System is
DISTRIB_ID=Kali
DISTRIB_RELEASE=kali-rolling
DISTRIB_CODENAME=kali-rolling
DISTRIB_DESCRIPTION="Kali GNU/Linux Rolling"
PRETTY_NAME="Kali GNU/Linux Rolling"
NAME="Kali GNU/Linux"
ID=kali
VERSION="2018.2"
VERSION_ID="2018.2"
ID_LIKE=debian

Kernel version 4.15.0-kali2-amd64
Using NVIDIA-CURRENT (bumblebee + CUDA). If I recall correctly, this issue also happened with Nouveau.

this is my demsg:

0.000000] Linux version 4.15.0-kali2-amd64 ([email protected]) (gcc version 7.3.0 (Debian 7.3.0-11)) 0000001 SMP Debian 4.15.11-1kali1 (2018-03-21)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-kali2-amd64 root=UUID=ebd9b2db-21eb-4c32-9ecb-dd36d3281f86 ro initrd=/install/gtk/initrd.gz quiet nomodeset
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c85dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c85db000-0x00000000c8a6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c8a6b000-0x00000000c8bf6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8bf7000-0x00000000c910dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c910e000-0x00000000c97ccfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c97cd000-0x00000000c9876fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000c9877000-0x00000000c9877fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9878000-0x00000000c98bafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c98bb000-0x00000000c9cc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9cc2000-0x00000000c9ff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc8c7f000 ACPI 2.0=0xc8c7f000 SMBIOS=0xf04c0 MPS=0xfd450
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. K75VJ/K75VJ, BIOS 230 01/24/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 7 base 22FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ (ptrval)]
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] BRK [0x227820000, 0x227820fff] PGTABLE
[ 0.000000] BRK [0x227821000, 0x227821fff] PGTABLE
[ 0.000000] BRK [0x227822000, 0x227822fff] PGTABLE
[ 0.000000] BRK [0x227823000, 0x227823fff] PGTABLE
[ 0.000000] BRK [0x227824000, 0x227824fff] PGTABLE
[ 0.000000] BRK [0x227825000, 0x227825fff] PGTABLE
[ 0.000000] BRK [0x227826000, 0x227826fff] PGTABLE
[ 0.000000] BRK [0x227827000, 0x227827fff] PGTABLE
[ 0.000000] BRK [0x227828000, 0x227828fff] PGTABLE
[ 0.000000] BRK [0x227829000, 0x227829fff] PGTABLE
[ 0.000000] BRK [0x22782a000, 0x22782afff] PGTABLE
[ 0.000000] BRK [0x22782b000, 0x22782bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34092000-0x36040fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C8C7F000 000024 (v02 ASUS)
[ 0.000000] ACPI: XSDT 0x00000000C8C7F080 000084 (v01 ASUS Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C8C8E290 00010C (v05 ASUS Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C8C7F1A0 00F0EE (v02 ASUS Notebook 00000022 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000C9100080 000040
[ 0.000000] ACPI: APIC 0x00000000C8C8E3A0 000092 (v03 ASUS Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C8C8E438 000044 (v01 ASUS Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000C8C8E480 00003C (v01 ASUS Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C8C8E4C0 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 0x00000000C8C8EBB0 000038 (v01 ASUS Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C8C8EBE8 000342 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C8C8EF30 0008E4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8C8F818 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000C8C902B0 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C8C90368 000776 (v01 SgRef SgTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C8C90AE0 0013A8 (v01 OptRef OptTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22fdf5000-0x22fdf9fff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000c85dafff]
[ 0.000000] node 0: [mem 0x00000000c8a6b000-0x00000000c8bf6fff]
[ 0.000000] node 0: [mem 0x00000000c9877000-0x00000000c9877fff]
[ 0.000000] node 0: [mem 0x00000000c98bb000-0x00000000c9cc1fff]
[ 0.000000] node 0: [mem 0x00000000c9ff4000-0x00000000c9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
[ 0.000000] On node 0 totalpages: 2066200
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12774 pages used for memmap
[ 0.000000] DMA32 zone: 817530 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at 0x00000000cb200000-0x00000000cf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc85db000-0xc8a6afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8bf7000-0xc910dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc910e000-0xc97ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc97cd000-0xc9876fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9878000-0xc98bafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9cc2000-0xc9ff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142040 r8192 d29992 u262144
[ 0.000000] pcpu-alloc: s142040 r8192 d29992 u262144 alloc=12097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2033888
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-kali2-amd64 root=UUID=ebd9b2db-21eb-4c32-9ecb-dd36d3281f86 ro initrd=/install/gtk/initrd.gz quiet nomodeset
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7820160K/8264800K available (10252K kernel code, 1165K rwdata, 3084K rodata, 1516K init, 692K bss, 444640K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29537 entries in 116 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 36
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.000000] DMAR: RMRR base: 0x000000c89e2000 end: 0x000000c89fefff
[ 0.000000] DMAR: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2294.989 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.97 BogoMIPS (lpj=9179956)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.028029] Security Framework initialized
[ 0.028030] Yama: disabled by default; enable with sysctl kernel.yama.
