View Issue Details

IDProjectCategoryView StatusLast Update
0007073Kali Linux[All Projects] General Bugpublic2021-03-16 07:19
Reporterjohn285 Assigned To 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
Product Version 
Target VersionFixed in Version 
Summary0007073: USB adapter not work
DescriptionUSB adapter not work

Bus 006 Device 002: ID 0a5c:2101 Broadcom Corp. BCM2045 Bluetooth

Activities

steev

2021-03-02 20:15

developer   ~0014264

Can you give more information? After plugging it in and starting the bluetooth service, what is the output of "hcitool dev" ? Is there any information in dmesg?

john285

2021-03-16 02:49

reporter   ~0014353

[ 0.326581] x86/mm: Memory block size: 128MB
[ 0.327420] PM: Registering ACPI NVS region [mem 0x9ca89000-0x9cb59fff] (856064 bytes)
[ 0.327420] PM: Registering ACPI NVS region [mem 0x9e4d2000-0x9e4d9fff] (32768 bytes)
[ 0.327420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.327420] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.327420] pinctrl core: initialized pinctrl subsystem
[ 0.327420] NET: Registered protocol family 16
[ 0.330079] audit: initializing netlink subsys (disabled)
[ 0.330099] audit: type=2000 audit(1615436160.156:1): state=initialized audit_enabled=0 res=1
[ 0.330324] thermal_sys: Registered thermal governor 'fair_share'
[ 0.330327] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.330329] thermal_sys: Registered thermal governor 'step_wise'
[ 0.330331] thermal_sys: Registered thermal governor 'user_space'
[ 0.330334] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.330366] cpuidle: using governor ladder
[ 0.330380] cpuidle: using governor menu
[ 0.330417] ACPI: bus type PCI registered
[ 0.330417] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.330417] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.330417] PCI: not using MMCONFIG
[ 0.330417] PCI: Using configuration type 1 for base access
[ 0.330417] PCI: Using configuration type 1 for extended access
[ 0.330846] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.330848] mtrr: probably your BIOS does not setup all CPUs.
[ 0.330849] mtrr: corrected configuration.
[ 0.334074] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.334074] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.878248] ACPI: Added _OSI(Module Device)
[ 0.878252] ACPI: Added _OSI(Processor Device)
[ 0.878255] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.878257] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.878261] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.878264] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.878267] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.894820] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.903848] ACPI: Interpreter enabled
[ 0.903911] ACPI: (supports S0 S3 S4 S5)
[ 0.903915] ACPI: Using IOAPIC for interrupt routing
[ 0.904317] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.904446] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.904482] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.905739] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.925077] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.925092] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.925632] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.926153] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.926974] PCI host bridge to bus 0000:00
[ 0.926981] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.926985] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.926989] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.926993] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.926997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.927001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.927005] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.927009] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.927036] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.927316] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[ 0.927337] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.927350] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.927360] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.927369] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.927380] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.927389] pci 0000:00:01.0: enabling Extended Tags
[ 0.927449] pci 0000:00:01.0: supports D1 D2
[ 0.927453] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.927700] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.927720] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.927758] pci 0000:00:01.1: enabling Extended Tags
[ 0.927813] pci 0000:00:01.1: supports D1 D2
[ 0.927999] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.928209] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[ 0.928256] pci 0000:00:02.2: enabling Extended Tags
[ 0.928322] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.928607] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.928653] pci 0000:00:02.3: enabling Extended Tags
[ 0.928718] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.929022] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.929048] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.929171] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.929431] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.929450] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.929460] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.929471] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.929481] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.929491] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.929502] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.929564] pci 0000:00:11.0: PME# supported from D3hot
[ 0.929799] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.929817] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[ 0.930111] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.930129] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[ 0.930214] pci 0000:00:12.2: supports D1 D2
[ 0.930218] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.930442] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.930460] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[ 0.930736] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.930754] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[ 0.930839] pci 0000:00:13.2: supports D1 D2
[ 0.930843] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.931067] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.931302] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.931324] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.931398] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.931612] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.931895] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.932095] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.932277] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.932460] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.932653] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.932835] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.933123] pci 0000:01:00.0: [1283:8892] type 01 class 0x060401
[ 0.933274] pci 0000:01:00.0: supports D1 D2
[ 0.933278] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.933388] pci 0000:00:02.2: PCI bridge to [bus 01-02]
[ 0.933445] pci_bus 0000:02: extended config space not accessible
[ 0.933572] pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.933730] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.933755] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.933786] pci 0000:03:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.933806] pci 0000:03:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.933931] pci 0000:03:00.0: supports D1 D2
[ 0.933935] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.934192] pci 0000:00:02.3: PCI bridge to [bus 03]
[ 0.934201] pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
[ 0.934206] pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.934214] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.936101] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.936308] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.936523] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.936736] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.936919] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.937067] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.937216] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.937363] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.937967] iommu: Default domain type: Translated
[ 0.938058] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.938058] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.938058] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.938058] vgaarb: loaded
[ 0.938247] EDAC MC: Ver: 3.0.0
[ 0.938433] NetLabel: Initializing
[ 0.938436] NetLabel: domain hash size = 128
[ 0.938438] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.938486] NetLabel: unlabeled traffic allowed by default
[ 0.938489] PCI: Using ACPI for IRQ routing
[ 0.947121] PCI: pci_cache_line_size set to 64 bytes
[ 0.947197] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.947201] e820: reserve RAM buffer [mem 0x9ca16000-0x9fffffff]
[ 0.947205] e820: reserve RAM buffer [mem 0x9ca89000-0x9fffffff]
[ 0.947209] e820: reserve RAM buffer [mem 0x9e4d2000-0x9fffffff]
[ 0.947213] e820: reserve RAM buffer [mem 0x9e645000-0x9fffffff]
[ 0.947216] e820: reserve RAM buffer [mem 0x9ec60000-0x9fffffff]
[ 0.947220] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.947306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.947316] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.950085] clocksource: Switched to clocksource tsc-early
[ 0.983863] VFS: Disk quotas dquot_6.6.0
[ 0.983909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.984272] AppArmor: AppArmor Filesystem Enabled
[ 0.984330] pnp: PnP ACPI init
[ 0.984667] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.984686] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.984864] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.984878] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.985448] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.985454] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.985459] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.985471] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.986248] pnp 00:03: [dma 0 disabled]
[ 0.986371] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.987019] pnp 00:04: [dma 0 disabled]
[ 0.987134] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.987986] pnp 00:05: [dma 0 disabled]
[ 0.988313] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.988425] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.988503] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.988661] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.988675] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.989467] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.989472] system 00:09: [io 0x040b] has been reserved
[ 0.989476] system 00:09: [io 0x04d6] has been reserved
[ 0.989481] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.989485] system 00:09: [io 0x0c14] has been reserved
[ 0.989490] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.989494] system 00:09: [io 0x0c52] has been reserved
[ 0.989498] system 00:09: [io 0x0c6c] has been reserved
[ 0.989501] system 00:09: [io 0x0c6f] has been reserved
[ 0.989506] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.989510] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.989514] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.989518] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.989522] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.989526] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.989530] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.989535] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.989539] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.989544] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.989550] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.989556] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.989561] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.989566] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.989570] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.989576] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.989581] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.989594] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.990129] pnp: PnP ACPI: found 10 devices
