View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0000812Kali LinuxGeneral Bugpublic2013-12-28 13:582018-01-29 11:51
Reporterpsychobunny Assigned Tog0tmi1k  
PrioritylowSeverityminorReproducibilityalways
Status closedResolutionsuspended 
PlatformarmelOSKaliOS Version1.0
Product Version1.0.5 
Summary0000812: USB Ralink 3070 still not working in version 1.0.5 / also not when upgrading from version 1.0
Description

I want to use the USB Ralink 3070 USB dongle to connect to my Raspberry PI
it seems to recognize the device but the is no wlan0 create.

Steps To Reproduce

I have installed 1.0.5 from the image downloaded 27-12-2013 twice.
I have installed the 1.0 there is was available.
then I upgraded the device like in issue 505 was mentioned.
but that was no luck for me. after the upgrade the wlan0 was gone again.

Additional Information

root@kali:/var/cache/apt/archives# ifconfig
eth0 Link encap:Ethernet HWaddr b8:27:eb:e8:c8:40
inet addr:192.168.126.17 Bcast:192.168.126.255 Mask:255.255.255.0
inet6 addr: fe80::ba27:ebff:fee8:c840/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2624 errors:0 dropped:0 overruns:0 frame:0
TX packets:1648 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:254263 (248.3 KiB) TX bytes:279730 (273.1 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

[ 9348.943927] usb 1-1.2: USB disconnect, device number 4
[ 9350.454753] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 9350.602449] usb 1-1.2: New USB device found, idVendor=148f, idProduct=3070
[ 9350.610224] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9350.620582] usb 1-1.2: Product: 802.11 n WLAN
[ 9350.625301] usb 1-1.2: Manufacturer: Ralink
[ 9350.724795] usb 1-1.2: reset high-speed USB device number 6 using dwc_otg
[ 9350.885669] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 9350.889211] Registered led device: rt2800usb-phy1::radio
[ 9350.889681] Registered led device: rt2800usb-phy1::assoc
[ 9350.890211] Registered led device: rt2800usb-phy1::quality

root@kali:/var/cache/apt/archives# uname -ra
Linux kali 3.6.11+ 0000007 PREEMPT Mon Mar 11 16:46:44 EDT 2013 armv6l GNU/Linux

root@kali:/var/cache/apt/archives# lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 006: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 001 Device 005: ID 0f30:0001 Jess Technology Co., Ltd

Activities

steev

steev

2014-01-03 21:11

manager   ~0001261

Are you sure that the device isn't working? ifconfig alone does NOT show all devices, you need to run "ifconfig -a" - just plugging in a device does not bring it up.

Also, an upgrade from 1.0 will not work, you will need to download the 1.0.5 and start from there, because the 1.0.5 image uses a different kernel config and we do not package the kernels for the ARM devices.

I've tested a number of usb wifi devices with my rpi here, and if you are absolutely not getting them to work, make sure you are NOT powering the rpi via a USB port but actually using a decent AC adapter.
psychobunny

psychobunny

2014-01-04 15:55

reporter   ~0001262

ok was not aware of that.
I'll reload the 1.0.5 version. I'm using a decent AC power supply already.

thanks
kind regards
Bauke
steev

steev

2015-05-17 03:31

manager   ~0003304

Is this still an issue for you with the latest version(s)? 1.0.9 or 1.1.1 (soon to be out)?
g0tmi1k

g0tmi1k

2018-01-29 11:51

administrator   ~0008054

Due to the age of the OS (Kali Moto [v1], Kali Safi [v2], Kali Rolling 2016.x), these legacy versions are no longer supported.
We will be closing this ticket due to inactivity.

Please could you see if you are able to replicate this issue with the latest version of Kali Linux - https://www.kali.org/downloads/)?

If you are still facing the same problem, feel free to re-open the ticket. If you choose to do this, could you provide more information to the issue you are facing,and also give information about your setup?
For more information, please read: https://kali.training/topic/filing-a-good-bug-report/

Issue History

Date Modified Username Field Change
2013-12-28 13:58 psychobunny New Issue
2014-01-03 21:11 steev Note Added: 0001261
2014-01-04 15:55 psychobunny Note Added: 0001262
2015-05-17 03:31 steev Note Added: 0003304
2018-01-29 11:51 g0tmi1k Assigned To => g0tmi1k
2018-01-29 11:51 g0tmi1k Status new => closed
2018-01-29 11:51 g0tmi1k Resolution open => suspended
2018-01-29 11:51 g0tmi1k Note Added: 0008054