[ 0.028044] AppArmor: AppArmor initialized
[ 0.029289] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.029905] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.029933] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.029953] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030160] CPU: Physical Processor ID: 0
[ 0.030161] CPU: Processor Core ID: 0
[ 0.030167] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.030167] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.030171] mce: CPU supports 9 MCE banks
[ 0.030180] CPU0: Thermal monitoring enabled (TM1)
[ 0.030192] process: using mwait in idle threads
[ 0.030195] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.030195] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.030197] Spectre V2 : Mitigation: Full generic retpoline
[ 0.030305] Freeing SMP alternatives memory: 28K
[ 0.041555] TSC deadline timer enabled
[ 0.041559] smpboot: CPU0: Genuine Intel(R) CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x4)
[ 0.041628] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.041650] ... version: 3
[ 0.041651] ... bit width: 48
[ 0.041651] ... generic registers: 4
[ 0.041652] ... value mask: 0000ffffffffffff
[ 0.041652] ... max period: 00007fffffffffff
[ 0.041653] ... fixed-purpose events: 3
[ 0.041654] ... event mask: 000000070000000f
[ 0.041689] Hierarchical SRCU implementation.
[ 0.042504] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.042519] smp: Bringing up secondary CPUs ...
[ 0.042593] x86: Booting SMP configuration:
[ 0.042594] .... node #0, CPUs: 0000001 #2 #3 0000004 0000005 0000006 0000007
[ 0.056056] smp: Brought up 1 node, 8 CPUs
[ 0.056056] smpboot: Max logical packages: 1
[ 0.056056] smpboot: Total of 8 processors activated (36719.82 BogoMIPS)
[ 0.060328] devtmpfs: initialized
[ 0.060328] x86/mm: Memory block size: 128MB
[ 0.060704] PM: Registering ACPI NVS region [mem 0xc8bf7000-0xc910dfff] (5337088 bytes)
[ 0.060704] PM: Registering ACPI NVS region [mem 0xc9878000-0xc98bafff] (274432 bytes)
[ 0.060704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.060704] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.060704] pinctrl core: initialized pinctrl subsystem
[ 0.060704] NET: Registered protocol family 16
[ 0.060704] audit: initializing netlink subsys (disabled)
[ 0.060704] audit: type=2000 audit(1526576237.060:1): state=initialized audit_enabled=0 res=1
[ 0.060704] cpuidle: using governor ladder
[ 0.060704] cpuidle: using governor menu
[ 0.060704] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.060704] ACPI: bus type PCI registered
[ 0.060704] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.060704] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.060704] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.060704] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.060704] PCI: Using configuration type 1 for base access
[ 0.060704] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.060872] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.060874] ACPI: Added _OSI(Module Device)
[ 0.060874] ACPI: Added _OSI(Processor Device)
[ 0.060874] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.060874] ACPI: Added OSI(Processor Aggregator Device)
[ 0.060874] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.068918] ACPI: Dynamic OEM Table Load:
[ 0.068925] ACPI: SSDT 0xFFFF8D0A6DB6A000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.069080] ACPI: Dynamic OEM Table Load:
[ 0.069080] ACPI: SSDT 0xFFFF8D0A6DB8E400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.069080] ACPI: Dynamic OEM Table Load:
[ 0.069080] ACPI: SSDT 0xFFFF8D0A6DB45600 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.069385] ACPI: EC: EC started
[ 0.069385] ACPI: EC: interrupt blocked
[ 0.069492] ACPI: _SB.PCI0.LPCB.EC0: Used as first EC
[ 0.069494] ACPI: _SB.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, ECDATA=0x62
[ 0.069495] ACPI: _SB.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.069496] ACPI: Interpreter enabled
[ 0.069519] ACPI: (supports S0 S3 S4 S5)
[ 0.069520] ACPI: Using IOAPIC for interrupt routing
[ 0.069544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.072191] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.266340] ACPI: Power Resource [FN00] (off)
[ 0.266413] ACPI: Power Resource [FN01] (off)
[ 0.266484] ACPI: Power Resource [FN02] (off)
[ 0.266553] ACPI: Power Resource [FN03] (off)
[ 0.266625] ACPI: Power Resource [FN04] (off)
[ 0.267190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.267195] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.267375] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.267519] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.267520] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.268000] PCI host bridge to bus 0000:00