[ 0.999666] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.999850] NET: Registered protocol family 2
[ 1.000248] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.000342] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.000602] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 1.000757] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.000863] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.000910] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.001112] NET: Registered protocol family 1
[ 1.001132] NET: Registered protocol family 44
[ 1.001176] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 1.001202] pci 0000:00:02.2: PCI bridge to [bus 01-02]
[ 1.001215] pci 0000:00:02.3: PCI bridge to [bus 03]
[ 1.001220] pci 0000:00:02.3: bridge window [io 0xe000-0xefff]
[ 1.001227] pci 0000:00:02.3: bridge window [mem 0xfea00000-0xfeafffff]
[ 1.001232] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 1.001244] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 1.001247] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 1.001251] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 1.001254] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.001258] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.001261] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.001265] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 1.001269] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.001272] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 1.001276] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 1.001402] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.001479] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 1.033759] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x700 took 30983 usecs
[ 1.053744] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x700 took 19500 usecs
[ 1.053748] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 1.085743] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x700 took 31229 usecs
[ 1.105737] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x700 took 19508 usecs
[ 1.105740] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 1.105804] PCI: CLS 64 bytes, default 64
[ 1.105946] Trying to unpack rootfs image as initramfs...
[ 3.637213] Freeing initrd memory: 64668K
[ 3.637317] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.637323] software IO TLB: mapped [mem 0x0000000098a16000-0x000000009ca16000] (64MB)
[ 3.637438] amd_uncore: 4 amd_nb counters detected
[ 3.637447] amd_uncore: 4 amd_l2 counters detected
[ 3.637615] LVT offset 0 assigned for vector 0x400
[ 3.637693] perf: AMD IBS detected (0x000000ff)
[ 3.638864] Initialise system trusted keyrings
[ 3.638891] Key type blacklist registered
[ 3.639037] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 3.642963] zbud: loaded
[ 3.643448] integrity: Platform Keyring initialized
[ 3.643454] Key type asymmetric registered
[ 3.643457] Asymmetric key parser 'x509' registered
[ 3.643476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.643575] io scheduler mq-deadline registered
[ 3.644226] pcieport 0000:00:02.2: PME: Signaling with IRQ 25
[ 3.644596] pcieport 0000:00:02.3: PME: Signaling with IRQ 27
[ 3.644830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.646059] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.646240] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.647255] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 3.648808] Linux agpgart interface v0.103
[ 3.649281] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 3.649284] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 3.649887] i8042: PNP: No PS/2 controller found.
[ 3.650066] mousedev: PS/2 mouse device common for all mice
[ 3.650141] rtc_cmos 00:07: RTC can wake from S4
[ 3.650473] rtc_cmos 00:07: registered as rtc0
[ 3.650506] rtc_cmos 00:07: setting system clock to 2021-03-11T04:16:03 UTC (1615436163)
[ 3.650556] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.650664] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.651580] NET: Registered protocol family 10
[ 3.671887] Segment Routing with IPv6
[ 3.671948] mip6: Mobile IPv6
[ 3.671954] NET: Registered protocol family 17
[ 3.672053] mpls_gso: MPLS GSO support
[ 3.672060] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 3.672531] microcode: microcode updated early to new patch_level=0x0700010f
[ 3.672602] microcode: CPU0: patch_level=0x0700010f
[ 3.672617] microcode: CPU1: patch_level=0x0700010f
[ 3.672630] microcode: CPU2: patch_level=0x0700010f
[ 3.672644] microcode: CPU3: patch_level=0x0700010f
[ 3.672652] microcode: Microcode Update Driver: v2.2.
[ 3.672662] IPI shorthand broadcast: enabled
[ 3.672681] sched_clock: Marking stable (3668875993, 3581214)->(3677852789, -5395582)
[ 3.672887] registered taskstats version 1
[ 3.672894] Loading compiled-in X.509 certificates
[ 3.796612] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 3.796657] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[ 3.796732] zswap: loaded using pool lzo/zbud
[ 3.797021] Key type ._fscrypt registered
[ 3.797024] Key type .fscrypt registered
[ 3.797026] Key type fscrypt-provisioning registered
[ 3.797126] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.801644] Freeing unused kernel image (initmem) memory: 2388K
[ 3.822025] Write protecting the kernel read-only data: 22528k
[ 3.823354] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 3.823766] Freeing unused kernel image (rodata/data gap) memory: 676K
[ 3.904138] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.904155] Run /init as init process
[ 3.904158] with arguments:
[ 3.904160] /init
[ 3.904162] splash
[ 3.904164] with environment:
[ 3.904166] HOME=/
[ 3.904168] TERM=linux
[ 3.904170] BOOT_IMAGE=/boot/vmlinuz-5.10.0-kali3-amd64
[ 4.269499] button: module verification failed: signature and/or required key missing - tainting kernel
[ 4.270661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.271051] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.271669] acpi device:01: registered as cooling_device4
