieee80211 phy30: Selected rate control algorithm 'minstrel_ht' [ 1666.183152] ieee80211 phy30: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1666.191012] rtl8187: Customer ID is 0xFF [ 1666.191322] rtl8187: wireless switch is on [ 1666.245402] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1668.101003] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1670.047787] usb 3-1: USB disconnect, device number 33 [ 1670.406086] usb 3-1: new high-speed USB device number 34 using xhci_hcd [ 1670.540633] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1670.540637] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1670.540639] usb 3-1: Product: RTL8187_Wireless [ 1670.540641] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1670.540642] usb 3-1: SerialNumber: 00C0CA751352 [ 1670.656013] ieee80211 phy31: Selected rate control algorithm 'minstrel_ht' [ 1670.656159] ieee80211 phy31: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1670.664061] rtl8187: Customer ID is 0xFF [ 1670.664371] rtl8187: wireless switch is on [ 1670.716988] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1672.596562] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1676.023083] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1676.232933] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1676.434931] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1676.639044] wlan2: send auth to 34:fc:ef:db:f5:13 (try 3/3) [ 1676.843264] wlan2: authentication with 34:fc:ef:db:f5:13 timed out [ 1678.753566] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1678.958921] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1678.963634] wlan2: authenticated [ 1678.965260] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1678.989502] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=6) [ 1678.990339] wlan2: associated [ 1678.990349] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1693.449419] usb 3-1: USB disconnect, device number 34 [ 1693.457085] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1693.892972] usb 3-1: new high-speed USB device number 35 using xhci_hcd [ 1694.027583] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1694.027586] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1694.027588] usb 3-1: Product: RTL8187_Wireless [ 1694.027590] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1694.027591] usb 3-1: SerialNumber: 00C0CA751352 [ 1694.144353] ieee80211 phy32: Selected rate control algorithm 'minstrel_ht' [ 1694.144493] ieee80211 phy32: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1694.152313] rtl8187: Customer ID is 0xFF [ 1694.152617] rtl8187: wireless switch is on [ 1694.204093] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1696.059523] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1699.509954] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1699.715087] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1699.917853] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1700.122016] wlan2: send auth to 34:fc:ef:db:f5:13 (try 3/3) [ 1700.326186] wlan2: authentication with 34:fc:ef:db:f5:13 timed out [ 1702.212255] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1702.421489] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1702.425963] wlan2: authenticated [ 1702.428190] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1702.441770] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=7) [ 1702.442464] wlan2: associated [ 1702.442490] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1705.680890] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1756.559156] usb 3-1: USB disconnect, device number 35 [ 1757.015896] usb 3-1: new high-speed USB device number 36 using xhci_hcd [ 1757.150519] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1757.150523] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1757.150525] usb 3-1: Product: RTL8187_Wireless [ 1757.150526] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1757.150527] usb 3-1: SerialNumber: 00C0CA751352 [ 1757.264974] ieee80211 phy33: Selected rate control algorithm 'minstrel_ht' [ 1757.265114] ieee80211 phy33: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1757.272998] rtl8187: Customer ID is 0xFF [ 1757.273305] rtl8187: wireless switch is on [ 1757.280875] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1759.146279] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1762.597152] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1762.806659] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1762.810522] wlan2: authenticated [ 1762.812926] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1762.831146] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=8) [ 1762.831834] wlan2: associated [ 1762.831844] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1775.257134] usb 3-1: USB disconnect, device number 36 [ 1775.264942] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1775.682951] usb 3-1: new high-speed USB device number 37 using xhci_hcd [ 1775.817182] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1775.817186] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1775.817188] usb 3-1: Product: RTL8187_Wireless [ 1775.817189] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1775.817190] usb 3-1: SerialNumber: 00C0CA751352 [ 1775.933386] ieee80211 phy34: Selected rate control algorithm 'minstrel_ht' [ 1775.933539] ieee80211 phy34: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1775.941590] rtl8187: Customer ID is 0xFF [ 1775.941945] rtl8187: wireless switch is on [ 1775.950146] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1777.805647] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1778.170024] usb 3-1: USB disconnect, device number 37 [ 1778.605375] usb 3-1: new high-speed USB device number 38 using xhci_hcd [ 1778.739953] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1778.739956] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1778.739958] usb 3-1: Product: RTL8187_Wireless [ 1778.739960] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1778.739961] usb 3-1: SerialNumber: 00C0CA751352 [ 1778.854002] ieee80211 phy35: Selected rate control algorithm 'minstrel_ht' [ 1778.854137] ieee80211 phy35: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1778.862060] rtl8187: Customer ID is 0xFF [ 1778.862369] rtl8187: wireless switch is on [ 1778.869767] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1780.739685] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1780.927467] usb 3-1: USB disconnect, device number 38 [ 1781.287547] usb 3-1: new high-speed USB device number 39 using xhci_hcd [ 1781.421738] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1781.421743] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1781.421745] usb 3-1: Product: RTL8187_Wireless [ 1781.421746] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1781.421747] usb 3-1: SerialNumber: 00C0CA751352 [ 1781.538460] ieee80211 phy36: Selected rate control algorithm 'minstrel_ht' [ 1781.538607] ieee80211 phy36: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1781.546523] rtl8187: Customer ID is 0xFF [ 1781.546839] rtl8187: wireless switch is on [ 1781.554296] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1783.450332] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1786.872607] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1787.077611] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1787.081437] wlan2: authenticated [ 1787.084522] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1787.288317] wlan2: associate with 34:fc:ef:db:f5:13 (try 2/3) [ 1787.492524] wlan2: associate with 34:fc:ef:db:f5:13 (try 3/3) [ 1787.696659] wlan2: association with 34:fc:ef:db:f5:13 timed out [ 1789.574864] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1789.779840] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1789.982533] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1789.985334] wlan2: authenticated [ 1789.986499] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1789.999730] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=9) [ 1790.000533] wlan2: associated [ 1790.000562] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1843.577672] usb 3-1: USB disconnect, device number 39 [ 1843.585737] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1844.062163] usb 3-1: new high-speed USB device number 40 using xhci_hcd [ 1844.196912] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1844.196916] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1844.196918] usb 3-1: Product: RTL8187_Wireless [ 1844.196920] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1844.196921] usb 3-1: SerialNumber: 00C0CA751352 [ 1844.315436] ieee80211 phy37: Selected rate control algorithm 'minstrel_ht' [ 1844.315572] ieee80211 phy37: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1844.323581] rtl8187: Customer ID is 0xFF [ 1844.323935] rtl8187: wireless switch is on [ 1844.330988] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1846.208914] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1849.631348] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1849.840845] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1850.042952] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1850.247149] wlan2: send auth to 34:fc:ef:db:f5:13 (try 3/3) [ 1850.451314] wlan2: authentication with 34:fc:ef:db:f5:13 timed out [ 1852.317444] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1852.530904] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1852.537162] wlan2: authenticated [ 1852.541000] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1852.560444] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=10) [ 1852.560839] wlan2: associated [ 1852.560847] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 1866.592298] usb 3-1: USB disconnect, device number 40 [ 1866.745482] wlan2: deauthenticating from 34:fc:ef:db:f5:13 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1867.244830] usb 3-1: new high-speed USB device number 41 using xhci_hcd [ 1867.379419] usb 3-1: New USB device found, idVendor=0bda, idProduct=8187 [ 1867.379422] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1867.379424] usb 3-1: Product: RTL8187_Wireless [ 1867.379426] usb 3-1: Manufacturer: Manufacturer_Realtek_RTL8187_ [ 1867.379427] usb 3-1: SerialNumber: 00C0CA751352 [ 1867.492820] ieee80211 phy38: Selected rate control algorithm 'minstrel_ht' [ 1867.492957] ieee80211 phy38: hwaddr 00:c0:ca:75:13:52, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 1867.500774] rtl8187: Customer ID is 0xFF [ 1867.501095] rtl8187: wireless switch is on [ 1867.508203] rtl8187 3-1:1.0 wlan2: renamed from wlan0 [ 1869.387391] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 1872.849969] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1873.063053] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1873.265719] wlan2: send auth to 34:fc:ef:db:f5:13 (try 2/3) [ 1873.469854] wlan2: send auth to 34:fc:ef:db:f5:13 (try 3/3) [ 1873.674049] wlan2: authentication with 34:fc:ef:db:f5:13 timed out [ 1875.564277] wlan2: authenticate with 34:fc:ef:db:f5:13 [ 1875.769172] wlan2: send auth to 34:fc:ef:db:f5:13 (try 1/3) [ 1875.771272] wlan2: authenticated [ 1875.772036] wlan2: associate with 34:fc:ef:db:f5:13 (try 1/3) [ 1875.786016] wlan2: RX AssocResp from 34:fc:ef:db:f5:13 (capab=0x421 status=0 aid=1) [ 1875.786829] wlan2: associated [ 1875.786839] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready