View Issue Details

IDProjectCategoryView StatusLast Update
0007447Kali Linux[All Projects] General Bugpublic2021-11-17 13:12
ReporterVT Assigned To 
PrioritynormalSeveritymajorReproducibilityalways
Status newResolutionopen 
Product Version2021.3 
Target VersionFixed in Version 
Summary0007447: Bug in kernel version linux-image-5.14.0-kali4-amd64
DescriptionMy issue is similar to this one https://bugs.kali.org/view.php?id=7445 but occurs on desktop PC, new kernel update breaks amdgpu, I cannot operate with SMplayer or any web-browser it just freezes... and booting up a system takes a couple of minutes.
Steps To ReproduceI tried to purge and reinstall the kernel but nothing helps, only reverting to previous kernel version resolves the problem.
Additional Informationhere's the output from `dmesg`

`[ 7.176348] r8169 0000:03:00.0 eth0: Link is Down
[ 7.696779] loop20: detected capacity change from 0 to 8
[ 8.799010] r8169 0000:03:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.799030] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.137277] vboxdrv: loading out-of-tree module taints kernel.
[ 9.145641] vboxdrv: Found 8 processor cores
[ 9.164197] vboxdrv: TSC mode is Invariant, tentative frequency 3692813507 Hz
[ 9.164201] vboxdrv: Successfully loaded version 6.1.28_Debian r147628 (interface 0x00320000)
[ 9.171672] VBoxNetFlt: Successfully started.
[ 9.178432] VBoxNetAdp: Successfully started.
[ 9.280335] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 9.670326] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 9.670328] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 25.849227] loop20: detected capacity change from 0 to 126632
[ 28.313889] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 48.322440] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 68.490447] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 88.502445] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 170.518442] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 190.650037] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 201.170428] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 202.270420] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 211.270027] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 221.186354] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 222.310426] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 231.294638] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 241.510484] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 242.614431] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 261.526051] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 262.638044] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 282.806435] amdgpu 0000:08:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
[ 302.826439] amdgpu 0000:08:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
[ 302.827083] BUG: Bad page map in process mullvad-gu:cs0 pte:00000001 pmd:14bde0067
[ 302.827088] page:00000000277ac75e refcount:1 mapcount:-1 mapping:0000000000000000 index:0x0 pfn:0x0
[ 302.827094] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 302.827102] raw: 0007ffffc0001000 fffff87540000008 fffff87540000008 0000000000000000
[ 302.827105] raw: 0000000000000000 0000000000000000 00000001fffffffe 0000000000000000
[ 302.827107] page dumped because: bad pte
[ 302.827108] addr:000055aa31200000 vm_flags:08000875 anon_vma:0000000000000000 mapping:ffff893f76855e98 index:4e44
[ 302.827113] file:mullvad-gui fault:ext4_filemap_fault [ext4] mmap:ext4_file_mmap [ext4] readpage:ext4_readpage [ext4]
[ 302.827263] CPU: 4 PID: 2535 Comm: mullvad-gu:cs0 Tainted: G OE 5.14.0-kali4-amd64 0000001 Debian 5.14.16-1kali1
[ 302.827268] Hardware name: System manufacturer System Product Name/PRIME B450-PLUS, BIOS 1607 06/17/2019
[ 302.827271] Call Trace:
[ 302.827276] dump_stack_lvl+0x46/0x5a
[ 302.827285] print_bad_pte.cold+0x6b/0xc6
[ 302.827291] ? __mod_lruvec_page_state+0x7f/0xa0
[ 302.827299] unmap_page_range+0x749/0xc80
[ 302.827308] unmap_vmas+0x78/0xf0
[ 302.827314] exit_mmap+0x9c/0x1f0
[ 302.827320] mmput+0x56/0x130
[ 302.827325] do_exit+0x2fa/0xa90
[ 302.827330] do_group_exit+0x33/0xa0
[ 302.827336] get_signal+0x170/0x8d0
[ 302.827341] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[ 302.827634] arch_do_signal_or_restart+0xf0/0x7a0
[ 302.827641] ? ktime_get_mono_fast_ns+0x4e/0x90
[ 302.827646] exit_to_user_mode_prepare+0x119/0x180
[ 302.827651] syscall_exit_to_user_mode+0x23/0x40
[ 302.827656] do_syscall_64+0x48/0xc0
[ 302.827660] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 302.827666] RIP: 0033:0x7f7471f3f957
[ 302.827670] Code: Unable to access opcode bytes at RIP 0x7f7471f3f92d.
[ 302.827672] RSP: 002b:00007f7462b7d3c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 302.827677] RAX: 0000000000000000 RBX: 00007f7462b7d430 RCX: 00007f7471f3f957
[ 302.827679] RDX: 00007f7462b7d430 RSI: 00000000c0186444 RDI: 0000000000000017
[ 302.827681] RBP: 00000000c0186444 R08: 00007f7462b7d560 R09: 00007f7462b7d508
[ 302.827684] R10: 0000396e000ea300 R11: 0000000000000246 R12: 0000396e001c0000
[ 302.827686] R13: 0000000000000017 R14: 00000000fffffffd R15: 0000396e001ac090
[ 302.827690] Disabling lock debugging due to kernel taint
[ 302.832961] BUG: Bad rss-counter state mm:00000000635aa6d8 type:MM_FILEPAGES val:-1`

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2021-11-17 13:12 VT New Issue