[ 4.271806] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 4.289846] ACPI: Power Button [PWRB]
[ 4.290116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.290275] ACPI: Power Button [PWRF]
[ 4.295992] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.296000] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 4.296165] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 4.315797] ACPI: bus type USB registered
[ 4.315871] usbcore: registered new interface driver usbfs
[ 4.315898] usbcore: registered new interface driver hub
[ 4.315939] usbcore: registered new device driver usb
[ 4.318530] cryptd: max_cpu_qlen set to 1000
[ 4.318929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.319465] ehci-pci: EHCI PCI platform driver
[ 4.319859] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.319883] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.319900] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.319912] ehci-pci 0000:00:12.2: debug port 1
[ 4.320016] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[ 4.322114] AVX version of gcm_enc/dec engaged.
[ 4.322119] AES CTR mode by8 optimization enabled
[ 4.323197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.330558] SCSI subsystem initialized
[ 4.334077] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.334295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.334301] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.334304] usb usb1: Product: EHCI Host Controller
[ 4.334308] usb usb1: Manufacturer: Linux 5.10.0-kali3-amd64 ehci_hcd
[ 4.334311] usb usb1: SerialNumber: 0000:00:12.2
[ 4.334650] hub 1-0:1.0: USB hub found
[ 4.334678] hub 1-0:1.0: 4 ports detected
[ 4.335415] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.335430] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.335441] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.335452] ehci-pci 0000:00:13.2: debug port 1
[ 4.335525] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[ 4.341581] libata version 3.00 loaded.
[ 4.345467] ahci 0000:00:11.0: version 3.0
[ 4.346112] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 4.346125] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 4.347207] scsi host0: ahci
[ 4.350832] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.351170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.351176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.351180] usb usb2: Product: EHCI Host Controller
[ 4.351183] usb usb2: Manufacturer: Linux 5.10.0-kali3-amd64 ehci_hcd
[ 4.351186] usb usb2: SerialNumber: 0000:00:13.2
[ 4.351561] hub 2-0:1.0: USB hub found
[ 4.351588] hub 2-0:1.0: 4 ports detected
[ 4.352010] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.352033] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 4.352243] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 4.352805] ohci-pci: OHCI PCI platform driver
[ 4.353027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 4.353032] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.353036] usb usb3: Product: xHCI Host Controller
[ 4.353039] usb usb3: Manufacturer: Linux 5.10.0-kali3-amd64 xhci-hcd
[ 4.353042] usb usb3: SerialNumber: 0000:00:10.0
[ 4.353078] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.353493] hub 3-0:1.0: USB hub found
[ 4.353524] hub 3-0:1.0: 2 ports detected
[ 4.353848] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 4.353924] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 4.353928] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.353938] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 4.353946] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 4.355671] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.355788] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 4.355792] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.355795] usb usb5: Product: xHCI Host Controller
[ 4.355798] usb usb5: Manufacturer: Linux 5.10.0-kali3-amd64 xhci-hcd
[ 4.355801] usb usb5: SerialNumber: 0000:00:10.0
[ 4.356294] hub 5-0:1.0: USB hub found
[ 4.356330] hub 5-0:1.0: 2 ports detected
[ 4.356944] scsi host1: ahci
[ 4.357133] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 30
[ 4.357139] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 30
[ 4.360981] libphy: r8169: probed
[ 4.361437] r8169 0000:03:00.0 eth0: RTL8168g/8111g, e0:d5:5e:26:0a:02, XID 4c0, IRQ 29
[ 4.361442] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 4.384388] [drm] radeon kernel modesetting enabled.
[ 4.384497] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 4.385517] Console: switching to colour dummy device 80x25
[ 4.386237] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1458:0xD000 0x00).
[ 4.386278] [drm] doorbell mmio base: 0xD0000000
[ 4.386280] [drm] doorbell mmio size: 8388608
[ 4.386372] ATOM BIOS: AMD
[ 4.386454] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 4.386459] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 4.386467] [drm] Detected VRAM RAM=512M, BAR=256M
[ 4.386469] [drm] RAM width 128bits DDR
[ 4.386605] [TTM] Zone kernel: Available graphics memory: 1729122 KiB
[ 4.386608] [TTM] Initializing pool allocator
[ 4.386621] [TTM] Initializing DMA pool allocator
[ 4.386666] [drm] radeon: 512M of VRAM memory ready
[ 4.386669] [drm] radeon: 2048M of GTT memory ready.
[ 4.386690] [drm] Loading kabini Microcode
[ 4.386777] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_pfp.bin
[ 4.386836] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_me.bin
[ 4.386893] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_ce.bin
[ 4.386968] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_mec.bin
[ 4.387023] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_rlc.bin
[ 4.387076] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_sdma.bin
[ 4.387084] [drm] Internal thermal controller without fan control
[ 4.388477] [drm] radeon: dpm initialized
[ 4.388724] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/bonaire_uvd.bin
[ 4.388734] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 4.388908] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_vce.bin
