could you give output from dmesg | grep error journactl -xe also what exacly error you get from xrand maybe its just graphic card driver is messing with you or settings of graphic has been changed after update maybe try to load earlier kernel maybe kernel is problem

when I type dmesg | grep error journactl -xe
It gives me the following error ==>
grep: option requires an argument -- 'e'
Usage: grep [OPTION]... PATTERNS [FILE]...
Try 'grep --help' for more information.

could you give output from dmesg | grep error journactl -xe also what exacly error you get from xrand maybe its just graphic card driver is messing with you or settings of graphic has been changed after update maybe try to load earlier kernel maybe kernel is problem try dmesg and journalctl separately

dmesg error:
[ 3.909908] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.285210] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.300368] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Oct 8 2018 09:18:41 version 7.45.154 (nexmon.org: 2.2.2-195-g01e0-1) FWID 01-4fbe0b04
[ 4.961359] proc: Bad value for 'hidepid'
[ 5.655959] proc: Bad value for 'hidepid'
[ 203.870429] proc: Bad value for 'hidepid'

" dmesg | grep error journactl -xe "
This command is showing me error in teminal

error.png (46,934 bytes)   

error.png (46,934 bytes)   

dmesg | grep error enter journalctl -xe enter type those commands separetely

besides read my comment to the end and dump output of those commands separetely

errors in output of journalctl -xe
░░
░░ The process' exit code is 'exited' and its exit status is 64.
Jun 07 11:28:46 kali systemd[1]: fstrim.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The unit fstrim.service has entered the 'failed' state with result 'exit-code'.
Jun 07 11:28:46 kali systemd[1]: Failed to start Discard unused blocks on filesystems from /etc>
░░ Subject: A start job for unit fstrim.service has failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit fstrim.service has finished with a failure.
░░
░░ The job identifier is 1983 and the job result is failed.
Jun 07 11:34:16 kali dhclient[1477]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Jun 07 11:34:23 kali dhclient[1477]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
Jun 07 11:34:27 kali dhclient[1477]: No DHCPOFFERS received.
Jun 07 11:34:27 kali dhclient[1477]: No working leases in persistent database - sleeping.
Jun 07 11:35:01 kali CRON[131967]: pam_unix(cron:session): session opened for user root(uid=0) >
Jun 07 11:35:01 kali CRON[131968]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 >
Jun 07 11:35:01 kali CRON[131967]: pam_unix(cron:session): session closed for user root
Jun 07 11:35:32 kali sudo[132472]: pam_unix(sudo:auth): authentication failure; logname= uid=10>
Jun 07 11:35:35 kali sudo[132472]: Midhun : TTY=pts/0 ; PWD=/home/Midhun ; USER=root ; COMMAN>
Jun 07 11:35:35 kali sudo[132472]: pam_unix(sudo:session): session opened for user root(uid=0) >