[ 0.268004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.268005] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.268007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.268008] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.268010] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.268011] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.268013] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.268014] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
[ 0.268016] pcibus 0000:00: root bus resource [bus 00-3e]
[ 0.268025] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.268125] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.268162] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.268247] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.268258] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.268263] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.268268] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.268279] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.268396] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.268421] pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.268495] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.268576] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.268601] pci 0000:00:16.0: reg 0x10: [mem 0xf791a000-0xf791a00f 64bit]
[ 0.268679] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.268765] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.268789] pci 0000:00:1a.0: reg 0x10: [mem 0xf7918000-0xf79183ff]
[ 0.268876] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.268958] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.268980] pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
[ 0.269047] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.269137] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.269224] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.269311] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.269396] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.269489] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.269512] pci 0000:00:1d.0: reg 0x10: [mem 0xf7917000-0xf79173ff]
[ 0.269599] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.269679] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.269862] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.269882] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.269890] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.269898] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.269907] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.269915] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.269923] pci 0000:00:1f.2: reg 0x24: [mem 0xf7916000-0xf79167ff]
[ 0.269967] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.270043] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.270064] pci 0000:00:1f.3: reg 0x10: [mem 0xf7915000-0xf79150ff 64bit]
[ 0.270085] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.270222] pci 0000:01:00.0: [10de:0de3] type 00 class 0x030000
[ 0.270239] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.270250] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.270261] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.270269] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.270277] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.270283] pci 0000:01:00.0: enabling Extended Tags
[ 0.284022] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.284027] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.284031] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284047] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284174] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.284304] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.284425] pci 0000:02:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.284500] pci 0000:02:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.284860] pci 0000:02:00.0: supports D1 D2
[ 0.284861] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300092] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.300096] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.300101] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.300191] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 0.300248] pci 0000:03:00.0: reg 0x10: [mem 0xf7800000-0xf787ffff 64bit]
[ 0.300313] pci 0000:03:00.0: reg 0x30: [mem 0xf7880000-0xf788ffff pref]
[ 0.300454] pci 0000:03:00.0: supports D1 D2
[ 0.300455] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312053] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.312059] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.396271] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396322] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396419] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396467] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.396515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled.