[ 4.391966] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 4.392006] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 4.418177] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 4.418186] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.418189] usb usb4: Product: OHCI PCI host controller
[ 4.418193] usb usb4: Manufacturer: Linux 5.10.0-kali3-amd64 ohci_hcd
[ 4.418196] usb usb4: SerialNumber: 0000:00:12.0
[ 4.418558] hub 4-0:1.0: USB hub found
[ 4.418584] hub 4-0:1.0: 4 ports detected
[ 4.419321] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.419343] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 4.419398] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[ 4.438555] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 4.438764] radeon 0000:00:01.0: WB enabled
[ 4.438802] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 4.438807] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
[ 4.438811] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
[ 4.438814] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 4.438818] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
[ 4.439705] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 4.440048] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
[ 4.440052] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
[ 4.440368] radeon 0000:00:01.0: radeon: using MSI.
[ 4.440416] [drm] radeon: irq initialized.
[ 4.445536] [drm] ring test on 0 succeeded in 2 usecs
[ 4.445634] [drm] ring test on 1 succeeded in 3 usecs
[ 4.445661] [drm] ring test on 2 succeeded in 3 usecs
[ 4.445910] [drm] ring test on 3 succeeded in 4 usecs
[ 4.445920] [drm] ring test on 4 succeeded in 4 usecs
[ 4.482146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 4.482151] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.482154] usb usb6: Product: OHCI PCI host controller
[ 4.482158] usb usb6: Manufacturer: Linux 5.10.0-kali3-amd64 ohci_hcd
[ 4.482161] usb usb6: SerialNumber: 0000:00:13.0
[ 4.482491] hub 6-0:1.0: USB hub found
[ 4.482524] hub 6-0:1.0: 4 ports detected
[ 4.491875] [drm] ring test on 5 succeeded in 1 usecs
[ 4.511757] [drm] UVD initialized successfully.
[ 4.621026] [drm] ring test on 6 succeeded in 16 usecs
[ 4.621040] [drm] ring test on 7 succeeded in 3 usecs
[ 4.621041] [drm] VCE initialized successfully.
[ 4.622757] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.622921] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.623081] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.623244] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.623404] [drm] ib test on ring 4 succeeded in 0 usecs
[ 4.650059] tsc: Refined TSC clocksource calibration: 1297.566 MHz
[ 4.650069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b422bd00e, max_idle_ns: 440795235945 ns
[ 4.650104] clocksource: Switched to clocksource tsc
[ 4.746033] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.834044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.838046] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.838399] ata2.00: ATA-8: TOSHIBA MK3276GSX, GS001C, max UDMA/100
[ 4.838404] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.838804] ata2.00: configured for UDMA/100
[ 4.840392] ata1.00: HPA detected: current 1953523055, native 1953525168
[ 4.840470] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 4.840475] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.846942] ata1.00: configured for UDMA/133
[ 4.847222] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1113 PQ: 0 ANSI: 5
[ 4.847929] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3276GS 1C PQ: 0 ANSI: 5
[ 4.855748] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.855751] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 4.855789] sd 0:0:0:0: [sda] Write Protect is off
[ 4.855794] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.855796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.855801] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.855857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.855863] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.877960] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.916719] usb 2-1: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 4.916724] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.916728] usb 2-1: Product: 802.11 n WLAN
[ 4.916731] usb 2-1: Manufacturer: MediaTek
[ 4.916734] usb 2-1: SerialNumber: 1.0
[ 4.972466] sdb: sdb1 sdb2 < sdb5 >
[ 4.973481] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.010053] usb 4-3: new low-speed USB device number 2 using ohci-pci
[ 5.162130] [drm] ib test on ring 5 succeeded
[ 5.184383] [drm] ib test on ring 6 succeeded
[ 5.185852] [drm] ib test on ring 7 succeeded
[ 5.186809] [drm] Radeon Display Connectors
[ 5.186812] [drm] Connector 0:
[ 5.186814] [drm] HDMI-A-1
[ 5.186816] [drm] HPD1
[ 5.186820] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 5.186822] [drm] Encoders:
[ 5.186824] [drm] DFP1: INTERNAL_UNIPHY
[ 5.186826] [drm] Connector 1:
[ 5.186827] [drm] DVI-D-1
[ 5.186829] [drm] HPD2
[ 5.186832] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.186833] [drm] Encoders:
[ 5.186835] [drm] DFP2: INTERNAL_UNIPHY
[ 5.186837] [drm] Connector 2:
[ 5.186838] [drm] VGA-1
[ 5.186842] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 5.186843] [drm] Encoders:
[ 5.186845] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.224067] usb 4-3: New USB device found, idVendor=1a2c, idProduct=4094, bcdDevice= 1.10
[ 5.224076] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.224080] usb 4-3: Product: USB Keyboard
[ 5.224083] usb 4-3: Manufacturer: SEMICO
[ 5.231562] hid: raw HID events driver (C) Jiri Kosina
[ 5.243400] usbcore: registered new interface driver usbhid
[ 5.243404] usbhid: USB HID core driver
[ 5.246826] input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:1A2C:4094.0001/input/input3
[ 5.306371] hid-generic 0003:1A2C:4094.0001: input,hidraw0: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:00:12.0-3/input0
[ 5.306966] input: SEMICO USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:1A2C:4094.0002/input/input4
[ 5.353260] [drm] fb mappable at 0xC0731000
[ 5.353265] [drm] vram apper at 0xC0000000
[ 5.353267] [drm] size 5767168
[ 5.353269] [drm] fb depth is 24
[ 5.353271] [drm] pitch is 5632
