0003120: Enable uas kernel module - Kali Linux Bug Tracker

ID	Project	Category	View Status	Date Submitted	Last Update

0003120	Kali Linux	Feature Requests	public	2016-03-04 21:14	2016-04-07 09:34

Reporter	L	Assigned To	rhertzog
Priority	normal	Severity	minor	Reproducibility	always
Status	closed	Resolution	unable to reproduce
Product Version	2016.1

Summary	0003120: Enable uas kernel module
Description	The uas kernel module is required to boot from certain USB hard disks. I have a USB SSD that won't work with the Kali installation, because the kernel does not contain the uas kernel module. dmesg from within Kali Linux installation (notice the 256 GB disk is not detected) https://paste.ubuntu.com/15284698/ dmesg from within Linux Mint (the disk shows up, kernel auto loads "uas" module) https://paste.ubuntu.com/15285350/
Attached Files	dmesg-15284698.txt (55,316 bytes) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-kali1-amd64 ([email protected]) (gcc version 5.3.1 20160101 (Debian 5.3.1-5) ) #1 SMP Debian 4.3.3-5kali4 (2016-01-13) [ 0.000000] Command line: BOOT_IMAGE=/install/gtk/vmlinuz video=vesa:ywrap,mtrr vga=788 --- quiet initrd=/install/gtk/initrd.gz [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096e3efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096e3f000-0x0000000096ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire 5750G/JE50_HR, BIOS V1.11 05/24/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 097000000 mask FFF000000 uncachable [ 0.000000] 3 base 098000000 mask FF8000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01d24000, 0x01d24fff] PGTABLE [ 0.000000] BRK [0x01d25000, 0x01d25fff] PGTABLE [ 0.000000] BRK [0x01d26000, 0x01d26fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x01d27000, 0x01d27fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x240000000-0x25fbfffff] [ 0.000000] [mem 0x240000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff] [ 0.000000] [mem 0x220000000-0x23fffffff] page 2M [ 0.000000] BRK [0x01d28000, 0x01d28fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x96e3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x96dfffff] page 2M [ 0.000000] [mem 0x96e00000-0x96e3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x96fff000-0x96ffffff] [ 0.000000] [mem 0x96fff000-0x96ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff] [ 0.000000] [mem 0x100000000-0x21fffffff] page 2M [ 0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7e4ab000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x0000000096FFE120 00007C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000096FFC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x0000000096FF0000 008F13 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x0000000096F6D000 000040 [ 0.000000] ACPI: FACS 0x0000000096F6D000 000040 [ 0.000000] ACPI: ASF! 0x0000000096FFD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x0000000096FFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x0000000096FFA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x0000000096FF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x0000000096FEF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FEE000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x0000000096FEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x0000000096FE9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FE8000 000780 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FE7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x25fdf6000-0x25fdf9fff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000025fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000096e3efff] [ 0.000000] node 0: [mem 0x0000000096fff000-0x0000000096ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff] [ 0.000000] On node 0 totalpages: 2059228 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9593 pages used for memmap [ 0.000000] DMA32 zone: 613952 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x97a00000-0x9f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x96e3f000-0x96ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96ebf000-0x96fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96fbf000-0x96ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x97000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88025fa00000 s93016 r8192 d29864 u262144 [ 0.000000] pcpu-alloc: s93016 r8192 d29864 u262144 alloc=12097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2026895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/install/gtk/vmlinuz video=vesa:ywrap,mtrr vga=788 --- quiet initrd=/install/gtk/initrd.gz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7998412K/8236912K available (5671K kernel code, 1049K rwdata, 2792K rodata, 1296K init, 836K bss, 238500K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.854 MHz processor [ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.70 BogoMIPS (lpj=9179416) [ 0.000038] pid_max: default: 32768 minimum: 301 [ 0.000044] ACPI: Core revision 20150818 [ 0.006713] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.006740] Security Framework initialized [ 0.006742] Yama: disabled by default; enable with sysctl kernel.yama. [ 0.006749] AppArmor: AppArmor disabled by boot time parameter [ 0.007307] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.009011] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009748] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009759] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.009987] Initializing cgroup subsys io [ 0.009992] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys devices [ 0.010002] Initializing cgroup subsys freezer [ 0.010004] Initializing cgroup subsys net_cls [ 0.010007] Initializing cgroup subsys perf_event [ 0.010009] Initializing cgroup subsys net_prio [ 0.010031] CPU: Physical Processor ID: 0 [ 0.010032] CPU: Processor Core ID: 0 [ 0.010037] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.010038] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.010040] mce: CPU supports 7 MCE banks [ 0.010051] CPU0: Thermal monitoring enabled (TM1) [ 0.010058] process: using mwait in idle threads [ 0.010061] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.010062] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.010462] Freeing SMP alternatives memory: 20K (ffffffff81c4c000 - ffffffff81c51000) [ 0.041977] ftrace: allocating 23601 entries in 93 pages [ 0.053076] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.053536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.093205] TSC deadline timer enabled [ 0.093209] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.093236] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.093256] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.093259] ... version: 3 [ 0.093260] ... bit width: 48 [ 0.093261] ... generic registers: 4 [ 0.093262] ... value mask: 0000ffffffffffff [ 0.093263] ... max period: 0000ffffffffffff [ 0.093264] ... fixed-purpose events: 3 [ 0.093265] ... event mask: 000000070000000f [ 0.093829] x86: Booting SMP configuration: [ 0.093831] .... node #0, CPUs: #1 [ 0.106926] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.107022] #2 #3 [ 0.133297] x86: Booted up 1 node, 4 CPUs [ 0.133300] smpboot: Total of 4 processors activated (18358.83 BogoMIPS) [ 0.136414] devtmpfs: initialized [ 0.139378] PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes) [ 0.139492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.139571] pinctrl core: initialized pinctrl subsystem [ 0.139712] NET: Registered protocol family 16 [ 0.149298] cpuidle: using governor ladder [ 0.160123] cpuidle: using governor menu [ 0.160196] Simple Boot Flag at 0x44 set to 0x1 [ 0.160278] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.160279] ACPI: bus type PCI registered [ 0.160281] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.160373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.160376] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.160389] PCI: Using configuration type 1 for base access [ 0.160649] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.169749] ACPI: Added _OSI(Module Device) [ 0.169751] ACPI: Added _OSI(Processor Device) [ 0.169752] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.169754] ACPI: Added _OSI(Processor Aggregator Device) [ 0.172012] ACPI: Executed 1 blocks of module-level executable AML code [ 0.174564] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.174898] ACPI: Dynamic OEM Table Load: [ 0.174906] ACPI: SSDT 0xFFFF88025709E800 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.175414] ACPI: Dynamic OEM Table Load: [ 0.175420] ACPI: SSDT 0xFFFF880255C09000 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.175848] ACPI: Dynamic OEM Table Load: [ 0.175853] ACPI: SSDT 0xFFFF880255D74A00 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.176662] ACPI : EC: EC started [ 0.184228] ACPI: Interpreter enabled [ 0.184250] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.184255] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.184269] ACPI: (supports S0 S3 S4 S5) [ 0.184271] ACPI: Using IOAPIC for interrupt routing [ 0.184299] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.287895] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.287900] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.287936] \_SB_.PCI0:_OSC invalid UUID [ 0.287937] _OSC request data:1 1f 0 [ 0.287941] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.288401] PCI host bridge to bus 0000:00 [ 0.288404] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.288406] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.288408] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.288410] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.288412] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.288420] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.288513] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.288526] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit] [ 