output of dmesg :
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.4.83-Re4son-v8l+ (root@kali) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) 0000001 SMP PREEMPT Sat May 15 07:55:31 UTC 2021
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 1012736
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 12032 pages used for memmap
[ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 31 pages/cpu s89304 r8192 d29480 u126976
[ 0.000000] pcpu-alloc: s89304 r8192 d29480 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:A7:2D:11 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.fiq_fix_enable=2 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait rootflags=noload net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x37400000-0x3b400000] (64MB)
[ 0.000000] Memory: 3822192K/4050944K available (10044K kernel code, 1136K rwdata, 3416K rodata, 1024K init, 1217K bss, 163216K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 32043 entries in 126 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4bc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000219] Console: colour dummy device 80x25
[ 0.000587] printk: console [tty1] enabled
[ 0.000641] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000673] pid_max: default: 32768 minimum: 301
[ 0.000810] LSM: Security Framework initializing
[ 0.001029] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001098] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002229] Disabling memory control group subsystem
[ 0.003648] ASID allocator initialised with 32768 entries
[ 0.003891] rcu: Hierarchical SRCU implementation.
[ 0.004547] EFI services will not be available.
[ 0.004989] smp: Bringing up secondary CPUs ...
[ 0.005845] Detected PIPT I-cache on CPU1
[ 0.005908] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.006883] Detected PIPT I-cache on CPU2
[ 0.006923] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.007843] Detected PIPT I-cache on CPU3
[ 0.007881] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.008094] smp: Brought up 1 node, 4 CPUs
[ 0.008171] SMP: Total of 4 processors activated.
[ 0.008192] CPU features: detected: 32-bit EL0 Support
[ 0.008212] CPU features: detected: CRC32 instructions
[ 0.031150] CPU: All CPU(s) started at EL2
[ 0.031213] alternatives: patching kernel code
[ 0.032754] devtmpfs: initialized
[ 0.041781] Enabled cp15_barrier support
[ 0.041831] Enabled setend support
[ 0.042254] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.042301] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.044437] pinctrl core: initialized pinctrl subsystem
[ 0.045107] DMI not present or invalid.
[ 0.045451] NET: Registered protocol family 16
[ 0.047946] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.047997] audit: initializing netlink subsys (disabled)
[ 0.048330] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[ 0.049019] cpuidle: using governor menu
[ 0.049232] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.049463] Serial: AMBA PL011 UART driver
[ 0.052448] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.064182] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-08 14:31, variant start
[ 0.068194] raspberrypi-firmware soc:firmware: Firmware hash is 194a85abd768c7334bbadc3f1911c10a7d18ed14
[ 0.108828] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.111992] vgaarb: loaded
[ 0.112414] SCSI subsystem initialized
[ 0.112620] usbcore: registered new interface driver usbfs
[ 0.112680] usbcore: registered new interface driver hub
[ 0.112794] usbcore: registered new device driver usb
[ 0.113072] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 0.114551] clocksource: Switched to clocksource arch_sys_counter
[ 0.852200] VFS: Disk quotas dquot_6.6.0
[ 0.852307] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.852468] FS-Cache: Loaded
[ 0.852670] CacheFiles: Loaded
[ 0.860748] thermal_sys: Registered thermal governor 'step_wise'
[ 0.861079] NET: Registered protocol family 2
[ 0.861958] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.862022] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.862234] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.862751] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.862990] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.863065] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.863365] NET: Registered protocol family 1
[ 0.864093] RPC: Registered named UNIX socket transport module.
[ 0.864117] RPC: Registered udp transport module.
[ 0.864135] RPC: Registered tcp transport module.
[ 0.864152] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.864180] PCI: CLS 0 bytes, default 64
[ 0.865881] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.866109] kvm: Limiting the IPA size due to kernel Virtual Address limit
[ 0.866131] kvm [1]: IPA Size Limit: 43bits
[ 0.866978] kvm [1]: vgic interrupt IRQ1
[ 0.867218] kvm [1]: Hyp mode initialized successfully
[ 0.869899] Initialise system trusted keyrings
[ 0.870153] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.878512] FS-Cache: Netfs 'nfs' registered for caching
[ 0.879293] NFS: Registering the id_resolver key type
[ 0.879344] Key type id_resolver registered
[ 0.879363] Key type id_legacy registered
[ 0.879391] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.904058] Key type asymmetric registered
[ 0.904084] Asymmetric key parser 'x509' registered
[ 0.904141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.904356] io scheduler mq-deadline registered
[ 0.904378] io scheduler kyber registered
[ 0.907703] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.907741] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.907820] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 0.907890] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[ 0.956651] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[ 0.956965] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.956994] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.957020] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.957085] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.957312] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.960959] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.961106] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.961505] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.964855] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.964888] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.964975] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.965004] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.965116] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.965181] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 0.965798] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.996045] Console: switching to colour frame buffer device 170x48
[ 1.002081] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1360x768
[ 1.007367] iproc-rng200 fe104000.rng: hwrng registered
[ 1.007753] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.008590] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.009015] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.019075] brd: module loaded
[ 1.030975] loop: module loaded
[ 1.032341] Loading iSCSI transport class v2.0-870.
[ 1.034174] libphy: Fixed MDIO Bus: probed
[ 1.034816] bcmgenet fd580000.ethernet: failed to get enet clock
[ 1.034897] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.034973] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[ 1.035052] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[ 1.035137] bcmgenet: Skipping UMAC reset
[ 1.046582] libphy: bcmgenet MII bus: probed
[ 1.094632] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.095592] usbcore: registered new interface driver r8152
[ 1.095719] usbcore: registered new interface driver lan78xx
[ 1.097529] usbcore: registered new interface driver smsc95xx
[ 1.099746] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.101442] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.104105] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
[ 1.107032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.108733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.110418] usb usb1: Product: xHCI Host Controller
[ 1.112124] usb usb1: Manufacturer: Linux 5.4.83-Re4son-v8l+ xhci-hcd
[ 1.113811] usb usb1: SerialNumber: 0000:01:00.0
[ 1.116084] hub 1-0:1.0: USB hub found
[ 1.117819] hub 1-0:1.0: 1 port detected
[ 1.119971] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.121621] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.123325] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.125398] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.127133] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128827] usb usb2: Product: xHCI Host Controller
[ 1.130554] usb usb2: Manufacturer: Linux 5.4.83-Re4son-v8l+ xhci-hcd
[ 1.132249] usb usb2: SerialNumber: 0000:01:00.0
[ 1.134432] hub 2-0:1.0: USB hub found
[ 1.136193] hub 2-0:1.0: 4 ports detected
[ 1.139128] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.141039] dwc_otg: FIQ enabled