[ 5.353447] fbcon: radeondrmfb (fb0) is primary device
[ 5.366154] input: SEMICO USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:1A2C:4094.0002/input/input5
[ 5.366268] hid-generic 0003:1A2C:4094.0002: input,hidraw1: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-0000:00:12.0-3/input1
[ 5.462114] Console: switching to colour frame buffer device 160x48
[ 5.469523] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 5.490630] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 5.656424] [drm] amdgpu kernel modesetting enabled.
[ 5.656634] amdgpu: Ignoring ACPI CRAT on non-APU system
[ 5.656642] Virtual CRAT table created for CPU
[ 5.656675] amdgpu: Topology: Add CPU node
[ 5.682064] usb 4-4: new low-speed USB device number 3 using ohci-pci
[ 5.876071] usb 4-4: New USB device found, idVendor=04f3, idProduct=0235, bcdDevice=24.58
[ 5.876080] usb 4-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.876084] usb 4-4: Product: OM
[ 5.883799] input: OM as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:04F3:0235.0003/input/input6
[ 5.883993] hid-generic 0003:04F3:0235.0003: input,hidraw2: USB HID v1.11 Mouse [OM] on usb-0000:00:12.0-4/input0
[ 6.067045] random: fast init done
[ 6.070874] PM: Image not found (code -22)
[ 10.466968] random: crng init done
[ 19.388949] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.865541] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 21.657980] systemd[1]: Inserted module 'autofs4'
[ 21.965219] systemd[1]: systemd 247.3-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 21.982138] systemd[1]: Detected architecture x86-64.
[ 22.000918] systemd[1]: Set hostname to <dima-E3800N>.
[ 22.310556] systemd-sysv-generator[286]: SysV service '/etc/init.d/gdomap' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.387572] systemd-sysv-generator[286]: SysV service '/etc/init.d/inetsim' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.387709] systemd-sysv-generator[286]: SysV service '/etc/init.d/inetutils-inetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.688816] systemd-sysv-generator[286]: SysV service '/etc/init.d/xl2tpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.689155] systemd-sysv-generator[286]: SysV service '/etc/init.d/ptunnel' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.730648] systemd-sysv-generator[286]: SysV service '/etc/init.d/thin' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.745664] systemd-sysv-generator[286]: SysV service '/etc/init.d/atftpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.777737] systemd-sysv-generator[286]: SysV service '/etc/init.d/rwhod' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.780642] systemd-sysv-generator[286]: SysV service '/etc/init.d/darkstat' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.780763] systemd-sysv-generator[286]: SysV service '/etc/init.d/stunnel4' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.782159] systemd-sysv-generator[286]: SysV service '/etc/init.d/dns2tcp' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 22.783096] systemd-sysv-generator[286]: SysV service '/etc/init.d/mysql' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 24.112606] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 24.609330] systemd[1]: Queued start job for default target Graphical Interface.
[ 24.612409] systemd[1]: Created slice system-getty.slice.
[ 24.613362] systemd[1]: Created slice system-modprobe.slice.
[ 24.614135] systemd[1]: Created slice User and Session Slice.
[ 24.614433] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 24.614924] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 24.615121] systemd[1]: Reached target Slices.
[ 24.615197] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[ 24.651432] systemd[1]: Listening on Syslog Socket.
[ 24.651716] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 24.651876] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 24.652302] systemd[1]: Listening on Journal Audit Socket.
[ 24.652577] systemd[1]: Listening on Journal Socket (/dev/log).
[ 24.652923] systemd[1]: Listening on Journal Socket.
[ 24.653305] systemd[1]: Listening on udev Control Socket.
[ 24.653598] systemd[1]: Listening on udev Kernel Socket.
[ 24.655792] systemd[1]: Mounting Huge Pages File System...
[ 24.658135] systemd[1]: Mounting POSIX Message Queue File System...
[ 24.660444] systemd[1]: Mounting RPC Pipe File System...
[ 24.662929] systemd[1]: Mounting Kernel Debug File System...
[ 24.665413] systemd[1]: Mounting Kernel Trace File System...
[ 24.665669] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 24.678644] systemd[1]: Starting Set the console keyboard layout...
[ 24.681102] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 24.683600] systemd[1]: Starting Load Kernel Module configfs...
[ 24.686374] systemd[1]: Starting Load Kernel Module drm...
[ 24.689006] systemd[1]: Starting Load Kernel Module fuse...
[ 24.783563] fuse: init (API version 7.32)
[ 24.817178] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 24.817320] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 24.821605] systemd[1]: Starting Journal Service...
[ 24.825468] systemd[1]: Starting Load Kernel Modules...
[ 24.828095] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 24.830595] systemd[1]: Starting Coldplug All udev Devices...
[ 24.836426] systemd[1]: Mounted Huge Pages File System.
[ 24.836819] systemd[1]: Mounted POSIX Message Queue File System.
[ 24.837121] systemd[1]: Mounted Kernel Debug File System.
[ 24.837436] systemd[1]: Mounted Kernel Trace File System.
[ 24.838356] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 24.839248] systemd[1]: modprobe@configfs.service: Succeeded.
[ 24.839827] systemd[1]: Finished Load Kernel Module configfs.
[ 24.840567] systemd[1]: modprobe@drm.service: Succeeded.
[ 24.841103] systemd[1]: Finished Load Kernel Module drm.
[ 24.841820] systemd[1]: modprobe@fuse.service: Succeeded.
[ 24.842422] systemd[1]: Finished Load Kernel Module fuse.
[ 24.845155] systemd[1]: Mounting FUSE Control File System...
[ 24.847688] systemd[1]: Mounting Kernel Configuration File System...
[ 24.852424] systemd[1]: Mounted FUSE Control File System.
[ 24.857843] systemd[1]: Mounted Kernel Configuration File System.