0.288532] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.288537] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.288661] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.288709] pci 0000:00:16.0: reg 0x10: [mem 0xb0604000-0xb060400f 64bit] [ 0.288798] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.288902] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.289282] pci 0000:00:1a.0: reg 0x10: [mem 0xb060a000-0xb060a3ff] [ 0.291337] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.291437] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.291484] pci 0000:00:1b.0: reg 0x10: [mem 0xb0600000-0xb0603fff 64bit] [ 0.291587] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.291640] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.291688] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.291802] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.291854] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.291901] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.292013] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.292118] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.292492] pci 0000:00:1d.0: reg 0x10: [mem 0xb0609000-0xb06093ff] [ 0.294543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.294607] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.294656] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.294874] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.294919] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.294933] pci 0000:00:1f.2: reg 0x14: [io 0x209c-0x209f] [ 0.294946] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.294960] pci 0000:00:1f.2: reg 0x1c: [io 0x2098-0x209b] [ 0.294974] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.294987] pci 0000:00:1f.2: reg 0x24: [mem 0xb0608000-0xb06087ff] [ 0.295035] pci 0000:00:1f.2: PME# supported from D3hot [ 0.295121] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.295150] pci 0000:00:1f.3: reg 0x10: [mem 0xb0606000-0xb06060ff 64bit] [ 0.295187] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.295418] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.295491] pci 0000:02:00.0: reg 0x10: [mem 0xb0430000-0xb043ffff 64bit pref] [ 0.295520] pci 0000:02:00.0: reg 0x18: [mem 0xb0440000-0xb044ffff 64bit pref] [ 0.295573] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.295670] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.295723] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.295812] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.295880] pci 0000:02:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit pref] [ 0.296046] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.296171] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.296239] pci 0000:02:00.2: reg 0x10: [mem 0xb0410000-0xb041ffff 64bit pref] [ 0.296408] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.296530] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.296597] pci 0000:02:00.3: reg 0x10: [mem 0xb0420000-0xb042ffff 64bit pref] [ 0.296765] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.304247] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.304271] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.304381] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000 [ 0.304445] pci 0000:03:00.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit] [ 0.304599] pci 0000:03:00.0: supports D1 [ 0.304600] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.304643] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.312183] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.312197] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.360483] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.360540] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) 7 [ 0.360596] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.360651] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) 7 [ 0.360704] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.360759] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.360812] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.360865] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.360960] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.360990] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.361094] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.361096] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.361099] vgaarb: loaded [ 0.361100] vgaarb: bridge control possible 0000:00:02.0 [ 0.361230] PCI: Using ACPI for IRQ routing [ 0.374729] PCI: pci_cache_line_size set to 64 bytes [ 0.374853] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.374854] e820: reserve RAM buffer [mem 0x96e3f000-0x97ffffff] [ 0.374856] e820: reserve RAM buffer [mem 0x97000000-0x97ffffff] [ 0.374857] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.375016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.375021] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.377049] clocksource: Switched to clocksource hpet [ 0.382653] pnp: PnP ACPI init [ 0.382789] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.382792] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.382794] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.382796] system 00:00: [io 0xffff] has been reserved [ 0.382798] system 00:00: [io 0xffff] has been reserved [ 0.382800] system 00:00: [io 0x0400-0x047f] could not be reserved [ 0.382802] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.382804] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.382808] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.382840] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.382886] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.382889] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.382926] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.382971] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.429261] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.429263] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.429265] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.429267] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.429269] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.429271] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.429273] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.429275] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.429277] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.429279] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.429282] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.429479] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.429482] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved [ 0.429484] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.429499] pnp: PnP ACPI: found 7 devices [ 0.435979] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.435987] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window [ 0.436019] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff] [ 0.436022] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb007ff pref] [ 0.436025] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.436032] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff] [ 0.436037] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.436046] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.436052] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.436065] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.436067] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.436069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.436071] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 0.436073] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff] [ 0.436075] pci_bus 0000:02: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.436076] pci_bus 0000:03: resource 1 [mem 0xb0500000-0xb05fffff] [ 0.436139] NET: Registered protocol family 2 [ 0.436331] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.436496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.436626] TCP: Hash tables configured (established 65536 bind 65536) [ 0.436656] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.436690] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.436795] NET: Registered protocol family 1 [ 0.436812] pci 0000:00:02.0: Video device with shadowed ROM [ 0.469107] PCI: CLS 64 bytes, default 64 [ 0.469180] Unpacking initramfs... [ 0.975531] Freeing initrd memory: 27988K (ffff88007e4ab000 - ffff880080000000) [ 0.975553] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.975555] software IO TLB [mem 0x92e3f000-0x96e3f000] (64MB) mapped at [ffff880092e3f000-ffff880096e3efff] [ 0.975617] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.975618] hw unit of domain pp0-core 2^-16 Joules [ 0.975619] hw unit of domain package 2^-16 Joules [ 0.975620] hw unit of domain pp1-gpu 2^-16 Joules [ 0.975691] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17 [ 0.975700] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17 [ 0.975705] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17 [ 0.975713] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17 [ 0.975770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 0.975852] simple-framebuffer simple-framebuffer.0: framebuffer at 0xa0000000, 0xeb000 bytes, mapped to 0xffffc90000f00000 [ 0.975855] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=800x600x16, linelength=1600 [ 0.976543] Console: switching to colour frame buffer device 100x37 [ 0.977145] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.977457] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.977496] audit: initializing netlink subsys (disabled) [ 0.977511] audit: type=2000 audit(1457121871.944:1): initialized [ 0.977895] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.977915] zbud: loaded [ 0.978045] VFS: Disk quotas dquot_6.6.0 [ 0.978067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.978555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.978592] io scheduler noop registered [ 0.978594] io scheduler deadline registered [ 0.978610] io