[ 1.141048] dwc_otg: NAK holdoff enabled
[ 1.141055] dwc_otg: FIQ split-transaction FSM enabled
[ 1.141066] Module dwc_common_port init
[ 1.141567] usbcore: registered new interface driver uas
[ 1.143411] usbcore: registered new interface driver usb-storage
[ 1.145282] mousedev: PS/2 mouse device common for all mice
[ 1.148538] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.153263] sdhci: Secure Digital Host Controller Interface driver
[ 1.155036] sdhci: Copyright(c) Pierre Ossman
[ 1.157242] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.158814] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.161690] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.162622] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.163504] usbcore: registered new interface driver usbhid
[ 1.164298] usbhid: USB HID core driver
[ 1.165737] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 1.168855] Initializing XFRM netlink socket
[ 1.169791] NET: Registered protocol family 17
[ 1.170762] Key type dns_resolver registered
[ 1.171921] registered taskstats version 1
[ 1.172887] Loading compiled-in X.509 certificates
[ 1.173933] Key type ._fscrypt registered
[ 1.174981] Key type .fscrypt registered
[ 1.176492] Key type encrypted registered
[ 1.181916] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.182894] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 14, base_baud = 0) is a PL011 rev2
[ 1.189711] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.191068] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.191971] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.237847] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.240328] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.243150] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.247245] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.250148] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.259125] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.261812] of_cfs_init
[ 1.263079] of_cfs_init: OK
[ 1.265101] Waiting for root device /dev/mmcblk0p2...
[ 1.281355] random: fast init done
[ 1.318689] mmc1: new high speed SDIO card at address 0001
[ 1.362705] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 1.363978] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 1.367394] mmcblk0: p1 p2
[ 1.377478] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[ 1.393783] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: noload
[ 1.395008] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
[ 1.401253] devtmpfs: mounted
[ 1.404482] Freeing unused kernel memory: 1024K
[ 1.414679] Run /sbin/init as init process
[ 1.454601] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.605195] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.606734] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.608191] usb 1-1: Product: USB2.0 Hub
[ 1.611208] hub 1-1:1.0: USB hub found
[ 1.612910] hub 1-1:1.0: 4 ports detected
[ 1.867790] systemd[1]: System time before build time, advancing clock.
[ 1.906592] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd
[ 1.957070] NET: Registered protocol family 10
[ 1.958721] Segment Routing with IPv6
[ 1.974708] cgroup2: Unknown parameter 'memory_recursiveprot'
[ 1.995947] systemd[1]: systemd 247.3-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.000008] systemd[1]: Detected architecture arm64.
[ 2.014977] usb 1-1.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[ 2.016533] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.018173] usb 1-1.3: Product: Dell MS116 USB Optical Mouse
[ 2.019844] usb 1-1.3: Manufacturer: PixArt
[ 2.029324] input: PixArt Dell MS116 USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:301A.0001/input/input0
[ 2.029596] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:01:00.0-1.3/input0
[ 2.035084] systemd[1]: Set hostname to <kali>.
[ 2.110612] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[ 2.219013] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c31d, bcdDevice=66.01
[ 2.220257] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.221464] usb 1-1.4: Product: USB Keyboard
[ 2.222743] usb 1-1.4: Manufacturer: Logitech
[ 2.237361] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C31D.0002/input/input1
[ 2.303357] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:00.0-1.4/input0
[ 2.320711] input: Logitech USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31D.0003/input/input2
[ 2.382769] input: Logitech USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C31D.0003/input/input3
[ 2.385458] hid-generic 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:00.0-1.4/input1
[ 2.460075] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 2.581841] systemd[1]: /etc/systemd/system/regenerate_ssh_host_keys.service:7: Unknown key name 'PartOf' in section 'Service', ignoring.
[ 2.583680] systemd[1]: /etc/systemd/system/regenerate_ssh_host_keys.service:8: Unknown key name 'Before' in section 'Service', ignoring.
[ 2.639954] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.642524] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.645496] systemd[1]: Created slice system-getty.slice.
[ 2.649588] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.651493] systemd[1]: Created slice system-modprobe.slice.
[ 2.654583] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.656387] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.659791] systemd[1]: Created slice User and Session Slice.
[ 2.662981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.666521] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.669750] systemd[1]: Reached target User and Group Name Lookups.
[ 2.672860] systemd[1]: Reached target Slices.
[ 2.675912] systemd[1]: Reached target TLS tunnels for network services - per-config-file target.
[ 2.678929] systemd[1]: Reached target Swap.
[ 2.688124] systemd[1]: Listening on Syslog Socket.
[ 2.691369] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.694504] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.698449] systemd[1]: Listening on Journal Audit Socket.
[ 2.702228] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.706062] systemd[1]: Listening on Journal Socket.
[ 2.711800] systemd[1]: Listening on udev Control Socket.
[ 2.714515] systemd[1]: Listening on udev Kernel Socket.
[ 2.717187] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 2.720179] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.724909] systemd[1]: Mounting RPC Pipe File System...
[ 2.730149] systemd[1]: Mounting Kernel Debug File System...
[ 2.735037] systemd[1]: Mounting Kernel Trace File System...
[ 2.737821] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 2.747024] systemd[1]: Starting Set the console keyboard layout...
[ 2.752276] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.758677] systemd[1]: Starting Load Kernel Module configfs...
[ 2.764868] systemd[1]: Starting Load Kernel Module drm...
[ 2.770226] systemd[1]: Starting Load Kernel Module fuse...
[ 2.777058] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.780164] systemd[1]: Starting File System Check on Root Device...
[ 2.786706] systemd[1]: Starting Journal Service...
[ 2.824966] systemd[1]: Starting Load Kernel Modules...
[ 2.826142] fuse: init (API version 7.31)
[ 2.832858] systemd[1]: Starting Coldplug All udev Devices...
[ 2.840745] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.844109] systemd[1]: Mounted RPC Pipe File System.
[ 2.847231] systemd[1]: Mounted Kernel Debug File System.
[ 2.851861] systemd[1]: Mounted Kernel Trace File System.
[ 2.855440] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.858955] systemd[1]: [email protected]: Succeeded.
[ 2.860733] systemd[1]: Finished Load Kernel Module configfs.
[ 2.864331] systemd[1]: [email protected]: Succeeded.
[ 2.865939] systemd[1]: Finished Load Kernel Module drm.
[ 2.869424] systemd[1]: [email protected]: Succeeded.
[ 2.871356] systemd[1]: Finished Load Kernel Module fuse.
[ 2.874761] systemd[1]: Finished Load Kernel Modules.
[ 2.880011] systemd[1]: Mounting FUSE Control File System...
[ 2.885206] systemd[1]: Mounting Kernel Configuration File System...
[ 2.889937] systemd[1]: Started File System Check Daemon to report status.
[ 2.895257] systemd[1]: Starting Apply Kernel Variables...
[ 2.900724] systemd[1]: Mounted FUSE Control File System.
[ 2.904092] systemd[1]: Mounted Kernel Configuration File System.
[ 2.921069] systemd[1]: Finished File System Check on Root Device.
[ 2.926303] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.947055] systemd[1]: Started Journal Service.
[ 2.968526] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 3.001649] systemd-journald[161]: Received client request to flush runtime journal.
[ 3.464698] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 3.466388] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 3.470626] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 3.472268] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 3.507911] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.510159] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