[ 24.909648] systemd[1]: Finished Load Kernel Modules.
[ 24.912067] systemd[1]: Starting Apply Kernel Variables...
[ 24.938725] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 24.942860] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 25.095556] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 25.095763] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 25.098106] systemd[1]: Starting Load/Save Random Seed...
[ 25.100520] systemd[1]: Starting Create System Users...
[ 25.124237] RPC: Registered named UNIX socket transport module.
[ 25.124242] RPC: Registered udp transport module.
[ 25.124244] RPC: Registered tcp transport module.
[ 25.124246] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.127479] systemd[1]: Mounted RPC Pipe File System.
[ 25.231682] systemd[1]: Started Journal Service.
[ 25.380418] systemd-journald[304]: Received client request to flush runtime journal.
[ 25.980906] systemd-journald[304]: File /var/log/journal/bd90d72a57d74bd0833845c457b672b1/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 28.862196] acpi_cpufreq: overriding BIOS provided _PSD data
[ 29.070917] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 29.071133] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 29.071361] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 29.309033] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.309152] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 29.350803] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 29.391481] parport_pc 00:05: reported by Plug and Play ACPI
[ 29.391584] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 29.867402] ppdev: user-space parallel port driver
[ 30.022465] kvm: Nested Virtualization enabled
[ 30.022477] SVM: kvm: Nested Paging enabled
[ 30.252153] MCE: In-kernel MCE decoding enabled.
[ 30.330283] EDAC amd64: F16h detected (node 0).
[ 30.330359] EDAC amd64: Node 0: DRAM ECC disabled.
[ 30.376009] EDAC amd64: F16h detected (node 0).
[ 30.376082] EDAC amd64: Node 0: DRAM ECC disabled.
[ 30.415499] EDAC amd64: F16h detected (node 0).
[ 30.415571] EDAC amd64: Node 0: DRAM ECC disabled.
[ 30.451462] EDAC amd64: F16h detected (node 0).
[ 30.451536] EDAC amd64: Node 0: DRAM ECC disabled.
[ 30.536862] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 30.538187] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 30.539409] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 30.540596] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 30.930127] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 31.230282] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 31.257104] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 31.284419] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 31.284925] snd_hda_intel 0000:00:01.1: device 1458:a002 is on the power_save denylist, forcing power_save to 0
[ 31.398061] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 31.484105] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 31.484119] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 31.484126] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 31.484131] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 31.484137] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 31.484141] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 31.484148] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 31.484154] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 31.484160] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 31.484165] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 31.516774] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 31.517045] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 31.517286] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 31.517531] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 31.517765] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 31.518174] snd_hda_intel 0000:00:14.2: device 1458:a002 is on the power_save denylist, forcing power_save to 0
[ 31.568939] mt7601u 2-1:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 31.620682] mt7601u 2-1:1.0: EEPROM ver:0c fae:00
[ 31.861213] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 31.862589] usbcore: registered new interface driver mt7601u
[ 32.146059] Adding 999420k swap on /dev/sdb5. Priority:-2 extents:1 across:999420k FS
[ 41.398081] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 41.426075] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 41.626178] r8169 0000:03:00.0 eth0: Link is Down
[ 44.458005] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 44.458060] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1221.277297] r8169 0000:03:00.0 eth0: Link is Down
[ 1224.319318] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1227.847318] r8169 0000:03:00.0 eth0: Link is Down
[ 1230.831694] r8169 0000:03:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 5796.546115] perf: interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[ 9416.456952] perf: interrupt took too long (3146 > 3145), lowering kernel.perf_event_max_sample_rate to 63500
[50120.021361] device-mapper: uevent: version 1.0.3
[50120.021766] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[134712.284793] perf: interrupt took too long (3954 > 3932), lowering kernel.perf_event_max_sample_rate to 50500
[301728.062617] radeon 0000:00:01.0: IH ring buffer overflow (0x00000010, 0x00000000, 0x00000020)
[426622.206565] usb 6-2: new full-speed USB device number 2 using ohci-pci
[426622.410179] usb 6-2: New USB device found, idVendor=0a5c, idProduct=2101, bcdDevice= 1.12
[426622.410190] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[426622.410196] usb 6-2: Product: BCM2045A
[426622.410201] usb 6-2: Manufacturer: Broadcom Corp
[426622.410207] usb 6-2: SerialNumber: 00027212AB4F
[426624.855033] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[426625.322603] Bluetooth: Core ver 2.22
[426625.322734] NET: Registered protocol family 31
[426625.322739] Bluetooth: HCI device and connection manager initialized
[426625.322754] Bluetooth: HCI socket layer initialized
[426625.322764] Bluetooth: L2CAP socket layer initialized
[426625.322784] Bluetooth: SCO socket layer initialized
[426625.390264] usbcore: registered new interface driver btusb