scheduler cfq registered (default) [ 0.978985] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.978992] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.979014] intel_idle: MWAIT substates: 0x21120 [ 0.979015] intel_idle: v0.4 model 0x2A [ 0.979016] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.979225] GHES: HEST is not enabled! [ 0.979311] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.979765] Linux agpgart interface v0.103 [ 0.979818] AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 0.979819] AMD IOMMUv2 functionality not available on this system [ 0.980276] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.018508] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.018512] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.018650] mousedev: PS/2 mouse device common for all mice [ 1.021162] rtc_cmos 00:01: RTC can wake from S4 [ 1.021334] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.021366] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.021378] Intel P-state driver initializing. [ 1.021702] ledtrig-cpu: registered to indicate activity on CPUs [ 1.022877] NET: Registered protocol family 10 [ 1.023364] mip6: Mobile IPv6 [ 1.023376] NET: Registered protocol family 17 [ 1.023412] mpls_gso: MPLS GSO support [ 1.024315] registered taskstats version 1 [ 1.024402] zswap: loaded using pool lzo/zbud [ 1.025519] rtc_cmos 00:01: setting system clock to 2016-03-04 20:04:32 UTC (1457121872) [ 1.025744] PM: Hibernation image not present or could not be loaded. [ 1.026514] Freeing unused kernel memory: 1296K (ffffffff81b08000 - ffffffff81c4c000) [ 1.026518] Write protecting the kernel read-only data: 10240k [ 1.027078] Freeing unused kernel memory: 460K (ffff88000158d000 - ffff880001600000) [ 1.027746] Freeing unused kernel memory: 1304K (ffff8800018ba000 - ffff880001a00000) [ 1.043347] random: systemd-udevd urandom read with 2 bits of entropy available [ 1.067367] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.105455] sdhci: Secure Digital Host Controller Interface driver [ 1.105460] sdhci: Copyright(c) Pierre Ossman [ 1.105513] ACPI: bus type USB registered [ 1.105575] usbcore: registered new interface driver usbfs [ 1.105605] usbcore: registered new interface driver hub [ 1.105659] usbcore: registered new device driver usb [ 1.106071] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 1.106213] sdhci-pci 0000:02:00.1: No vmmc regulator found [ 1.106217] sdhci-pci 0000:02:00.1: No vqmmc regulator found [ 1.106558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.106970] ehci-pci: EHCI PCI platform driver [ 1.107208] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.107229] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.107255] ehci-pci 0000:00:1a.0: debug port 2 [ 1.109630] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit [ 1.111177] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.111217] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb060a000 [ 1.111443] SCSI subsystem initialized [ 1.114345] libata version 3.00 loaded. [ 1.120699] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.120827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.120832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120836] usb usb1: Product: EHCI Host Controller [ 1.120839] usb usb1: Manufacturer: Linux 4.3.0-kali1-amd64 ehci_hcd [ 1.120843] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.121151] hub 1-0:1.0: USB hub found [ 1.121173] hub 1-0:1.0: 2 ports detected [ 1.121620] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.121633] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.121656] ehci-pci 0000:00:1d.0: debug port 2 [ 1.125572] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.125601] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0609000 [ 1.136689] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.136790] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.136795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.136799] usb usb2: Product: EHCI Host Controller [ 1.136803] usb usb2: Manufacturer: Linux 4.3.0-kali1-amd64 ehci_hcd [ 1.136806] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.137066] hub 2-0:1.0: USB hub found [ 1.137082] hub 2-0:1.0: 2 ports detected [ 1.137538] ahci 0000:00:1f.2: version 3.0 [ 1.137711] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.137744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 1.137748] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 1.148004] scsi host0: ahci [ 1.148226] scsi host1: ahci [ 1.148413] scsi host2: ahci [ 1.148577] scsi host3: ahci [ 1.148781] scsi host4: ahci [ 1.148931] scsi host5: ahci [ 1.149039] ata1: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608100 irq 24 [ 1.149045] ata2: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608180 irq 24 [ 1.149048] ata3: DUMMY [ 1.149050] ata4: DUMMY [ 1.149053] ata5: DUMMY [ 1.149054] ata6: DUMMY [ 1.165341] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 1.165924] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 1.165926] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1.165929] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 1.165931] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 1.165932] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 1.165935] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b [ 1.165937] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 1.176809] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 1.177591] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 1.177905] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 1.178029] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 1.432639] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.448600] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.468545] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.483834] ata1.00: ATA-8: ADATA SSD S511 120GB, 5.2.5, max UDMA/133 [ 1.483839] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.495396] ata1.00: configured for UDMA/133 [ 1.495673] scsi 0:0:0:0: Direct-Access ATA ADATA SSD S511 1 5 PQ: 0 ANSI: 5 [ 1.565325] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.565334] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.565983] hub 1-1:1.0: USB hub found [ 1.566058] hub 1-1:1.0: 6 ports detected [ 1.581094] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.581103] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.581558] hub 2-1:1.0: USB hub found [ 1.581732] hub 2-1:1.0: 6 ports detected [ 1.812433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.815841] ata2.00: ATAPI: HL-DT-ST DVDRAM GT70N, YP10, max UDMA/133 [ 1.821417] ata2.00: configured for UDMA/133 [ 1.836373] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT70N YP10 PQ: 0 ANSI: 5 [ 1.836425] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 1.851930] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.852111] sd 0:0:0:0: [sda] Write Protect is off [ 1.852118] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.852187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.852402] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 1.855293] sda: sda1 sda2 < sda5 > [ 1.855990] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.863021] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.863039] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.863354] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.972321] tsc: Refined TSC clocksource calibration: 2294.786 MHz [ 1.972328] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns [ 2.009619] usb 2-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 2.009626] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.009630] usb 2-1.1: Product: MEDION HDDrive-n-GO [ 2.009632] usb 2-1.1: Manufacturer: MEDION [ 2.009635] usb 2-1.1: SerialNumber: 31200000000000005167 [ 2.013312] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 2.013436] usb-storage 2-1.1:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 2.013474] scsi host6: usb-storage 2-1.1:1.0 [ 2.013651] usbcore: registered new interface driver usb-storage [ 2.080210] usb 2-1.2: new high-speed USB device number 4 using ehci-pci [ 2.090918] usb 1-1.3: New USB device found, idVendor=064e, idProduct=c21c [ 2.090922] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.090923] usb 1-1.3: Product: 1.3M HD WebCam [ 2.090925] usb 1-1.3: Manufacturer: SuYin [ 2.090927] usb 1-1.3: SerialNumber: HF1316-P80A-SS06-VA-R01.01.00 [ 2.178489] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 2.178492] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.178494] usb 2-1.2: Product: USB DISK 2.0 [ 2.178495] usb 2-1.2: Manufacturer: [ 2.178497] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 2.178755] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 2.179078] scsi host7: usb-storage 2-1.2:1.0 [ 2.248112] usb 2-1.3: new high-speed USB device number 5 using ehci-pci [ 2.270440] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.273437] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.274795] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.276124] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.277490] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.278778] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.280100] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.281590] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.403471] usb 2-1.3: New USB device found, idVendor=18a5, idProduct=024b [ 2.403483] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.403489] usb 2-1.3: Product: SSD [ 2.403493] usb 2-1.3: Manufacturer: Verbatim [ 2.403498] usb 2-1.3: SerialNumber: 511140305177C000B1 [ 2.525707] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01) [ 2.572056] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a. [ 2.616159] psmouse serio1: elantech: Elan sample query result 04, 0b, 00 [ 2.828856] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2 [ 2.972114] clocksource: Switched to clocksource tsc [ 