[ 0.396565] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396614] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15)
[ 0.396978] ACPI: EC: interrupt unblocked
[ 0.396984] ACPI: EC: event unblocked
[ 0.396991] ACPI: _SB.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, ECDATA=0x62
[ 0.396993] ACPI: _SB.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.397051] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.397051] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.397051] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.397051] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.397051] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.397051] vgaarb: loaded
[ 0.397051] EDAC MC: Ver: 3.0.0
[ 0.397051] Registered efivars operations
[ 0.414281] PCI: Using ACPI for IRQ routing
[ 0.414281] PCI: pci_cache_line_size set to 64 bytes
[ 0.414281] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.414281] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0xc85db000-0xcbffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0xc8bf7000-0xcbffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0xc9878000-0xcbffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0xc9cc2000-0xcbffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.414281] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 0.416084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.416084] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.419074] clocksource: Switched to clocksource hpet
[ 0.424807] VFS: Disk quotas dquot_6.6.0
[ 0.424824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.424915] AppArmor: AppArmor Filesystem Enabled
[ 0.424931] pnp: PnP ACPI init
[ 0.425032] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.425037] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.425114] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.425116] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.425117] system 00:01: [io 0xffff] has been reserved
[ 0.425119] system 00:01: [io 0xffff] has been reserved
[ 0.425121] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.425122] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.425124] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.425125] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.425129] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.425152] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.425197] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.425201] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.425252] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.425254] system 00:04: [mem 0xff000000-0xff000fff] has been reserved
[ 0.425257] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.425313] pnp 00:05: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
[ 0.425346] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.508266] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.508268] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.508270] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.508272] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.508273] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.508275] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.508277] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.508279] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.508280] system 00:07: [mem 0xff010000-0xffffffff] has been reserved
[ 0.508282] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.508284] system 00:07: [mem 0xcf200000-0xcf200fff] has been reserved
[ 0.508288] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.508429] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.508431] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.508434] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.508474] pnp: PnP ACPI: found 9 devices
[ 0.514674] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.514701] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.514703] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.514706] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.514708] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.514712] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.514715] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.514720] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.514728] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.514733] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.514743] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.514745] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.514746] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.514748] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.514749] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.514751] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.514752] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.514754] pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff window]
[ 0.514756] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.514757] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.514759] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.514760] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.514762] pci_bus 0000:02: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.514763] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.514870] NET: Registered protocol family 2
[ 0.515007] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.515129] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.515252] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.515283] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.515305] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.515358] NET: Registered protocol family 1
[ 0.515370] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.564146] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.564181] Unpacking initramfs...
[ 1.110681] Freeing initrd memory: 32444K
[ 1.110735] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.110738] software IO TLB [mem 0xb8b30000-0xbcb30000] (64MB) mapped at [00000000fb2b6b58-00000000e2ffde48]
[ 1.111454] Initialise system trusted keyrings
[ 1.111511] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.112557] zbud: loaded
[ 1.473080] Key type asymmetric registered
[ 1.473081] Asymmetric key parser 'x509' registered
[ 1.473107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.473149] io scheduler noop registered
[ 1.473150] io scheduler deadline registered
[ 1.473188] io scheduler cfq registered (default)
[ 1.473189] io scheduler mq-deadline registered
[ 1.473771] efifb: probing for efifb
[ 1.473790] efifb: framebuffer at 0xd0000000, using 5632k, total 5632k
[ 1.473791] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.473791] efifb: scrolling: redraw
[ 1.473793] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.477241] Console: switching to colour frame buffer device 200x56
[ 1.480591] fb0: EFI VGA frame buffer device
[ 1.480605] intel_idle: MWAIT substates: 0x21120
[ 1.480606] intel_idle: v0.4.1 model 0x3A
[ 1.480880] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.481242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.481617] Linux agpgart interface v0.103
[ 1.481667] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.481667] AMD IOMMUv2 functionality not available on this system
[ 1.482177] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.494662] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.494666] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.494772] mousedev: PS/2 mouse device common for all mice
[ 1.494967] rtc_cmos 00:02: RTC can wake from S4
[ 1.495092] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.495122] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.495131] intel_pstate: Intel P-state driver initializing
[ 1.495529] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.496358] NET: Registered protocol family 10
[ 1.505412] Segment Routing with IPv6
[ 1.505445] mip6: Mobile IPv6
[ 1.505449] NET: Registered protocol family 17
[ 1.505454] mpls_gso: MPLS GSO support
[ 1.506630] microcode: sig=0x306a4, pf=0x10, revision=0x7
[ 1.506932] microcode: Microcode Update Driver: v2.2.