[ 3.521910] [vc_sm_connected_init]: installed successfully
[ 3.549538] mc: Linux media interface: v0.10
[ 3.597463] videodev: Linux video capture interface: v2.00
[ 3.619093] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.630140] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 3.636880] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.636882] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.655814] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 3.694173] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.697502] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.701421] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.713918] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 3.715798] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 3.718008] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 3.719841] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 3.722894] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 3.726943] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 3.728285] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 3.729483] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 3.733728] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 3.735281] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 3.739821] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 3.741514] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 3.757805] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 3.759526] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 3.763081] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 3.792361] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.839839] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.877759] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 3.906958] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.914292] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.915361] usbcore: registered new interface driver brcmfmac
[ 3.981537] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[ 4.244720] random: crng init done
[ 4.244758] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.321883] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.348096] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Oct 8 2018 09:18:41 version 7.45.154 (nexmon.org: 2.2.2-195-g01e0-1) FWID 01-4fbe0b04
[ 4.669159] proc: Bad value for 'hidepid'
[ 4.693608] bcmgenet: Skipping UMAC reset
[ 4.701626] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[ 4.708445] bcmgenet fd580000.ethernet eth0: Link is Down
[ 5.015131] proc: Bad value for 'hidepid'
[ 5.719453] proc: Bad value for 'hidepid'
[ 8.798794] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 8.804924] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.973201] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 2969.942210] proc: Bad value for 'hidepid'
[ 3044.397142] proc: Bad value for 'hidepid'
[ 3271.505148] proc: Bad value for 'hidepid'

output of dmesg | grep error
[ 3.981537] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2

solution for error from dmesg https://www.raspberrypi.org/forums/viewtopic.php?p=1723945 and for monitor resolution try update kernel or reinstall or update driver for graphic card

OP found a solution