3.013474] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 3.021444] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.021453] sd 6:0:0:0: [sdb] 4096-byte physical blocks [ 3.022536] sd 6:0:0:0: [sdb] Write Protect is off [ 3.022543] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.023661] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.178152] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 3.180503] sd 7:0:0:0: [sdc] 124846080 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 3.182505] sd 7:0:0:0: [sdc] Write Protect is off [ 3.182516] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 3.184517] sd 7:0:0:0: [sdc] No Caching mode page found [ 3.184524] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 3.193359] sdc: sdc1 sdc2 [ 3.199452] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 3.360678] sdb: sdb1 [ 3.364265] sd 6:0:0:0: [sdb] Attached SCSI disk [ 7.401002] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.405819] FAT-fs (sda): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.408176] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.410821] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.413833] FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.416953] FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.419751] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.422161] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.424529] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.427150] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.429614] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.432226] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.434736] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.437808] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.440935] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.444395] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.447815] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.470354] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.488653] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.509520] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.846938] vga16fb: initializing [ 7.846943] vga16fb: mapped to 0xffff8800000a0000 [ 7.846948] checking generic (a0000000 eb000) vs hw (a0000 10000) [ 7.847011] fb1: VGA16 VGA frame buffer device [ 12.064667] random: nonblocking pool is initialized [ 27.735804] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 27.737312] ISO 9660 Extensions: RRIP_1991A [ 27.874489] ISOFS: File unit size != 0 for ISO file (31744). [ 46.366322] pps_core: LinuxPPS API ver. 1 registered [ 46.366324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 46.366499] PTP clock support registered [ 46.367030] tg3.c:v3.137 (May 11, 2014) [ 46.397279] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:70:f4:ac:a5:56 [ 46.397284] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 46.397288] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 46.397291] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 46.410123] tg3 0000:02:00.0 enp2s0f0: renamed from eth0 [ 46.472347] ath: phy0: ASPM enabled: 0x42 [ 46.472350] ath: EEPROM regdomain: 0x65 [ 46.472351] ath: EEPROM indicates we should expect a direct regpair map [ 46.472353] ath: Country alpha2 being used: 00 [ 46.472354] ath: Regpair used: 0x65 [ 46.483219] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 46.483471] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001020000, irq=17 [ 46.484505] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 48.651159] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 49.135077] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 51.210480] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 54.709439] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 81.722267] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 136.172648] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 177.142314] raid6: sse2x1 gen() 6833 MB/s [ 177.210284] raid6: sse2x1 xor() 5842 MB/s [ 177.278247] raid6: sse2x2 gen() 9623 MB/s [ 177.346209] raid6: sse2x2 xor() 6999 MB/s [ 177.414174] raid6: sse2x4 gen() 11192 MB/s [ 177.482140] raid6: sse2x4 xor() 8348 MB/s [ 177.482141] raid6: using algorithm sse2x4 gen() 11192 MB/s [ 177.482142] raid6: .... xor() 8348 MB/s, rmw enabled [ 177.482143] raid6: using ssse3x2 recovery algorithm [ 177.482364] xor: automatically using best checksumming function: [ 177.522118] avx : 21510.000 MB/sec [ 177.526265] Btrfs loaded [ 177.536942] JFS: nTxBlock = 8192, nTxLock = 65536 [ 177.547588] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 178.033639] device-mapper: uevent: version 1.0.3 [ 178.033750] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: [email protected] [ 191.957165] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 195.455271] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 212.265570] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 215.765079] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 261.207465] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready [ 263.979387] tg3 0000:02:00.0 enp2s0f0: Link is up at 1000 Mbps, full duplex [ 263.979407] tg3 0000:02:00.0 enp2s0f0: Flow control is on for TX and on for RX [ 263.979422] tg3 0000:02:00.0 enp2s0f0: EEE is disabled [ 263.979464] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready [ 595.048495] tg3 0000:02:00.0 enp2s0f0: Link is down [ 597.757262] tg3 0000:02:00.0 enp2s0f0: Link is up at 1000 Mbps, full duplex [ 597.757284] tg3 0000:02:00.0 enp2s0f0: Flow control is on for TX and on for RX [ 597.757292] tg3 0000:02:00.0 enp2s0f0: EEE is disabled [ 602.384001] tg3 0000:02:00.0 enp2s0f0: Link is down [ 605.113392] tg3 0000:02:00.0 enp2s0f0: Link is up at 1000 Mbps, full duplex [ 605.113412] tg3 0000:02:00.0 enp2s0f0: Flow control is on for TX and on for RX [ 605.113420] tg3 0000:02:00.0 enp2s0f0: EEE is disabled [ 719.555352] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 828.857320] usb 2-1.1: USB disconnect, device number 3 [ 828.858008] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 828.858083] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 841.906723] usb 2-1.2: USB disconnect, device number 4 [ 842.117070] usb 2-1.2: new full-speed USB device number 6 using ehci-pci [ 842.189043] usb 2-1.2: device descriptor read/64, error -32 [ 842.616835] usb 2-1.2: new high-speed USB device number 7 using ehci-pci [ 842.715591] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 842.715604] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 842.715612] usb 2-1.2: Product: USB DISK 2.0 [ 842.715618] usb 2-1.2: Manufacturer: [ 842.715625] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 842.716237] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 842.716614] scsi host8: usb-storage 2-1.2:1.0 [ 843.718427] scsi 8:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 843.720471] sd 8:0:0:0: [sdb] 124846080 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 843.722355] sd 8:0:0:0: [sdb] Write Protect is off [ 843.722366] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 843.724349] sd 8:0:0:0: [sdb] No Caching mode page found [ 843.724358] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 843.733471] sdb: sdb1 sdb2 [ 843.739453] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 860.840880] usb 2-1.2: USB disconnect, device number 7 [ 861.063348] usb 2-1.2: new high-speed USB device number 8 using ehci-pci [ 861.162253] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 861.162265] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 861.162272] usb 2-1.2: Product: USB DISK 2.0 [ 861.162279] usb 2-1.2: Manufacturer: [ 861.162284] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 861.162858] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 861.163068] scsi host9: usb-storage 2-1.2:1.0 [ 862.164963] scsi 9:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 862.167282] sd 9:0:0:0: [sdb] 124846080 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 862.169270] sd 9:0:0:0: [sdb] Write Protect is off [ 862.169285] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 862.171427] sd 9:0:0:0: [sdb] No Caching mode page found [ 862.171436] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 862.180273] sdb: sdb1 sdb2 [ 862.186363] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 868.005188] usb 2-1.2: USB disconnect, device number 8 [ 868.817188] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 868.828420] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 868.828581] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 868.835498] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 869.483047] usb 2-1.2: new high-speed USB device number 9 using ehci-pci [ 869.581998] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 869.582012] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 869.582020] usb 2-1.2: Product: USB DISK 2.0 [ 869.582028] usb 2-1.2: Manufacturer: [ 869.582035] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 869.582610] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 869.582851] scsi host10: usb-storage 2-1.2:1.0 [ 869.795878] usb 2-1.2: USB disconnect, device number 9 [ 875.112157] usb 2-1.2: new high-speed USB device number 10 using ehci-pci [ 875.211201] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 875.211213] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 875.211220] usb 2-1.2: Product: USB DISK 2.0 [ 875.211227] usb 2-1.2: Manufacturer: [ 875.211234] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 875.211806] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 875.212206] scsi host11: usb-storage 2-1.2:1.0 [ 876.213712] scsi 11:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 876.215963] sd 11:0:0:0: [sdb] 124846080 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 876.217958] sd 11:0:0:0: [sdb] Write Protect is off [ 876.217970] sd 11:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 876.220042] sd 11:0:0:0: [sdb] No Caching mode