[ 1.506949] sched_clock: Marking stable (1506922665, 0)->(1492539052, 14383613)
[ 1.507442] registered taskstats version 1
[ 1.507444] Loading compiled-in X.509 certificates
[ 1.507688] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.554265] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 1.554279] zswap: loaded using pool lzo/zbud
[ 1.554604] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.554606] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.554903] rtc_cmos 00:02: setting system clock to 2018-05-17 16:57:19 UTC (1526576239)
[ 1.556610] Freeing unused kernel memory: 1516K
[ 1.556611] Write protecting the kernel read-only data: 16384k
[ 1.557304] Freeing unused kernel memory: 2012K
[ 1.559952] Freeing unused kernel memory: 1012K
[ 1.568598] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.568598] x86/mm: Checking user space page tables
[ 1.573696] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.700062] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.700280] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.700282] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.701204] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.701206] ACPI: Thermal Zone [TZ01] (56 C)
[ 1.705245] ACPI: bus type USB registered
[ 1.705282] usbcore: registered new interface driver usbfs
[ 1.705296] usbcore: registered new interface driver hub
[ 1.705335] usbcore: registered new device driver usb
[ 1.705345] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.705353] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.705670] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.706099] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000f12ad300, 50:46:5d:cf:ad:a0, XID 0c900800 IRQ 26
[ 1.706101] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.707796] SCSI subsystem initialized
[ 1.708079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.710381] ehci-pci: EHCI PCI platform driver
[ 1.713133] libata version 3.00 loaded.
[ 1.713667] AVX version of gcm_enc/dec engaged.
[ 1.713667] AES CTR mode by8 optimization enabled
[ 1.730251] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 1.789168] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.789182] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.789202] ehci-pci 0000:00:1a.0: debug port 2
[ 1.793119] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.793149] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7918000
[ 1.808040] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.808141] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.808145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.808147] usb usb1: Product: EHCI Host Controller
[ 1.808150] usb usb1: Manufacturer: Linux 4.15.0-kali2-amd64 ehci_hcd
[ 1.808153] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.808510] hub 1-0:1.0: USB hub found
[ 1.808524] hub 1-0:1.0: 2 ports detected
[ 1.809071] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.809080] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.809100] ehci-pci 0000:00:1d.0: debug port 2
[ 1.813015] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.813044] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7917000
[ 1.828035] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.828153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.828156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.828159] usb usb2: Product: EHCI Host Controller
[ 1.828162] usb usb2: Manufacturer: Linux 4.15.0-kali2-amd64 ehci_hcd
[ 1.828165] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.828505] hub 2-0:1.0: USB hub found
[ 1.828519] hub 2-0:1.0: 2 ports detected
[ 1.829157] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.829172] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.830310] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.830321] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.830553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.830557] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.830559] usb usb3: Product: xHCI Host Controller
[ 1.830562] usb usb3: Manufacturer: Linux 4.15.0-kali2-amd64 xhci-hcd
[ 1.830565] usb usb3: SerialNumber: 0000:00:14.0
[ 1.830901] hub 3-0:1.0: USB hub found
[ 1.830926] hub 3-0:1.0: 4 ports detected
[ 1.831753] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.831764] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.831867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.831872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.831876] usb usb4: Product: xHCI Host Controller
[ 1.831881] usb usb4: Manufacturer: Linux 4.15.0-kali2-amd64 xhci-hcd
[ 1.831885] usb usb4: SerialNumber: 0000:00:14.0
[ 1.832183] hub 4-0:1.0: USB hub found
[ 1.832205] hub 4-0:1.0: 4 ports detected
[ 1.833043] ahci 0000:00:1f.2: version 3.0
[ 1.833367] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.843479] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.843485] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.865336] scsi host0: ahci
[ 1.865822] scsi host1: ahci
[ 1.866279] scsi host2: ahci
[ 1.866582] scsi host3: ahci
[ 1.866762] scsi host4: ahci
[ 1.867035] scsi host5: ahci
[ 1.867138] ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 28
[ 1.867142] ata2: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916180 irq 28
[ 1.867145] ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 28
[ 1.867147] ata4: DUMMY
[ 1.867148] ata5: DUMMY
[ 1.867149] ata6: DUMMY
[ 2.140043] tsc: Refined TSC clocksource calibration: 2294.786 MHz
[ 2.140060] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
[ 2.144035] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.164003] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.183588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.184938] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.184945] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.184951] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.195216] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
[ 2.195221] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.204969] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.204976] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.204982] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.215163] ata1.00: configured for UDMA/133
[ 2.215582] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