john285

2021-03-16 06:43

reporter   ~0014354

hcitool dev
Devices:

john285

2021-03-16 07:17

reporter   ~0014355

/etc/init.d/bluetooth start
Starting bluetooth (via systemctl): bluetooth.service.
                                                                        
┌──(root�dima-E3800N)-[/home/dima]
└─# hcitool dev
Devices:
        hci0 00:02:72:12:AB:4F

john285

2021-03-16 07:19

reporter   ~0014356

/etc/init.d/bluetooth status -l
● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; disabled; vendor preset: disabled)
     Active: active (running) since Tue 2021-03-16 13:16:43 +06; 2min 22s ago
       Docs: man:bluetoothd(8)
   Main PID: 366724 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 3970)
     Memory: 3.5M
        CPU: 94ms
     CGroup: /system.slice/bluetooth.service
             └─366724 /usr/libexec/bluetooth/bluetoothd

мар 16 13:16:43 dima-E3800N bluetoothd[366724]: src/main.c:parse_controller_config() Key file does not have key “LEMaxConnectionInterval” in group “Controller”
мар 16 13:16:43 dima-E3800N bluetoothd[366724]: src/main.c:parse_controller_config() Key file does not have key “LEConnectionLatency” in group “Controller”
мар 16 13:16:43 dima-E3800N bluetoothd[366724]: src/main.c:parse_controller_config() Key file does not have key “LEConnectionSupervisionTimeout” in gr…“Controller”
мар 16 13:16:43 dima-E3800N bluetoothd[366724]: src/main.c:parse_controller_config() Key file does not have key “LEAutoconnecttimeout” in group “Controller”
мар 16 13:16:43 dima-E3800N bluetoothd[366724]: Starting SDP server
мар 16 13:16:44 dima-E3800N bluetoothd[366724]: Bluetooth management interface 1.18 initialized
мар 16 13:16:44 dima-E3800N bluetoothd[366724]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
мар 16 13:16:44 dima-E3800N bluetoothd[366724]: sap-server: Operation not permitted (1)
мар 16 13:16:45 dima-E3800N bluetoothd[366724]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSink/sbc
мар 16 13:16:45 dima-E3800N bluetoothd[366724]: Endpoint registered: sender=:1.29 path=/MediaEndpoint/A2DPSource/sbc

Issue History

Date Modified Username Field Change
2021-03-02 09:27 john285 New Issue
2021-03-02 20:15 steev Note Added: 0014264
2021-03-16 02:49 john285 Note Added: 0014353
2021-03-16 06:43 john285 Note Added: 0014354
2021-03-16 07:17 john285 Note Added: 0014355
2021-03-16 07:19 john285 Note Added: 0014356