page found [ 876.220055] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 876.228893] sdb: sdb1 sdb2 [ 876.235059] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 876.960316] usb 2-1.2: USB disconnect, device number 10 [ 877.179072] usb 2-1.2: new high-speed USB device number 11 using ehci-pci [ 877.278123] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4200 [ 877.278136] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 877.278144] usb 2-1.2: Product: USB DISK 2.0 [ 877.278151] usb 2-1.2: Manufacturer: [ 877.278157] usb 2-1.2: SerialNumber: 070B4B153B68A630 [ 877.278685] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 877.278844] scsi host12: usb-storage 2-1.2:1.0 [ 878.280459] scsi 12:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 878.282804] sd 12:0:0:0: [sdb] 124846080 512-byte logical blocks: (63.9 GB/59.5 GiB) [ 878.284754] sd 12:0:0:0: [sdb] Write Protect is off [ 878.284766] sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 878.286794] sd 12:0:0:0: [sdb] No Caching mode page found [ 878.286805] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 878.295790] sdb: sdb1 sdb2 [ 878.302110] sd 12:0:0:0: [sdb] Attached SCSI removable disk dmesg-15284698.txt (55,316 bytes) dmesg-15285350.txt (52,595 bytes) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-38-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=71a69993-ede1-4550-8cf2-aaddc4395a75 ro quiet splash acpi_osi=Linux vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000096e3efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000096e3f000-0x0000000096ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire 5750G/JE50_HR, BIOS V1.11 05/24/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 097000000 mask FFF000000 uncachable [ 0.000000] 3 base 098000000 mask FF8000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x96e3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x96dfffff] page 2M [ 0.000000] [mem 0x96e00000-0x96e3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x96fff000-0x96ffffff] [ 0.000000] [mem 0x96fff000-0x96ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x348c8000-0x3645bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x0000000096FFE120 00007C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000096FFC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x0000000096FF0000 008F13 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x0000000096F6D000 000040 [ 0.000000] ACPI: ASF! 0x0000000096FFD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x0000000096FFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x0000000096FFA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x0000000096FF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x0000000096FEF000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FEE000 000BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x0000000096FEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x0000000096FE9000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FE8000 000780 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x0000000096FE7000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf5000-0x25fdf9fff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257600000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x96e3efff] [ 0.000000] node 0: [mem 0x96fff000-0x96ffffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2059228 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9593 pages used for memmap [ 0.000000] DMA32 zone: 613952 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x97a00000-0x9f9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x96e3f000-0x96ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96ebf000-0x96fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0x96fbf000-0x96ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0x97000000-0x9f9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88025fa00000 s81408 r8192 d20992 u262144 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u262144 alloc=12097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2026895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=UUID=71a69993-ede1-4550-8cf2-aaddc4395a75 ro quiet splash acpi_osi=Linux vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7995652K/8236912K available (7626K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 241260K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33030144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.771 MHz processor [ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.54 BogoMIPS (lpj=9179084) [ 0.000039] pid_max: default: 32768 minimum: 301 [ 0.000046] ACPI: Core revision 20140424 [ 0.006470] ACPI: All ACPI Tables successfully acquired [ 0.037292] Security Framework initialized [ 0.037310] AppArmor: AppArmor initialized [ 0.037311] Yama: becoming mindful. [ 0.037880] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.039602] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.040343] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.040355] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.040576] Initializing cgroup subsys memory [ 0.040600] Initializing cgroup subsys devices [ 0.040606] Initializing cgroup subsys freezer [ 0.040608] Initializing cgroup subsys net_cls [ 0.040612] Initializing cgroup subsys blkio [ 0.040616] Initializing cgroup subsys perf_event [ 0.040617] Initializing cgroup subsys net_prio [ 0.040624] Initializing cgroup subsys hugetlb [ 0.040645] CPU: Physical Processor ID: 0 [ 0.040647] CPU: Processor Core ID: 0 [ 0.040651] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.040651] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.040654] mce: CPU supports 7 MCE banks [ 0.040665] CPU0: Thermal monitoring enabled (TM1) [ 0.040675] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.040675] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.040675] tlb_flushall_shift: 6 [ 0.040816] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000) [ 0.042305] ftrace: allocating 29244 entries in 115 pages [ 0.057959] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.097624] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07) [ 0.097634] TSC deadline timer enabled [ 0.097660] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.097681] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.097683] ... version: 3 [ 0.097684] ... bit width: 48 [ 0.097685] ... generic registers: 4 [ 0.097686] ... value mask: 0000ffffffffffff [ 0.097687] ... max period: 0000ffffffffffff [ 0.097688] ... fixed-purpose events: 3 [ 0.097689] ... event mask: 000000070000000f [ 0.099511] x86: Booting SMP configuration: [ 0.099514] .... node #0, CPUs: #1 [ 0.112628] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.112715] #2 #3 [ 0.138981] x86: Booted up 1 node, 4 CPUs [ 0.138984] smpboot: Total of 4 processors activated (18358.16 BogoMIPS) [ 0.142285] devtmpfs: initialized [ 0.146649] evm: security.selinux [ 0.146651] evm: security.SMACK64 [ 0.146652] evm: security.SMACK64EXEC [ 0.146653] evm: security.SMACK64TRANSMUTE [ 0.146654] evm: security.SMACK64MMAP [ 0.146655] evm: security.ima [ 0.146656] evm: security.capability [ 0.146714] PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes) [ 0.147646] pinctrl core: initialized pinctrl subsystem [ 0.147719] regulator-dummy: no parameters [ 0.147763] RTC time: 20:30:58, date: 03/04/16 [ 0.147816] NET: Registered protocol family 16 [ 0.147981] cpuidle: using governor ladder [ 0.147984] cpuidle: using governor menu [ 0.148041] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.148043] ACPI: bus type PCI registered [ 0.148044] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.148123] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.148125] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.148444] PCI: Using configuration type 1 for base access [ 0.151485] ACPI: Added _OSI(Module Device) [ 0.151487] ACPI: Added _OSI(Processor Device) [ 0.151489] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.151490] ACPI: Added _OSI(Processor Aggregator Device) [ 0.151491] ACPI: Added _OSI(Linux) [ 0.153947] ACPI: Executed 1 blocks of module-level executable AML code [ 0.163122] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.163413] ACPI: Dynamic OEM Table Load: [ 0.163422] ACPI: SSDT 0xFFFF880253D71000 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.167270] ACPI: Dynamic OEM Table Load: [ 0.167276] ACPI: SSDT 0xFFFF880253D49C00 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.171142] ACPI: Dynamic OEM Table Load: [ 0.171148] ACPI: SSDT 0xFFFF880253C93600 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.187104] ACPI: Interpreter enabled [ 0.187125] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.187130] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.187144] ACPI: (supports S0 S3 S4 S5) [ 0.187145] ACPI: Using IOAPIC for interrupt routing [ 0.187170] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.286258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.286264] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.286295] \_SB_.PCI0:_OSC invalid UUID [ 0.286296] _OSC request data:1 1f 0 [ 0.286300] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.286903] PCI host bridge to bus 0000:00 [ 0.286906] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.286908] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.286910] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.286912] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.286914] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.286921] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.287008] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.287019] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit] [ 0.287030] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.287035] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.287159] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.287194] pci 0000:00:16.0: reg 0x10: [mem 0xb0604000-0xb060400f 64bit] [ 