[ 2.301771] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.301775] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.302307] hub 1-1:1.0: USB hub found
[ 2.302464] hub 1-1:1.0: 6 ports detected
[ 2.320595] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.320600] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.321072] hub 2-1:1.0: USB hub found
[ 2.321243] hub 2-1:1.0: 6 ports detected
[ 2.531437] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.538258] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.538264] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.538269] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.544667] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/133
[ 2.544671] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.551534] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.551540] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.551544] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.557943] ata2.00: configured for UDMA/133
[ 2.558352] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 2.588042] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.698765] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=3005
[ 2.698770] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.698773] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 2.698776] usb 1-1.1: Manufacturer: Atheros Communications
[ 2.698778] usb 1-1.1: SerialNumber: Alaska Day 2006
[ 2.780047] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.840497] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 2.861513] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 2.875481] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.878906] ata3.00: ATAPI: HL-DT-ST DVDRAM GT70N, AS00, max UDMA/133
[ 2.882685] psmouse serio1: elantech: Elan sample query result 05, 24, 64
[ 2.884497] ata3.00: configured for UDMA/133
[ 2.888862] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT70N AS00 PQ: 0 ANSI: 5
[ 2.900912] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0138
[ 2.900917] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.900920] usb 1-1.3: Product: USB2.0-CRW
[ 2.900923] usb 1-1.3: Manufacturer: Generic
[ 2.900926] usb 1-1.3: SerialNumber: 20090516388200000
[ 2.912484] usbcore: registered new interface driver usb-storage
[ 2.914063] usbcore: registered new interface driver uas
[ 2.914853] ums-realtek 1-1.3:1.0: USB Mass Storage device detected
[ 2.924846] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.924849] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.924882] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.924886] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.924887] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.924920] sd 0:0:0:0: [sda] Write Protect is off
[ 2.924925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.924940] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.924967] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.926714] sda: sda1 sda2 sda3 sda4 sda5
[ 2.927115] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.936571] scsi host6: usb-storage 1-1.3:1.0
[ 2.936682] usbcore: registered new interface driver ums-realtek
[ 2.964136] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.964141] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.964563] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.997234] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
[ 3.074546] usb 1-1.3: USB disconnect, device number 4
[ 3.164292] clocksource: Switched to clocksource tsc
[ 3.519939] sdb: sdb2 < sdb5 >
[ 3.521233] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.819880] PM: Starting manual resume from disk
[ 3.820018] PM: Image not found (code -22)
[ 4.171372] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 4.276552] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.322209] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.340589] systemd[1]: Detected architecture x86-64.
[ 4.343065] systemd[1]: Set hostname to <PmKKbYpW>.
[ 4.411650] systemd[1]: Listening on udev Control Socket.
[ 4.411724] systemd[1]: Listening on udev Kernel Socket.
[ 4.411771] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.411832] systemd[1]: Listening on Journal Socket.
[ 4.412988] systemd[1]: Starting udev Coldplug all Devices...
[ 4.413576] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.413675] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.436188] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 4.531479] systemd-journald[336]: Received request to flush runtime journal from PID 1
[ 4.531668] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 4.538350] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.538364] ACPI: Power Button [PWRB]
[ 4.538430] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 4.538441] ACPI: Lid Switch [LID0]
[ 4.538493] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 4.538503] ACPI: Sleep Button [SLPB]
[ 4.538555] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.538565] ACPI: Power Button [PWRF]
[ 4.540066] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input7
[ 4.549263] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.628018] ACPI: AC Adapter [ACAD] (on-line)
[ 4.637273] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.637279] EFI Variables Facility v0.08 2004-May-17
[ 4.639785] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.640145] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.640336] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.646765] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.651339] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[ 4.651505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.651508] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 4.651513] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 4.651518] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.651519] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 4.651524] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 4.651682] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.651683] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[ 4.651688] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