0.287309] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.287413] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.287780] pci 0000:00:1a.0: reg 0x10: [mem 0xb060a000-0xb060a3ff] [ 0.289876] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.289971] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.289999] pci 0000:00:1b.0: reg 0x10: [mem 0xb0600000-0xb0603fff 64bit] [ 0.290135] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.290185] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.290231] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.290365] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.290416] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.290459] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.290593] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.290700] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.291061] pci 0000:00:1d.0: reg 0x10: [mem 0xb0609000-0xb06093ff] [ 0.293138] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.293199] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.293247] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.293472] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.293507] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.293520] pci 0000:00:1f.2: reg 0x14: [io 0x209c-0x209f] [ 0.293533] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.293547] pci 0000:00:1f.2: reg 0x1c: [io 0x2098-0x209b] [ 0.293560] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.293574] pci 0000:00:1f.2: reg 0x24: [mem 0xb0608000-0xb06087ff] [ 0.293661] pci 0000:00:1f.2: PME# supported from D3hot [ 0.293742] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.293767] pci 0000:00:1f.3: reg 0x10: [mem 0xb0606000-0xb06060ff 64bit] [ 0.293805] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.294049] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.294090] pci 0000:02:00.0: reg 0x10: [mem 0xb0430000-0xb043ffff 64bit pref] [ 0.294119] pci 0000:02:00.0: reg 0x18: [mem 0xb0440000-0xb044ffff 64bit pref] [ 0.294174] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.294319] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.294369] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.294459] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.294500] pci 0000:02:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit pref] [ 0.294710] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.294835] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000 [ 0.294875] pci 0000:02:00.2: reg 0x10: [mem 0xb0410000-0xb041ffff 64bit pref] [ 0.295087] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold [ 0.295211] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000 [ 0.295252] pci 0000:02:00.3: reg 0x10: [mem 0xb0420000-0xb042ffff 64bit pref] [ 0.295464] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.303161] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.303186] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.303314] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000 [ 0.303353] pci 0000:03:00.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit] [ 0.303545] pci 0000:03:00.0: supports D1 [ 0.303547] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.303587] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.311099] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.311114] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.359377] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.359428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) 7 [ 0.359476] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.359524] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) 7 [ 0.359571] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.359619] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.359666] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.359715] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.359804] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.359832] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.359925] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.359927] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.359930] vgaarb: loaded [ 0.359931] vgaarb: bridge control possible 0000:00:02.0 [ 0.360179] SCSI subsystem initialized [ 0.360227] libata version 3.00 loaded. [ 0.360253] ACPI: bus type USB registered [ 0.360272] usbcore: registered new interface driver usbfs [ 0.360281] usbcore: registered new interface driver hub [ 0.360304] usbcore: registered new device driver usb [ 0.360437] PCI: Using ACPI for IRQ routing [ 0.373947] PCI: pci_cache_line_size set to 64 bytes [ 0.374071] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.374073] e820: reserve RAM buffer [mem 0x96e3f000-0x97ffffff] [ 0.374074] e820: reserve RAM buffer [mem 0x97000000-0x97ffffff] [ 0.374076] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.374190] NetLabel: Initializing [ 0.374191] NetLabel: domain hash size = 128 [ 0.374192] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.374204] NetLabel: unlabeled traffic allowed by default [ 0.374276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.374281] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.376325] Switched to clocksource hpet [ 0.381852] AppArmor: AppArmor Filesystem Enabled [ 0.381888] pnp: PnP ACPI init [ 0.381902] ACPI: bus type PNP registered [ 0.382015] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.382018] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.382019] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.382021] system 00:00: [io 0xffff] has been reserved [ 0.382023] system 00:00: [io 0xffff] has been reserved [ 0.382025] system 00:00: [io 0x0400-0x047f] could not be reserved [ 0.382027] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.382029] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.382033] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.382064] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.382107] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.382109] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.382147] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.382189] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.428519] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.428522] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.428524] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.428526] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.428528] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.428529] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.428531] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.428533] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.428535] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.428537] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.428540] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.428723] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.428725] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved [ 0.428728] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.428742] pnp: PnP ACPI: found 7 devices [ 0.428743] ACPI: bus type PNP unregistered [ 0.435269] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window [ 0.435301] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff] [ 0.435305] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb007ff pref] [ 0.435307] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.435314] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff] [ 0.435319] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.435328] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.435335] pci 0000:00:1c.1: bridge window [mem 0xb0500000-0xb05fffff] [ 0.435348] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.435349] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.435351] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.435353] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.435355] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fbfffff] [ 0.435357] pci_bus 0000:02: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref] [ 0.435359] pci_bus 0000:03: resource 1 [mem 0xb0500000-0xb05fffff] [ 0.435387] NET: Registered protocol family 2 [ 0.435593] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.435756] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.435885] TCP: Hash tables configured (established 65536 bind 65536) [ 0.435908] TCP: reno registered [ 0.435919] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.435951] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.436019] NET: Registered protocol family 1 [ 0.436036] pci 0000:00:02.0: Video device with shadowed ROM [ 0.468491] PCI: CLS 64 bytes, default 64 [ 0.468553] Trying to unpack rootfs image as initramfs... [ 0.940837] Freeing initrd memory: 28240K (ffff8800348c8000 - ffff88003645c000) [ 0.940869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.940872] software IO TLB [mem 0x92e3f000-0x96e3f000] (64MB) mapped at [ffff880092e3f000-ffff880096e3efff] [ 0.940929] Simple Boot Flag at 0x44 set to 0x1 [ 0.941096] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.941142] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17 [ 0.941149] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17 [ 0.941159] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17 [ 0.941167] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17 [ 0.941222] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 0.941245] Scanning for low memory corruption every 60 seconds [ 0.941604] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.941627] Initialise system trusted keyring [ 0.941656] audit: initializing netlink subsys (disabled) [ 0.941668] audit: type=2000 audit(1457123458.908:1): initialized [ 0.941990] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.943528] zpool: loaded [ 0.943530] zbud: loaded [ 0.943697] VFS: Disk quotas dquot_6.5.2 [ 0.943735] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.944233] fuse init (API version 7.23) [ 0.944321] msgmni has been set to 15671 [ 0.944382] Key type big_key registered [ 0.944791] Key type asymmetric registered [ 0.944793] Asymmetric key parser 'x509' registered [ 0.944831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.944877] io scheduler noop registered [ 0.944880] io scheduler deadline registered (default) [ 0.944929] io scheduler cfq registered [ 0.945324] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.945341] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.945390] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.945391] vesafb: scrolling: redraw [ 0.945393] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.945399] mtrr: no more MTRRs available [ 0.945412] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k [ 0.945488] Console: switching to colour frame buffer device 128x48 [ 0.945502] fb0: VESA VGA frame buffer device [ 0.945526] intel_idle: MWAIT substates: 0x21120 [ 0.945527] intel_idle: v0.4 model 0x2A [ 0.945528] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.359843] ACPI: AC Adapter [ACAD] (on-line) [ 1.359922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0 [ 1.359926] ACPI: Power Button [PWRB] [ 1.359965] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1 [ 1.359981] ACPI: Lid Switch [LID0] [ 1.360021] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2 [ 1.360023] ACPI: Sleep Button [SLPB] [ 1.360064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.360066] ACPI: Power Button [PWRF] [ 1.360348] GHES: HEST is not enabled! [ 1.360455] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.695721] ACPI: Battery Slot [BAT0] (battery present) [ 1.695832] Linux agpgart interface v0.103 [ 1.697901] brd: module loaded [ 1.698543] loop: module loaded [ 1.698767] libphy: Fixed MDIO Bus: probed [ 1.698772] tun: Universal TUN/TAP device driver, 1.6 [ 1.698773] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.698828] PPP generic driver version 2.4.2 [ 1.698874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.698882] ehci-pci: EHCI PCI platform driver [ 1.698995] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.699002] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.699019] ehci-pci 0000:00:1a.0: debug port 2 [ 1.702933] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.702949] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb060a000 [ 1.711659] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.711698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.711700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.711701] usb usb1: Product: EHCI Host Controller [ 1.711703] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 1.711704] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.711856] hub 1-0:1.0: USB hub found [ 1.711863] hub 1-0:1.0: 2 ports detected [ 1.712054] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.712059] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.712075] ehci-pci 0000:00:1d.0: debug port 2 [ 1.715988] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.716002] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0609000 [ 1.727743] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.727832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.727835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.727837] usb usb2: Product: EHCI Host Controller [ 1.727838] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 1.727840] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.728048] hub 2-0:1.0: USB hub found [ 1.728056] hub 2-0:1.0: 2 ports detected [ 1.728174] ehci-platform: EHCI generic platform driver [ 1.728187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.728192] ohci-pci: OHCI PCI platform driver [ 1.728204] ohci-platform: OHCI generic platform driver [ 1.728211] uhci_hcd: USB Universal Host Controller Interface driver [ 1.728276] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.772138] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.772143] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.772461] mousedev: PS/2 mouse device common for all mice [ 1.772923] rtc_cmos 00:01: RTC can wake from S4 [ 1.773190] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.773227] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.773301] device-mapper: uevent: version 1.0.3 [ 1.773467] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected] [ 1.773484] Intel P-state driver initializing. [ 1.773504] Intel pstate controlling: cpu 0 [ 1.773531] Intel pstate controlling: cpu 1 [ 1.773552] Intel pstate controlling: cpu 2 [ 1.773586] Intel pstate controlling: cpu 3 [ 1.773619] Consider also installing thermald for improved thermal control. [ 1.773625] ledtrig-cpu: registered to indicate activity on CPUs [ 1.773714] TCP: cubic registered [ 1.773814] NET: Registered protocol family 10 [ 1.774158] NET: Registered protocol family 17 [ 1.774194] Key type dns_resolver registered [ 1.775721] Loading compiled-in X.509 certificates [ 1.778486] Loaded X.509 cert 'Magrathea: Glacier signing key: c284edaccf0b473652c34d23bec356944236e63b' [ 1.778536] registered taskstats version 1 [ 1.780754] Key type trusted registered [ 1.783528] Key type encrypted registered [ 1.783534] AppArmor: AppArmor sha1 policy hashing enabled [ 1.783536] ima: No TPM chip found, activating TPM-bypass! [ 1.783549] evm: HMAC attrs: 0x1 [ 1.784027] Magic number: 8:879:547 [ 1.784040] tty ttyS23: hash matches [ 1.784127] rtc_cmos 00:01: setting system clock to 2016-03-04 20:31:00 UTC (1457123460) [ 1.784202] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.784203] EDD information not available. [ 1.784267] PM: Hibernation image not present or could not be loaded. [ 1.785546] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000) [ 1.785548] Write protecting the kernel read-only data: 12288k [ 1.786820] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000) [ 1.787922] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000) [ 1.797812] systemd-udevd[126]: starting version 204 [ 1.821663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.939537] tsc: Refined TSC clocksource calibration: 2294.787 MHz [ 2.023693] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.156054] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.156064] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.156563] hub 1-1:1.0: USB hub found [ 2.156699] hub 1-1:1.0: 6 ports detected [ 2.223568] sdhci: Secure Digital Host Controller Interface driver [ 2.223571] sdhci: Copyright(c) Pierre Ossman [ 2.225742] ahci 0000:00:1f.2: version 3.0 [ 2.225868] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 2.225891] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.225915] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 2.225917] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 2.226364] pps_core: LinuxPPS API ver. 1 registered [ 2.226367] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 2.229694] PTP clock support registered [ 2.234790] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 2.234977] mmc0: no vqmmc regulator found [ 2.234979] mmc0: no vmmc regulator found [ 2.236909] [drm] Initialized drm 1.1.0 20060810 [ 2.238401] scsi0 : ahci [ 2.239506] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 2.239666] tg3.c:v3.137 (May 11, 2014) [ 2.243433] scsi1 : ahci [ 2.243565] scsi2 : ahci [ 2.243668] scsi3 : ahci [ 2.243771] scsi4 : ahci [ 2.243869] scsi5 : ahci [ 2.243931] ata1: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608100 irq 40 [ 2.243934] ata2: SATA max UDMA/133 abar m2048@0xb0608000 port 0xb0608180 irq 40 [ 2.243936] ata3: DUMMY [ 2.243938] ata4: DUMMY [ 2.243939] ata5: DUMMY [ 2.243941] ata6: DUMMY [ 2.263199] [drm] Memory usable by graphics device = 2048M [ 2.263203] checking generic (a0000000 300000) vs hw (a0000000 10000000) [ 2.263204] fb: switching to inteldrmfb from VESA VGA [ 2.263221] Console: switching to colour dummy device 80x25 [ 2.263284] [drm] Replacing VGA console driver [ 2.267428] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.280487] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:70:f4:ac:a5:56 [ 2.280490] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.280492] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.280494] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.287407] i915 0000:00:02.0: irq 41 for MSI/MSI-X [ 2.287416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.287417] [drm] Driver supports precise vblank timestamp query. [ 2.287489] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.311618] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 2.311620] [drm] This can cause pipe underruns and display issues. [ 2.311621] [drm] Please upgrade your BIOS to fix this. [ 2.329011] fbcon: inteldrmfb (fb0) is primary device [ 2.329032] Console: switching to colour frame buffer device 170x48 [ 2.329050] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.329051] i915 0000:00:02.0: registered panic notifier [ 2.331884] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.399927] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.399938] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.400384] hub 2-1:1.0: USB hub found [ 2.400593] hub 2-1:1.0: 6 ports detected [ 2.471554] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 2.567332] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.581694] ata1.00: ATA-8: ADATA SSD S511 120GB, 5.2.5, max UDMA/133 [ 2.581704] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.591769] ata1.00: configured for UDMA/133 [ 2.592051] scsi 0:0:0:0: Direct-Access ATA ADATA SSD S511 1 5 PQ: 0 ANSI: 5 [ 2.592403] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.592418] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.592521] sd 0:0:0:0: [sda] Write Protect is off [ 2.592523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.592595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.593731] sda: sda1 sda2 < sda5 > [ 2.594196] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.643220] acpi device:2e: registered as cooling_device4 [ 2.643338] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.643414] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.726593] usb 1-1.3: New USB device found, idVendor=064e, idProduct=c21c [ 2.726604] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.726610] usb 1-1.3: Product: 1.3M HD WebCam [ 2.726615] usb 1-1.3: Manufacturer: SuYin [ 2.726619] usb 1-1.3: SerialNumber: HF1316-P80A-SS06-VA-R01.01.00 [ 2.911158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.914487] ata2.00: ATAPI: HL-DT-ST DVDRAM GT70N, YP10, max UDMA/133 [ 2.917319] ata2.00: configured for UDMA/133 [ 2.930784] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT70N YP10 PQ: 0 ANSI: 5 [ 2.939364] Switched to clocksource tsc [ 2.951210] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.951215] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.951357] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.951416] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.638147] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01) [ 3.681266] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a. [ 3.846946] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.903214] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 3.930120] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.005549] random: init urandom read with 62 bits of entropy available [ 4.110913] Adding 8235004k swap on /dev/sda5. Priority:-1 extents:1 across:8235004k SSFS [ 4.197187] systemd-udevd[393]: starting version 204 [ 4.233345] lp: driver loaded but no devices found [ 4.237233] wmi: Mapper loaded [ 4.238850] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.247264] ppdev: user-space parallel port driver [ 4.250807] acer_wmi: Acer Laptop ACPI-WMI Extras [ 4.250821] acer_wmi: Function bitmap for Communication Button: 0x1 [ 4.250825] acer_wmi: Brightness must be controlled by generic video driver [ 4.250827] acer_wmi: Disabling ACPI video driver [ 4.251146] input: Acer WMI hotkeys as /devices/virtual/input/input8 [ 4.252435] input: Acer BMA150 accelerometer as /devices/virtual/input/input9 [ 4.285153] device-mapper: multipath: version 1.7.0 loaded [ 4.478983] Bluetooth: Core ver 2.19 [ 4.478999] NET: Registered protocol family 31 [ 4.479000] Bluetooth: HCI device and connection manager initialized [ 4.479008] Bluetooth: HCI socket layer initialized [ 4.479011] Bluetooth: L2CAP socket layer initialized [ 4.479020] Bluetooth: SCO socket layer initialized [ 4.485056] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.485060] Bluetooth: BNEP filters: protocol multicast [ 4.485067] Bluetooth: BNEP socket layer initialized [ 4.485662] Bluetooth: RFCOMM TTY layer initialized [ 4.485669] Bluetooth: RFCOMM socket layer initialized [ 4.485674] Bluetooth: RFCOMM ver 1.11 [ 4.492419] init: cups main process (533) killed by HUP signal [ 4.492428] init: cups main process ended, respawning [ 4.665605] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.680171] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X [ 4.693947] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258) [ 4.693956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.693960] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 4.693965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.693967] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 4.693972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.693974] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258) [ 4.693978] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.693980] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.698711] cfg80211: Calling CRDA to update world regulatory domain [ 4.764359] random: nonblocking pool is initialized [ 4.796707] intel_rapl: Found RAPL domain package [ 4.796711] intel_rapl: Found RAPL domain core [ 4.796712] intel_rapl: Found RAPL domain uncore [ 4.826808] ath: phy0: ASPM enabled: 0x42 [ 4.826813] ath: EEPROM regdomain: 0x65 [ 4.826815] ath: EEPROM indicates we should expect a direct regpair map [ 4.826817] ath: Country alpha2 being used: 00 [ 4.826819] ath: Regpair used: 0x65 [ 4.854402] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.854793] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010f40000, irq=17 [ 4.861390] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 4.865231] media: Linux media interface: v0.10 [ 4.874960] Linux video capture interface: v2.00 [ 4.886532] sound hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 4.887130] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.887134] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.887136] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.887138] sound hdaudioC0D0: mono: mono_out=0x0 [ 4.887140] sound hdaudioC0D0: inputs: [ 4.887143] sound hdaudioC0D0: Internal Mic=0x1b [ 4.887145] sound hdaudioC0D0: Mic=0x18 [ 4.891067] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:c21c) [ 4.909019] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13 [ 4.909744] usbcore: registered new interface driver uvcvideo [ 4.909747] USB Video Class driver (1.1.1) [ 4.910448] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.910687] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.910838] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.931646] cfg80211: World regulatory domain updated: [ 4.931651] cfg80211: DFS Master region: unset [ 4.931653] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.931656] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4.931659] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4.931661] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4.931663] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 4.931665] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 5.000896] init: failsafe main process (736) killed by TERM signal [ 5.087305] init: samba-ad-dc main process (777) terminated with status 1 [ 5.265443] init: nvidia-prime main process (1035) terminated with status 127 [ 5.523654] init: plymouth-upstart-bridge main process ended, respawning [ 5.531465] init: plymouth-upstart-bridge main process (1255) terminated with status 1 [ 5.531479] init: plymouth-upstart-bridge main process ended, respawning [ 5.640460] tg3 0000:02:00.0: irq 44 for MSI/MSI-X [ 5.640466] tg3 0000:02:00.0: irq 45 for MSI/MSI-X [ 5.640470] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 5.640474] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 5.640477] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 5.803592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.824500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.139139] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 6.144732] vboxdrv: Found 4 processor cores [ 6.165548] vboxdrv: TSC mode is Invariant, tentative frequency 2294786989 Hz [ 6.165552] vboxdrv: Successfully loaded version 5.0.2 (interface 0x00230003) [ 6.368931] VBoxNetFlt: Successfully started. [ 6.370895] VBoxNetAdp: Successfully started. [ 6.372611] VBoxPciLinuxInit [ 6.378830] vboxpci: IOMMU not found (not registered) [ 6.486580] init: plymouth-stop pre-start process (1636) terminated with status 1 [ 9.204809] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 9.204813] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [ 9.204815] tg3 0000:02:00.0 eth0: EEE is disabled [ 9.204996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1187.538696] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 1187.693378] usb 2-1.1: New USB device found, idVendor=18a5, idProduct=024b [ 1187.693389] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1187.693394] usb 2-1.1: Product: SSD [ 1187.693398] usb 2-1.1: Manufacturer: Verbatim [ 1187.693402] usb 2-1.1: SerialNumber: 511140305177C000B1 [ 1187.733958] usbcore: registered new interface driver usb-storage [ 1187.738843] scsi6 : uas [ 1187.739058] usbcore: registered new interface driver uas [ 1187.740365] scsi 6:0:0:0: Direct-Access Verbatim USB External SSD 0 PQ: 0 ANSI: 6 [ 1187.742132] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1187.742668] sd 6:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1187.744203] sd 6:0:0:0: [sdb] Write Protect is off [ 1187.744208] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1187.744777] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1187.749342] sdb: sdb1 sdb2 [ 1187.752756] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1187.971171] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1188.071781] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 1192.508269] sdb2: WRITE SAME failed. Manually zeroing. dmesg-15285350.txt (52,595 bytes)

rhertzog 2016-03-07 08:54 administrator ~0004821	Have you tried with Linux 4.4 which is now available in kali-rolling? Because it seems to have the UAS module: $ grep UAS /boot/config-4.4.0-1-amd64 CONFIG_USB_UAS=m

L 2016-03-08 19:49 reporter ~0004829 Last edited: 2016-03-08 19:53	no I look for the Linux 4.4. I have try ist with kali 2016.1 release

rhertzog 2016-03-22 16:49 administrator ~0005007	Can you report back on whether Linux 4.4 works with your USB SSD? You can try the latest mini.iso to see if your disk is recognized during installation: http://cdimage.kali.org/kali-2016.1/kali-linux-mini-2016.1b-amd64.iso

rhertzog 2016-04-07 09:34 administrator ~0005097	Closing ticket as the bug reporter is not responding.

Date Modified	Username	Field	Change
2016-03-04 21:14	L	New Issue
2016-03-04 21:35	L	File Added: dmesg-15284698.txt
2016-03-04 21:35	L	File Added: dmesg-15285350.txt
2016-03-07 08:54	rhertzog	Note Added: 0004821
2016-03-07 08:54	rhertzog	Assigned To	=> rhertzog
2016-03-07 08:54	rhertzog	Status	new => feedback
2016-03-08 19:49	L	Note Added: 0004829
2016-03-08 19:49	L	Status	feedback => assigned
2016-03-08 19:53	L	Note Edited: 0004829
2016-03-22 16:49	rhertzog	Note Added: 0005007
2016-03-22 16:49	rhertzog	Status	assigned => feedback
2016-04-07 09:34	rhertzog	Note Added: 0005097
2016-04-07 09:34	rhertzog	Status	feedback => closed
2016-04-07 09:34	rhertzog	Resolution	open => unable to reproduce