[ 4.651692] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.651693] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.657330] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.657332] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.657333] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.657333] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.688328] pstore: using zlib compression
[ 4.693629] pstore: Registered efi as persistent store backend
[ 4.717787] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.718375] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.718720] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[ 4.718766] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 4.718821] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.718823] cfg80211: failed to load regulatory.db
[ 4.769071] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.774064] asus_wmi: ASUS WMI generic driver loaded
[ 4.776656] asus_wmi: Initialization: 0x1
[ 4.776731] asus_wmi: BIOS WMI version: 7.8
[ 4.776797] asus_wmi: SFUN value: 0x4a0077
[ 4.777876] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[ 4.778194] snd_hda_intel 0000:00:1b.0: failed to add i915 component master (-19)
[ 4.779696] asus_wmi: Number of fans: 0
[ 4.789390] Bluetooth: Core ver 2.22
[ 4.789403] NET: Registered protocol family 31
[ 4.789404] Bluetooth: HCI device and connection manager initialized
[ 4.789407] Bluetooth: HCI socket layer initialized
[ 4.789411] Bluetooth: L2CAP socket layer initialized
[ 4.789416] Bluetooth: SCO socket layer initialized
[ 4.793942] usbcore: registered new interface driver btusb
[ 4.795337] ath9k 0000:03:00.0: enabling device (0100 -> 0102)
[ 4.795767] iTCO_vendor_support: vendor-support=0
[ 4.796190] usb 1-1.1: firmware: direct-loading firmware ar3k/AthrBT_0x01020200.dfu
[ 4.796230] ath: phy0: Disable PLL PowerSave
[ 4.796418] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.796458] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.796572] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.800339] intel_rapl: Found RAPL domain package
[ 4.800341] intel_rapl: Found RAPL domain core
[ 4.800342] intel_rapl: Found RAPL domain uncore
[ 4.800347] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 4.803976] Adding 8998908k swap on /dev/sda3. Priority:-2 extents:1 across:8998908k SSFS
[ 4.805589] ath: phy0: ASPM enabled: 0x43
[ 4.805591] ath: EEPROM regdomain: 0x60
[ 4.805591] ath: EEPROM indicates we should expect a direct regpair map
[ 4.805593] ath: Country alpha2 being used: 00
[ 4.805594] ath: Regpair used: 0x60
[ 4.805957] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.805959] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.805961] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.805962] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.805963] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.805964] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.805966] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.818263] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec
[ 4.818509] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec
[ 4.821403] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.821521] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.821572] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.821621] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.821753] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb38fc1480000, irq=17
[ 4.840714] usb 1-1.1: firmware: direct-loading firmware ar3k/ramps_0x0102020040.dfu
[ 4.844337] usbcore: registered new interface driver ath3k
[ 4.866392] usb 1-1.1: USB disconnect, device number 3
[ 4.911996] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 4.912040] ACPI: Battery Slot [BAT1] (battery present)
[ 5.091975] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 5.298717] bbswitch: loading out-of-tree module taints kernel.
[ 5.298969] bbswitch: version 0.8
[ 5.298973] bbswitch: Found integrated VGA device 0000:00:02.0: _SB.PCI0.GFX0
[ 5.298977] bbswitch: Found discrete VGA device 0000:01:00.0: _SB_.PCI0.PEG0.PEGP
[ 5.298987] ACPI Warning: _SB.PCI0.PEG0.PEGP._DSM: Argument 0000004 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 5.299065] bbswitch: detected an Optimus _DSM function
[ 5.299074] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 5.299130] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 5.302351] bbswitch: disabling discrete graphics
[ 5.637149] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.637933] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 5.744829] random: crng init done
[ 5.746084] r8169 0000:02:00.0 eth0: link down
[ 5.746140] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.749495] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.764457] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.790259] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.854459] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.283972] usb 1-1.1: device descriptor read/64, error -110
[ 18.150035] r8169 0000:02:00.0 eth0: link down
[ 18.150111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.174766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.531643] fuse init (API version 7.26)
[ 19.907871] rfkill: input handler disabled
[ 21.115963] usb 1-1.1: device not accepting address 5, error -32
[ 21.195965] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 21.309908] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=3005
[ 21.309911] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 21.309912] usb 1-1.1: Product: Bluetooth USB Host Controller
[ 21.309913] usb 1-1.1: Manufacturer: Atheros Communications
[ 21.309914] usb 1-1.1: SerialNumber: Alaska Day 2006
[ 80.498102] r8169 0000:02:00.0 eth0: link down
[ 80.498174] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.524851] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@uWrqLbzD:~# dmesg | acpi
bash: acpi: command not found
root@uWrqLbzD:~# dmesg | grep acpi
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.060704] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.267195] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.267375] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.267519] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.267520] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.514674] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns